[Intel-gfx] [PATCH] drm/i915: hw state readout support for pipe_config->fdi_lanes
Daniel Vetter
daniel.vetter at ffwll.ch
Wed Apr 24 15:30:28 CEST 2013
v2: Introduce some nice #defines for the FDI lane width fields and put
them to good use. Suggested by Ville.
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
drivers/gpu/drm/i915/i915_reg.h | 11 +++--------
drivers/gpu/drm/i915/intel_ddi.c | 2 +-
drivers/gpu/drm/i915/intel_display.c | 38 ++++++++++++++++++++++++++----------
3 files changed, 32 insertions(+), 19 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 894d729..e96ee12 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4138,10 +4138,9 @@
#define FDI_LINK_TRAIN_600MV_3_5DB_SNB_B (0x39<<22)
#define FDI_LINK_TRAIN_800MV_0DB_SNB_B (0x38<<22)
#define FDI_LINK_TRAIN_VOL_EMP_MASK (0x3f<<22)
-#define FDI_DP_PORT_WIDTH_X1 (0<<19)
-#define FDI_DP_PORT_WIDTH_X2 (1<<19)
-#define FDI_DP_PORT_WIDTH_X3 (2<<19)
-#define FDI_DP_PORT_WIDTH_X4 (3<<19)
+#define FDI_DP_PORT_WIDTH_SHIFT 19
+#define FDI_DP_PORT_WIDTH_MASK (7 << 19)
+#define FDI_DP_PORT_WIDTH(width) (((width) - 1) << 19)
#define FDI_TX_ENHANCE_FRAME_ENABLE (1<<18)
/* Ironlake: hardwired to 1 */
#define FDI_TX_PLL_ENABLE (1<<14)
@@ -4166,7 +4165,6 @@
/* train, dp width same as FDI_TX */
#define FDI_FS_ERRC_ENABLE (1<<27)
#define FDI_FE_ERRC_ENABLE (1<<26)
-#define FDI_DP_PORT_WIDTH_X8 (7<<19)
#define FDI_RX_POLARITY_REVERSED_LPT (1<<16)
#define FDI_8BPC (0<<16)
#define FDI_10BPC (1<<16)
@@ -4188,9 +4186,6 @@
#define FDI_LINK_TRAIN_PATTERN_IDLE_CPT (2<<8)
#define FDI_LINK_TRAIN_NORMAL_CPT (3<<8)
#define FDI_LINK_TRAIN_PATTERN_MASK_CPT (3<<8)
-/* LPT */
-#define FDI_PORT_WIDTH_2X_LPT (1<<19)
-#define FDI_PORT_WIDTH_1X_LPT (0<<19)
#define _FDI_RXA_MISC 0xf0010
#define _FDI_RXB_MISC 0xf1010
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 1ecb0f3..96354a5 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -182,7 +182,7 @@ void hsw_fdi_link_train(struct drm_crtc *crtc)
/* Enable the PCH Receiver FDI PLL */
rx_ctl_val = dev_priv->fdi_rx_config | FDI_RX_ENHANCE_FRAME_ENABLE |
FDI_RX_PLL_ENABLE |
- ((intel_crtc->config.fdi_lanes - 1) << 19);
+ FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
POSTING_READ(_FDI_RXA_CTL);
udelay(220);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 652c6b8..85ccd2d 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2419,8 +2419,8 @@ static void ironlake_fdi_link_train(struct drm_crtc *crtc)
/* enable CPU FDI TX and PCH FDI RX */
reg = FDI_TX_CTL(pipe);
temp = I915_READ(reg);
- temp &= ~(7 << 19);
- temp |= (intel_crtc->config.fdi_lanes - 1) << 19;
+ temp &= ~FDI_DP_PORT_WIDTH_SHIFT;
+ temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
temp &= ~FDI_LINK_TRAIN_NONE;
temp |= FDI_LINK_TRAIN_PATTERN_1;
I915_WRITE(reg, temp | FDI_TX_ENABLE);
@@ -2517,8 +2517,8 @@ static void gen6_fdi_link_train(struct drm_crtc *crtc)
/* enable CPU FDI TX and PCH FDI RX */
reg = FDI_TX_CTL(pipe);
temp = I915_READ(reg);
- temp &= ~(7 << 19);
- temp |= (intel_crtc->config.fdi_lanes - 1) << 19;
+ temp &= ~FDI_DP_PORT_WIDTH_MASK;
+ temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
temp &= ~FDI_LINK_TRAIN_NONE;
temp |= FDI_LINK_TRAIN_PATTERN_1;
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
@@ -2652,8 +2652,8 @@ static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
/* enable CPU FDI TX and PCH FDI RX */
reg = FDI_TX_CTL(pipe);
temp = I915_READ(reg);
- temp &= ~(7 << 19);
- temp |= (intel_crtc->config.fdi_lanes - 1) << 19;
+ temp &= ~FDI_DP_PORT_WIDTH_MASK;
+ temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
@@ -2754,8 +2754,8 @@ static void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc)
/* enable PCH FDI RX PLL, wait warmup plus DMI latency */
reg = FDI_RX_CTL(pipe);
temp = I915_READ(reg);
- temp &= ~((0x7 << 19) | (0x7 << 16));
- temp |= (intel_crtc->config.fdi_lanes - 1) << 19;
+ temp &= ~(FDI_DP_PORT_WIDTH_SHIFT | (0x7 << 16));
+ temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
@@ -5763,9 +5763,14 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
if (!(tmp & PIPECONF_ENABLE))
return false;
- if (I915_READ(TRANSCONF(crtc->pipe)) & TRANS_ENABLE)
+ if (I915_READ(TRANSCONF(crtc->pipe)) & TRANS_ENABLE) {
pipe_config->has_pch_encoder = true;
+ tmp = I915_READ(FDI_RX_CTL(crtc->pipe));
+ pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
+ FDI_DP_PORT_WIDTH_SHIFT) + 1;
+ }
+
return true;
}
@@ -5902,9 +5907,14 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
*/
tmp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
if ((tmp & TRANS_DDI_PORT_MASK) == TRANS_DDI_SELECT_PORT(PORT_E) &&
- I915_READ(TRANSCONF(PIPE_A)) & TRANS_ENABLE)
+ I915_READ(TRANSCONF(PIPE_A)) & TRANS_ENABLE) {
pipe_config->has_pch_encoder = true;
+ tmp = I915_READ(FDI_RX_CTL(PIPE_A));
+ pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
+ FDI_DP_PORT_WIDTH_SHIFT) + 1;
+ }
+
return true;
}
@@ -7866,6 +7876,14 @@ intel_pipe_config_compare(struct intel_crtc_config *current_config,
return false;
}
+ if (current_config->fdi_lanes != pipe_config->fdi_lanes) {
+ DRM_ERROR("mismatch in fdi_lanes "
+ "(expected %i, found %i)\n",
+ current_config->fdi_lanes,
+ pipe_config->fdi_lanes);
+ return false;
+ }
+
return true;
}
--
1.7.11.7
More information about the Intel-gfx
mailing list