[Intel-gfx] [PATCH 1/5] drm/i915: VLV GPU frequency to opcode functions

[Jesse Barnes]

When requesting frequency changes or querying status from the Punit, we
need to use an opcode that corresponds to the frequency, taking into
account the memory frequency.

Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
---
 drivers/gpu/drm/i915/i915_drv.h |    2 ++
 drivers/gpu/drm/i915/intel_pm.c |   56 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 58 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 15d0a3a..abb0655 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1887,6 +1887,8 @@ int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u8 mbox, u32 *val)
 int sandybridge_pcode_write(struct drm_i915_private *dev_priv, u8 mbox, u32 val);
 int valleyview_punit_read(struct drm_i915_private *dev_priv, u8 addr, u32 *val);
 int valleyview_punit_write(struct drm_i915_private *dev_priv, u8 addr, u32 val);
+int vlv_gpu_freq(int ddr_freq, int val);
+int vlv_freq_opcode(int ddr_freq, int val);
 
 #define __i915_read(x, y) \
 	u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg);
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 413877d..f802368 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -4620,3 +4620,59 @@ int valleyview_punit_write(struct drm_i915_private *dev_priv, u8 addr, u32 val)
 {
 	return vlv_punit_rw(dev_priv, PUNIT_OPCODE_REG_WRITE, addr, &val);
 }
+
+int vlv_gpu_freq(int ddr_freq, int val)
+{
+	int mult, base;
+
+	switch (ddr_freq) {
+	case 800:
+		mult = 20;
+		base = 120;
+		break;
+	case 1066:
+		mult = 22;
+		base = 133;
+		break;
+	case 1333:
+		mult = 21;
+		base = 125;
+		break;
+	default:
+		return -1;
+	}
+
+	return ((val - 0xbd) * mult) + base;
+}
+
+int vlv_freq_opcode(int ddr_freq, int val)
+{
+	int mult, base;
+
+	switch (ddr_freq) {
+	case 800:
+		mult = 20;
+		base = 120;
+		break;
+	case 1066:
+		mult = 22;
+		base = 133;
+		break;
+	case 1333:
+		mult = 21;
+		base = 125;
+		break;
+	default:
+		return -1;
+	}
+
+	val /= mult;
+	val -= base / mult;
+	val += 0xbd;
+
+	if (val > 0xea)
+		val = 0xea;
+
+	return val;
+}
+
-- 
1.7.10.4