[Intel-gfx] [PATCH 01/15] drm/i915: fixup 12bpc hdmi dotclock handling

[Daniel Vetter]

We need to multiply the hdmi port dotclock by 1.5x since it's not
really a dotclock, but the 10/8 encoding bitclock divided by 10.

Also add correct limit checks for the dotclock and reject modes which
don't fit. HDMI 1.4 would allow more, but our hw doesn't support that
unfortunately :(

Somehow I suspect 12bpc hdmi output never really worked - we really
need an i-g-t testcase to check all the different pixel modes and
outputs.

v2: Fixup the adjusted port clock handling - we need to make sure that
the fdi link code still gets the real pixelclock.

v3: g4x/vlv don't support 12bpc hdmi output so drop the bogus comment.

Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
 drivers/gpu/drm/i915/intel_hdmi.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 53ce8a5..a8273c7 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -783,6 +783,7 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
 	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
 	struct drm_device *dev = encoder->base.dev;
 	struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
+	int clock_12bpc = pipe_config->requested_mode.clock * 3 / 2;
 
 	if (intel_hdmi->color_range_auto) {
 		/* See CEA-861-E - 5.1 Default Encoding Parameters */
@@ -802,16 +803,28 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
 	/*
 	 * HDMI is either 12 or 8, so if the display lets 10bpc sneak
 	 * through, clamp it down. Note that g4x/vlv don't support 12bpc hdmi
-	 * outputs.
+	 * outputs. We also need to check that the higher clock still fits
+	 * within limits.
 	 */
-	if (pipe_config->pipe_bpp > 8*3 && HAS_PCH_SPLIT(dev)) {
+	if (pipe_config->pipe_bpp > 8*3 && clock_12bpc < 225000
+	    && HAS_PCH_SPLIT(dev)) {
 		DRM_DEBUG_KMS("forcing bpc to 12 for HDMI\n");
 		pipe_config->pipe_bpp = 12*3;
+
+		/* Need to adjust the port link by 1.5x for 12bpc. */
+		adjusted_mode->clock = clock_12bpc;
+		pipe_config->pixel_target_clock =
+			pipe_config->requested_mode.clock;
 	} else {
 		DRM_DEBUG_KMS("forcing bpc to 8 for HDMI\n");
 		pipe_config->pipe_bpp = 8*3;
 	}
 
+	if (adjusted_mode->clock > 225000) {
+		DRM_DEBUG_KMS("too high HDMI clock, rejecting mode\n");
+		return false;
+	}
+
 	return true;
 }
 
-- 
1.7.11.7