[Intel-gfx] [PATCH] drm/i915: Scale ring, rather than ia, frequency on Haswell
Chris Wilson
chris at chris-wilson.co.uk
Wed Apr 10 21:45:11 CEST 2013
Haswell introduces a separate frequency domain for the ring (uncore). So
where we used to increase the CPU (IA) clock with GPU busyness, we now
need to scale the ring frequency directly instead. As the ring limits
our memory bandwidth, it is vital for performance that when the GPU is
busy, we increase the frequency of the ring to increase the available
memory bandwidth.
v2: Fix the algorithm to actually use the scaled gpu frequency for the ring.
Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes at virtuousgeek.org>
---
drivers/gpu/drm/i915/i915_debugfs.c | 7 +++++--
drivers/gpu/drm/i915/i915_reg.h | 4 ++++
drivers/gpu/drm/i915/intel_pm.c | 39 ++++++++++++++++++++++-------------
3 files changed, 34 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 7da45aa..6220d97 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -1357,7 +1357,7 @@ static int i915_ring_freq_table(struct seq_file *m, void *unused)
if (ret)
return ret;
- seq_printf(m, "GPU freq (MHz)\tEffective CPU freq (MHz)\n");
+ seq_printf(m, "GPU freq (MHz)\tEffective CPU freq (MHz)\tEffective Ring freq (MHz)\n");
for (gpu_freq = dev_priv->rps.min_delay;
gpu_freq <= dev_priv->rps.max_delay;
@@ -1366,7 +1366,10 @@ static int i915_ring_freq_table(struct seq_file *m, void *unused)
sandybridge_pcode_read(dev_priv,
GEN6_PCODE_READ_MIN_FREQ_TABLE,
&ia_freq);
- seq_printf(m, "%d\t\t%d\n", gpu_freq * GT_FREQUENCY_MULTIPLIER, ia_freq * 100);
+ seq_printf(m, "%d\t\t%d\t\t\t\t%d\n",
+ gpu_freq * GT_FREQUENCY_MULTIPLIER,
+ ((ia_freq >> 0) & 0xff) * 100,
+ ((ia_freq >> 8) & 0xff) * 100);
}
mutex_unlock(&dev_priv->rps.hw_lock);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index e0fc070..077d40f 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1210,6 +1210,9 @@
#define MCHBAR_MIRROR_BASE_SNB 0x140000
+/* Memory controller frequency in MCHBAR for Haswell (possible SNB+) */
+#define DCLK 0x5e04
+
/** 915-945 and GM965 MCH register controlling DRAM channel access */
#define DCC 0x10200
#define DCC_ADDRESSING_MODE_SINGLE_CHANNEL (0 << 0)
@@ -4390,6 +4393,7 @@
#define GEN6_DECODE_RC6_VID(vids) (((vids) * 5) + 245)
#define GEN6_PCODE_DATA 0x138128
#define GEN6_PCODE_FREQ_IA_RATIO_SHIFT 8
+#define GEN6_PCODE_FREQ_RING_RATIO_SHIFT 16
#define VLV_IOSF_DOORBELL_REQ 0x182100
#define IOSF_DEVFN_SHIFT 24
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index baea4fc..89746e1 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2684,8 +2684,8 @@ static void gen6_update_ring_freq(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int min_freq = 15;
- int gpu_freq;
- unsigned int ia_freq, max_ia_freq;
+ unsigned int gpu_freq;
+ unsigned int max_ia_freq, max_ring_freq;
int scaling_factor = 180;
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
@@ -2701,6 +2701,10 @@ static void gen6_update_ring_freq(struct drm_device *dev)
/* Convert from kHz to MHz */
max_ia_freq /= 1000;
+ max_ring_freq = I915_READ(MCHBAR_MIRROR_BASE_SNB + DCLK);
+ /* convert DDR frequency from units of 133.3MHz to bandwidth */
+ max_ring_freq = (2 * 4 * max_ring_freq + 2)/ 3;
+
/*
* For each potential GPU frequency, load a ring frequency we'd like
* to use for memory access. We do this by specifying the IA frequency
@@ -2709,21 +2713,28 @@ static void gen6_update_ring_freq(struct drm_device *dev)
for (gpu_freq = dev_priv->rps.max_delay; gpu_freq >= dev_priv->rps.min_delay;
gpu_freq--) {
int diff = dev_priv->rps.max_delay - gpu_freq;
-
- /*
- * For GPU frequencies less than 750MHz, just use the lowest
- * ring freq.
- */
- if (gpu_freq < min_freq)
- ia_freq = 800;
- else
- ia_freq = max_ia_freq - ((diff * scaling_factor) / 2);
- ia_freq = DIV_ROUND_CLOSEST(ia_freq, 100);
- ia_freq <<= GEN6_PCODE_FREQ_IA_RATIO_SHIFT;
+ unsigned int ia_freq = 0, ring_freq = 0;
+
+ if (IS_HASWELL(dev)) {
+ ring_freq = (gpu_freq * 5 + 3) / 4;
+ ring_freq = max(max_ring_freq, ring_freq);
+ } else {
+ /*
+ * For GPU frequencies less than 750MHz,
+ * just use the lowest ring freq.
+ */
+ if (gpu_freq < min_freq)
+ ia_freq = 800;
+ else
+ ia_freq = max_ia_freq - ((diff * scaling_factor) / 2);
+ ia_freq = DIV_ROUND_CLOSEST(ia_freq, 100);
+ }
sandybridge_pcode_write(dev_priv,
GEN6_PCODE_WRITE_MIN_FREQ_TABLE,
- ia_freq | gpu_freq);
+ ia_freq << GEN6_PCODE_FREQ_IA_RATIO_SHIFT |
+ ring_freq << GEN6_PCODE_FREQ_RING_RATIO_SHIFT |
+ gpu_freq);
}
}
--
1.7.10.4
More information about the Intel-gfx
mailing list