[Intel-gfx] [PATCH 2/2] drm/i915: preserve the PBC bits of TRANS_CHICKEN2

Imre Deak imre.deak at intel.com
Wed Apr 10 17:23:25 CEST 2013


On Mon, 2013-04-08 at 15:48 -0300, Paulo Zanoni wrote:
> From: Paulo Zanoni <paulo.r.zanoni at intel.com>
> 
> Bits 30 and 24:0 are PBC, so don't zero them. Some of the other bits
> are being zeroed, but I couldn't find a reason for this, so leave them
> as they are for now to avoid regressions.
> 
> Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
> ---
>  drivers/gpu/drm/i915/i915_reg.h |    8 ++++++--
>  drivers/gpu/drm/i915/intel_pm.c |    7 ++++++-
>  2 files changed, 12 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 759b1b8..f4d6673 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -3949,8 +3949,12 @@
>  #define _TRANSA_CHICKEN2	 0xf0064
>  #define _TRANSB_CHICKEN2	 0xf1064
>  #define TRANS_CHICKEN2(pipe) _PIPE(pipe, _TRANSA_CHICKEN2, _TRANSB_CHICKEN2)
> -#define  TRANS_CHICKEN2_TIMING_OVERRIDE		(1<<31)
> -#define  TRANS_CHICKEN2_FDI_POLARITY_REVERSED	(1<<29)
> +#define  TRANS_CHICKEN2_TIMING_OVERRIDE			(1<<31)
> +#define  TRANS_CHICKEN2_FDI_POLARITY_REVERSED		(1<<29)
> +#define  TRANS_CHICKEN2_FRAME_START_DELAY_MASK		(3<<27)
> +#define  TRANS_CHICKEN2_DISABLE_DEEP_COLOR_COUNTER	(1<<26)
> +#define  TRANS_CHICKEN2_DISABLE_DEEP_COLOR_MODESWITCH	(1<<25)
> +#define  TRANS_CHICKEN2_PBC				(1<<30 | 0x1ffffff)

The above _PBC value seems to be redundant. In any case on both patches:
Reviewed-by: Imre Deak <imre.deak at intel.com>

>  
>  #define SOUTH_CHICKEN1		0xc2000
>  #define  FDIA_PHASE_SYNC_SHIFT_OVR	19
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index ce3d892..e4ead41 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -3589,9 +3589,14 @@ static void cpt_init_clock_gating(struct drm_device *dev)
>  	 * downward, on (only) LVDS of some HP laptops with IVY.
>  	 */
>  	for_each_pipe(pipe) {
> -		val = TRANS_CHICKEN2_TIMING_OVERRIDE;
> +		val = I915_READ(TRANS_CHICKEN2(pipe));
> +		val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
> +		val &= ~TRANS_CHICKEN2_FDI_POLARITY_REVERSED;
>  		if (dev_priv->fdi_rx_polarity_inverted)
>  			val |= TRANS_CHICKEN2_FDI_POLARITY_REVERSED;
> +		val &= ~TRANS_CHICKEN2_FRAME_START_DELAY_MASK;
> +		val &= ~TRANS_CHICKEN2_DISABLE_DEEP_COLOR_COUNTER;
> +		val &= ~TRANS_CHICKEN2_DISABLE_DEEP_COLOR_MODESWITCH;
>  		I915_WRITE(TRANS_CHICKEN2(pipe), val);
>  	}
>  	/* WADP0ClockGatingDisable */





More information about the Intel-gfx mailing list