[Intel-gfx] sysfs: i915_cur_delayinfo is always twice as gt_cur_freq_mhz in 3.8.13.4?

[Cui, Dexuan]

Hi all, I'm using haswell with linux-3.8.13.4:
http://kernel.ubuntu.com/git?p=ubuntu/linux.git;a=commitdiff;h=d1baa1360260b5a01938674fc518109a4e5a148d
and I find the CAGF showed by i915_cur_delayinfo is always twice as gt_cur_freq_mhz, e.g., when the system is idle, I can get the below log:

----------------------------- Log begins
# cat /sys/kernel/debug/dri/0/i915_cur_delayinfo; echo;  cat /sys/devices/pci0000:00/0000:00:02.0/drm/card0/gt_cur_freq_mhz; echo ;
GT_PERF_STATUS: 0x00000800
RPSTAT1: 0x00040400
Render p-state ratio: 8
Render p-state VID: 0
Render p-state limit: 255
CAGF: 400MHz
RP CUR UP EI: 55890us
RP CUR UP: 276us
RP PREV UP: 0us
RP CUR DOWN EI: 94295us
RP CUR DOWN: 389us
RP PREV DOWN: 0us
Lowest (RPN) frequency: 200MHz
Nominal (RP1) frequency: 400MHz
Max non-overclocked (RP0) frequency: 1200MHz

200
----------------------------- Log ends. 

But with the latest 3.10.0, both values are 200, as expected.

I guess there is a fix in 3.10.0 I can pick for my 3.8.13.4?

Thanks,
-- Dexuan