[Intel-gfx] [PATCH 6/7] drm/i915: make SDVO TV-out work for multifunction devices

Daniel Vetter daniel.vetter at ffwll.ch
Tue Apr 30 14:01:45 CEST 2013


We need to track this correctly. While at it shovel the boolean
to track whether the sdvo is in tv mode or not into pipe_config.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36997
Tested-by: Pierre Assal <pierre.assal at verint.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36997
Tested-by: cancan,feng <cancan.feng at intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c | 8 +++-----
 drivers/gpu/drm/i915/intel_drv.h     | 5 ++++-
 drivers/gpu/drm/i915/intel_sdvo.c    | 8 ++------
 3 files changed, 9 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 44bcfae..ef0d27b 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4546,7 +4546,7 @@ static void i9xx_update_pll(struct intel_crtc *crtc,
 	if (INTEL_INFO(dev)->gen >= 4)
 		dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
 
-	if (is_sdvo && intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_TVOUT))
+	if (crtc->config.sdvo_tv_clock)
 		dpll |= PLL_REF_INPUT_TVCLKINBC;
 	else if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
 		 intel_panel_use_ssc(dev_priv) && num_connectors < 2)
@@ -5590,7 +5590,7 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
 	struct intel_encoder *intel_encoder;
 	uint32_t dpll;
 	int factor, num_connectors = 0;
-	bool is_lvds = false, is_sdvo = false, is_tv = false;
+	bool is_lvds = false, is_sdvo = false;
 
 	for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
 		switch (intel_encoder->type) {
@@ -5600,8 +5600,6 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
 		case INTEL_OUTPUT_SDVO:
 		case INTEL_OUTPUT_HDMI:
 			is_sdvo = true;
-			if (intel_encoder->needs_tv_clock)
-				is_tv = true;
 			break;
 		}
 
@@ -5615,7 +5613,7 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
 		     dev_priv->lvds_ssc_freq == 100) ||
 		    (HAS_PCH_IBX(dev) && intel_is_dual_link_lvds(dev)))
 			factor = 25;
-	} else if (is_sdvo && is_tv)
+	} else if (intel_crtc->config.sdvo_tv_clock)
 		factor = 20;
 
 	if (ironlake_needs_fb_cb_tune(&intel_crtc->config.dpll, factor))
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 766afcf..be196ff 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -120,7 +120,6 @@ struct intel_encoder {
 	struct intel_crtc *new_crtc;
 
 	int type;
-	bool needs_tv_clock;
 	/*
 	 * Intel hw has only one MUX where encoders could be clone, hence a
 	 * simple flag is enough to compute the possible_clones mask.
@@ -223,6 +222,10 @@ struct intel_crtc_config {
 	/* Controls for the clock computation, to override various stages. */
 	bool clock_set;
 
+	/* SDVO TV has a bunch of special case. To make multifunction encoders
+	 * work correctly, we need to track this at runtime.*/
+	bool sdvo_tv_clock;
+
 	/*
 	 * crtc bandwidth limit, don't increase pipe bpp or clock if not really
 	 * required. This is set in the 2nd loop of calling encoder's
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index f6bf9fc..3a1d710 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1092,6 +1092,7 @@ static bool intel_sdvo_compute_config(struct intel_encoder *encoder,
 		(void) intel_sdvo_get_preferred_input_mode(intel_sdvo,
 							   mode,
 							   adjusted_mode);
+		pipe_config->sdvo_tv_clock = true;
 	} else if (intel_sdvo->is_lvds) {
 		if (!intel_sdvo_set_output_timings_from_mode(intel_sdvo,
 							     intel_sdvo->sdvo_lvds_fixed_mode))
@@ -1655,12 +1656,9 @@ intel_sdvo_detect(struct drm_connector *connector, bool force)
 	if (ret == connector_status_connected) {
 		intel_sdvo->is_tv = false;
 		intel_sdvo->is_lvds = false;
-		intel_sdvo->base.needs_tv_clock = false;
 
-		if (response & SDVO_TV_MASK) {
+		if (response & SDVO_TV_MASK)
 			intel_sdvo->is_tv = true;
-			intel_sdvo->base.needs_tv_clock = true;
-		}
 		if (response & SDVO_LVDS_MASK)
 			intel_sdvo->is_lvds = intel_sdvo->sdvo_lvds_fixed_mode != NULL;
 	}
@@ -2357,7 +2355,6 @@ intel_sdvo_tv_init(struct intel_sdvo *intel_sdvo, int type)
 	intel_sdvo_connector->output_flag = type;
 
 	intel_sdvo->is_tv = true;
-	intel_sdvo->base.needs_tv_clock = true;
 
 	intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
 
@@ -2445,7 +2442,6 @@ static bool
 intel_sdvo_output_setup(struct intel_sdvo *intel_sdvo, uint16_t flags)
 {
 	intel_sdvo->is_tv = false;
-	intel_sdvo->base.needs_tv_clock = false;
 	intel_sdvo->is_lvds = false;
 
 	/* SDVO requires XXX1 function may not exist unless it has XXX0 function.*/
-- 
1.7.11.7




More information about the Intel-gfx mailing list