[Intel-gfx] [PATCH 3/5] drm/i915: Print plane, pipe, port names as alphabetical insted of decimal
ville.syrjala at linux.intel.com
ville.syrjala at linux.intel.com
Wed Apr 17 16:48:49 CEST 2013
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
Alway use the alphabetical names in debug/error messages for planes,
pipes and ports, instead of using decimal numbers occasionally.
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/intel_ddi.c | 10 ++++-----
drivers/gpu/drm/i915/intel_display.c | 42 ++++++++++++++++++------------------
drivers/gpu/drm/i915/intel_pm.c | 26 +++++++++++-----------
3 files changed, 39 insertions(+), 39 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 22524cb..c8e8c15 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -748,8 +748,8 @@ intel_ddi_get_crtc_encoder(struct drm_crtc *crtc)
}
if (num_encoders != 1)
- WARN(1, "%d encoders on crtc for pipe %d\n", num_encoders,
- intel_crtc->pipe);
+ WARN(1, "%d encoders on crtc for pipe %c\n", num_encoders,
+ pipe_name(intel_crtc->pipe));
BUG_ON(ret == NULL);
return ret;
@@ -1047,8 +1047,8 @@ void intel_ddi_enable_transcoder_func(struct drm_crtc *crtc)
}
} else {
- WARN(1, "Invalid encoder type %d for pipe %d\n",
- intel_encoder->type, pipe);
+ WARN(1, "Invalid encoder type %d for pipe %c\n",
+ intel_encoder->type, pipe_name(pipe));
}
I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp);
@@ -1148,7 +1148,7 @@ bool intel_ddi_get_hw_state(struct intel_encoder *encoder,
}
}
- DRM_DEBUG_KMS("No pipe for ddi port %i found\n", port);
+ DRM_DEBUG_KMS("No pipe for ddi port %c found\n", port_name(port));
return false;
}
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d984bba..982fddd 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2101,7 +2101,7 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
case 1:
break;
default:
- DRM_ERROR("Can't update plane %d in SAREA\n", plane);
+ DRM_ERROR("Can't update plane %c in SAREA\n", plane_name(plane));
return -EINVAL;
}
@@ -2198,7 +2198,7 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
case 2:
break;
default:
- DRM_ERROR("Can't update plane %d in SAREA\n", plane);
+ DRM_ERROR("Can't update plane %c in SAREA\n", plane_name(plane));
return -EINVAL;
}
@@ -2389,9 +2389,9 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
}
if (intel_crtc->plane > INTEL_INFO(dev)->num_pipes) {
- DRM_ERROR("no plane for crtc: plane %d, num_pipes %d\n",
- intel_crtc->plane,
- INTEL_INFO(dev)->num_pipes);
+ DRM_ERROR("no plane for crtc: plane %c, num_pipes %d\n",
+ plane_name(intel_crtc->plane),
+ INTEL_INFO(dev)->num_pipes);
return -EINVAL;
}
@@ -3299,7 +3299,7 @@ static struct intel_pch_pll *intel_get_pch_pll(struct intel_crtc *intel_crtc, u3
found:
intel_crtc->pch_pll = pll;
pll->refcount++;
- DRM_DEBUG_DRIVER("using pll %d for pipe %d\n", i, intel_crtc->pipe);
+ DRM_DEBUG_DRIVER("using pll %d for pipe %c\n", i, pipe_name(intel_crtc->pipe));
prepare: /* separate function? */
DRM_DEBUG_DRIVER("switching PLL %x off\n", pll->pll_reg);
@@ -3324,7 +3324,7 @@ void intel_cpt_verify_modeset(struct drm_device *dev, int pipe)
udelay(500);
if (wait_for(I915_READ(dslreg) != temp, 5)) {
if (wait_for(I915_READ(dslreg) != temp, 5))
- DRM_ERROR("mode set failed: pipe %d stuck\n", pipe);
+ DRM_ERROR("mode set failed: pipe %c stuck\n", pipe_name(pipe));
}
}
@@ -5344,11 +5344,11 @@ static bool ironlake_check_fdi_lanes(struct intel_crtc *intel_crtc)
struct intel_crtc *pipe_B_crtc =
to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
- DRM_DEBUG_KMS("checking fdi config on pipe %i, lanes %i\n",
- intel_crtc->pipe, intel_crtc->fdi_lanes);
+ DRM_DEBUG_KMS("checking fdi config on pipe %c, lanes %i\n",
+ pipe_name(intel_crtc->pipe), intel_crtc->fdi_lanes);
if (intel_crtc->fdi_lanes > 4) {
- DRM_DEBUG_KMS("invalid fdi lane config on pipe %i: %i lanes\n",
- intel_crtc->pipe, intel_crtc->fdi_lanes);
+ DRM_DEBUG_KMS("invalid fdi lane config on pipe %c: %i lanes\n",
+ pipe_name(intel_crtc->pipe), intel_crtc->fdi_lanes);
/* Clamp lanes to avoid programming the hw with bogus values. */
intel_crtc->fdi_lanes = 4;
@@ -5364,8 +5364,8 @@ static bool ironlake_check_fdi_lanes(struct intel_crtc *intel_crtc)
case PIPE_B:
if (dev_priv->pipe_to_crtc_mapping[PIPE_C]->enabled &&
intel_crtc->fdi_lanes > 2) {
- DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %i: %i lanes\n",
- intel_crtc->pipe, intel_crtc->fdi_lanes);
+ DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
+ pipe_name(intel_crtc->pipe), intel_crtc->fdi_lanes);
/* Clamp lanes to avoid programming the hw with bogus values. */
intel_crtc->fdi_lanes = 2;
@@ -5381,8 +5381,8 @@ static bool ironlake_check_fdi_lanes(struct intel_crtc *intel_crtc)
case PIPE_C:
if (!pipe_B_crtc->base.enabled || pipe_B_crtc->fdi_lanes <= 2) {
if (intel_crtc->fdi_lanes > 2) {
- DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %i: %i lanes\n",
- intel_crtc->pipe, intel_crtc->fdi_lanes);
+ DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
+ pipe_name(intel_crtc->pipe), intel_crtc->fdi_lanes);
/* Clamp lanes to avoid programming the hw with bogus values. */
intel_crtc->fdi_lanes = 2;
@@ -5647,7 +5647,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
dpll = ironlake_compute_dpll(intel_crtc, &clock, &fp, &reduced_clock,
has_reduced_clock ? &fp2 : NULL);
- DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
+ DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe_name(pipe));
drm_mode_debug_printmodeline(mode);
/* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
@@ -5656,8 +5656,8 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
pll = intel_get_pch_pll(intel_crtc, dpll, fp);
if (pll == NULL) {
- DRM_DEBUG_DRIVER("failed to find PLL for pipe %d\n",
- pipe);
+ DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n",
+ pipe_name(pipe));
return -EINVAL;
}
} else
@@ -5821,7 +5821,7 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
/* determine panel color depth */
dither = intel_crtc->config.dither;
- DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
+ DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe_name(pipe));
drm_mode_debug_printmodeline(mode);
if (intel_crtc->config.has_dp_encoder)
@@ -9049,8 +9049,8 @@ void intel_modeset_init(struct drm_device *dev)
for (j = 0; j < dev_priv->num_plane; j++) {
ret = intel_plane_init(dev, i, j);
if (ret)
- DRM_DEBUG_KMS("pipe %d plane %d init failed: %d\n",
- i, j, ret);
+ DRM_DEBUG_KMS("pipe %c plane %d init failed: %d\n",
+ pipe_name(i), j, ret);
}
}
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index e34ad96..413877d 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -113,8 +113,8 @@ static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
fbc_ctl |= obj->fence_reg;
I915_WRITE(FBC_CONTROL, fbc_ctl);
- DRM_DEBUG_KMS("enabled FBC, pitch %d, yoff %d, plane %d, ",
- cfb_pitch, crtc->y, intel_crtc->plane);
+ DRM_DEBUG_KMS("enabled FBC, pitch %d, yoff %d, plane %c, ",
+ cfb_pitch, crtc->y, plane_name(intel_crtc->plane));
}
static bool i8xx_fbc_enabled(struct drm_device *dev)
@@ -148,7 +148,7 @@ static void g4x_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
/* enable it... */
I915_WRITE(DPFC_CONTROL, I915_READ(DPFC_CONTROL) | DPFC_CTL_EN);
- DRM_DEBUG_KMS("enabled fbc on plane %d\n", intel_crtc->plane);
+ DRM_DEBUG_KMS("enabled fbc on plane %c\n", plane_name(intel_crtc->plane));
}
static void g4x_disable_fbc(struct drm_device *dev)
@@ -228,7 +228,7 @@ static void ironlake_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
sandybridge_blit_fbc_update(dev);
}
- DRM_DEBUG_KMS("enabled fbc on plane %d\n", intel_crtc->plane);
+ DRM_DEBUG_KMS("enabled fbc on plane %c\n", plane_name(intel_crtc->plane));
}
static void ironlake_disable_fbc(struct drm_device *dev)
@@ -2146,15 +2146,15 @@ static void sandybridge_update_sprite_wm(struct drm_device *dev, int pipe,
&sandybridge_display_wm_info,
latency, &sprite_wm);
if (!ret) {
- DRM_DEBUG_KMS("failed to compute sprite wm for pipe %d\n",
- pipe);
+ DRM_DEBUG_KMS("failed to compute sprite wm for pipe %c\n",
+ pipe_name(pipe));
return;
}
val = I915_READ(reg);
val &= ~WM0_PIPE_SPRITE_MASK;
I915_WRITE(reg, val | (sprite_wm << WM0_PIPE_SPRITE_SHIFT));
- DRM_DEBUG_KMS("sprite watermarks For pipe %d - %d\n", pipe, sprite_wm);
+ DRM_DEBUG_KMS("sprite watermarks For pipe %c - %d\n", pipe_name(pipe), sprite_wm);
ret = sandybridge_compute_sprite_srwm(dev, pipe, sprite_width,
@@ -2163,8 +2163,8 @@ static void sandybridge_update_sprite_wm(struct drm_device *dev, int pipe,
SNB_READ_WM1_LATENCY() * 500,
&sprite_wm);
if (!ret) {
- DRM_DEBUG_KMS("failed to compute sprite lp1 wm on pipe %d\n",
- pipe);
+ DRM_DEBUG_KMS("failed to compute sprite lp1 wm on pipe %c\n",
+ pipe_name(pipe));
return;
}
I915_WRITE(WM1S_LP_ILK, sprite_wm);
@@ -2179,8 +2179,8 @@ static void sandybridge_update_sprite_wm(struct drm_device *dev, int pipe,
SNB_READ_WM2_LATENCY() * 500,
&sprite_wm);
if (!ret) {
- DRM_DEBUG_KMS("failed to compute sprite lp2 wm on pipe %d\n",
- pipe);
+ DRM_DEBUG_KMS("failed to compute sprite lp2 wm on pipe %c\n",
+ pipe_name(pipe));
return;
}
I915_WRITE(WM2S_LP_IVB, sprite_wm);
@@ -2191,8 +2191,8 @@ static void sandybridge_update_sprite_wm(struct drm_device *dev, int pipe,
SNB_READ_WM3_LATENCY() * 500,
&sprite_wm);
if (!ret) {
- DRM_DEBUG_KMS("failed to compute sprite lp3 wm on pipe %d\n",
- pipe);
+ DRM_DEBUG_KMS("failed to compute sprite lp3 wm on pipe %c\n",
+ pipe_name(pipe));
return;
}
I915_WRITE(WM3S_LP_IVB, sprite_wm);
--
1.8.1.5
More information about the Intel-gfx
mailing list