[Intel-gfx] [PATCH] drm/i915: move fdi lane configuration checks ahead
Imre Deak
imre.deak at intel.com
Mon Apr 29 14:31:59 CEST 2013
On Mon, 2013-04-22 at 17:13 +0200, Daniel Vetter wrote:
> This nicely allows us to drop some hacks which have only been used
> to work around modeset failures due to lack of fdi lanes.
>
> v2: Implement proper checking for Haswell platforms - the fdi link to
> the LPT PCH has only 2 lanes. Note that we already filter out
> impossible modes in intel_crt_mode_valid. Unfortunately LPT does not
> support 6bpc on the fdi rx, so we can't pull clever tricks to squeeze
> in a few more modes.
>
> v2: Rebased on top of Ben Widawsky's num_pipes reorg.
>
> v3: Rebase on top of Ville's pipe debug output ocd rampage.
>
> v4: Fixup rebase fail spotted by Ville.
>
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
> ---
> drivers/gpu/drm/i915/intel_display.c | 129 ++++++++++++++++++-----------------
> 1 file changed, 65 insertions(+), 64 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 9ff3cf6..53d6e2f 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -3943,9 +3943,68 @@ bool intel_connector_get_hw_state(struct intel_connector *connector)
> return encoder->get_hw_state(encoder, &pipe);
> }
>
> -static void ironlake_fdi_compute_config(struct drm_device *dev,
> +static bool ironlake_check_fdi_lanes(struct drm_device *dev, enum pipe pipe,
> + struct intel_crtc_config *pipe_config)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct intel_crtc *pipe_B_crtc =
> + to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
> +
> + DRM_DEBUG_KMS("checking fdi config on pipe %c, lanes %i\n",
> + pipe_name(pipe), pipe_config->fdi_lanes);
> + if (pipe_config->fdi_lanes > 4) {
> + DRM_DEBUG_KMS("invalid fdi lane config on pipe %c: %i lanes\n",
> + pipe_name(pipe), pipe_config->fdi_lanes);
> + return false;
> + }
> +
> + if (IS_HASWELL(dev)) {
> + if (pipe_config->fdi_lanes > 2) {
> + DRM_DEBUG_KMS("only 2 lanes on haswell, required: %i lanes\n",
> + pipe_config->fdi_lanes);
> + return false;
> + } else {
> + return true;
> + }
> + }
> +
> + if (INTEL_INFO(dev)->num_pipes)
Copy&paste error I assume, should be num_pipes == 2. Otherwise:
Reviewed-by: Imre Deak <imre.deak at intel.com>
> + return true;
> +
> + /* Ivybridge 3 pipe is really complicated */
> + switch (pipe) {
> + case PIPE_A:
> + return true;
> + case PIPE_B:
> + if (dev_priv->pipe_to_crtc_mapping[PIPE_C]->enabled &&
> + pipe_config->fdi_lanes > 2) {
> + DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
> + pipe_name(pipe), pipe_config->fdi_lanes);
> + return false;
> + }
> + return true;
> + case PIPE_C:
> + if (!pipe_B_crtc->base.enabled ||
> + pipe_B_crtc->config.fdi_lanes <= 2) {
> + if (pipe_config->fdi_lanes > 2) {
> + DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
> + pipe_name(pipe), pipe_config->fdi_lanes);
> + return false;
> + }
> + } else {
> + DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n");
> + return false;
> + }
> + return true;
> + default:
> + BUG();
> + }
> +}
> +
> +static bool ironlake_fdi_compute_config(struct intel_crtc *intel_crtc,
> struct intel_crtc_config *pipe_config)
> {
> + struct drm_device *dev = intel_crtc->base.dev;
> struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
> int target_clock, lane, link_bw;
>
> @@ -3972,6 +4031,9 @@ static void ironlake_fdi_compute_config(struct drm_device *dev,
> link_bw *= pipe_config->pixel_multiplier;
> intel_link_compute_m_n(pipe_config->pipe_bpp, lane, target_clock,
> link_bw, &pipe_config->fdi_m_n);
> +
> + return ironlake_check_fdi_lanes(intel_crtc->base.dev,
> + intel_crtc->pipe, pipe_config);
> }
>
> static bool intel_crtc_compute_config(struct drm_crtc *crtc,
> @@ -4009,7 +4071,7 @@ static bool intel_crtc_compute_config(struct drm_crtc *crtc,
> }
>
> if (pipe_config->has_pch_encoder)
> - ironlake_fdi_compute_config(dev, pipe_config);
> + return ironlake_fdi_compute_config(to_intel_crtc(crtc), pipe_config);
>
> return true;
> }
> @@ -5393,63 +5455,6 @@ static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev)
> POSTING_READ(SOUTH_CHICKEN1);
> }
>
> -static bool ironlake_check_fdi_lanes(struct intel_crtc *intel_crtc)
> -{
> - struct drm_device *dev = intel_crtc->base.dev;
> - struct drm_i915_private *dev_priv = dev->dev_private;
> - struct intel_crtc *pipe_B_crtc =
> - to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
> -
> - DRM_DEBUG_KMS("checking fdi config on pipe %c, lanes %i\n",
> - pipe_name(intel_crtc->pipe), intel_crtc->config.fdi_lanes);
> - if (intel_crtc->config.fdi_lanes > 4) {
> - DRM_DEBUG_KMS("invalid fdi lane config on pipe %c: %i lanes\n",
> - pipe_name(intel_crtc->pipe), intel_crtc->config.fdi_lanes);
> - /* Clamp lanes to avoid programming the hw with bogus values. */
> - intel_crtc->config.fdi_lanes = 4;
> -
> - return false;
> - }
> -
> - if (INTEL_INFO(dev)->num_pipes == 2)
> - return true;
> -
> - switch (intel_crtc->pipe) {
> - case PIPE_A:
> - return true;
> - case PIPE_B:
> - if (dev_priv->pipe_to_crtc_mapping[PIPE_C]->enabled &&
> - intel_crtc->config.fdi_lanes > 2) {
> - DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
> - pipe_name(intel_crtc->pipe), intel_crtc->config.fdi_lanes);
> - /* Clamp lanes to avoid programming the hw with bogus values. */
> - intel_crtc->config.fdi_lanes = 2;
> -
> - return false;
> - }
> -
> - return true;
> - case PIPE_C:
> - if (!pipe_B_crtc->base.enabled || pipe_B_crtc->config.fdi_lanes <= 2) {
> - if (intel_crtc->config.fdi_lanes > 2) {
> - DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
> - pipe_name(intel_crtc->pipe), intel_crtc->config.fdi_lanes);
> - /* Clamp lanes to avoid programming the hw with bogus values. */
> - intel_crtc->config.fdi_lanes = 2;
> -
> - return false;
> - }
> - } else {
> - DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n");
> - return false;
> - }
> -
> - return true;
> - default:
> - BUG();
> - }
> -}
> -
> static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc)
> {
> struct drm_device *dev = intel_crtc->base.dev;
> @@ -5641,7 +5646,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
> bool is_lvds = false;
> struct intel_encoder *encoder;
> int ret;
> - bool fdi_config_ok;
>
> for_each_encoder_on_crtc(dev, crtc, encoder) {
> switch (encoder->type) {
> @@ -5734,14 +5738,11 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
>
> intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
>
> - /* Note, this also computes intel_crtc->fdi_lanes which is used below in
> - * ironlake_check_fdi_lanes. */
> if (intel_crtc->config.has_pch_encoder) {
> intel_cpu_transcoder_set_m_n(intel_crtc,
> &intel_crtc->config.fdi_m_n);
> }
>
> - fdi_config_ok = ironlake_check_fdi_lanes(intel_crtc);
> if (IS_IVYBRIDGE(dev))
> ivybridge_update_fdi_bc_bifurcation(intel_crtc);
>
> @@ -5757,7 +5758,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
>
> intel_update_linetime_watermarks(dev, pipe, adjusted_mode);
>
> - return fdi_config_ok ? ret : -EINVAL;
> + return ret;
> }
>
> static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
More information about the Intel-gfx
mailing list