[Intel-gfx] [PATCH 17/17] drm/i915: Enable Lower Slice on Haswell GT3.

Rodrigo Vivi rodrigo.vivi at gmail.com
Tue Aug 27 00:51:09 CEST 2013


Full HSW GT3 power can only be achieved with all Execution Units turned on.
This patch enables all EUs present on HSW GT3 by enabling lower slice.

Credits-by: Yejun Guo <yejun.guo at intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi at gmail.com>
---
 drivers/gpu/drm/i915/i915_drv.h | 2 ++
 drivers/gpu/drm/i915/i915_gem.c | 5 +++++
 drivers/gpu/drm/i915/i915_reg.h | 5 +++++
 3 files changed, 12 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 7ac5ca5..e9b2f86 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1592,6 +1592,8 @@ struct drm_i915_file_private {
 				 ((dev)->pci_device & 0xFF00) == 0x0C00)
 #define IS_ULT(dev)		(IS_HASWELL(dev) && \
 				 ((dev)->pci_device & 0xFF00) == 0x0A00)
+#define IS_HSW_GT3(dev)		(IS_HASWELL(dev) && \
+				 ((dev)->pci_device & 0x00F0) == 0x0020)
 
 /*
  * The genX designation typically refers to the render engine, so render
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 50a70ee..1c72229 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -4316,6 +4316,11 @@ i915_gem_init_hw(struct drm_device *dev)
 	if (dev_priv->ellc_size)
 		I915_WRITE(HSW_IDICR, I915_READ(HSW_IDICR) | IDIHASHMSK(0xf));
 
+	if (IS_HSW_GT3(dev))
+		I915_WRITE(MI_PREDICATE_RESULT_2, LOWER_SLICE_ENABLED);
+	else
+		I915_WRITE(MI_PREDICATE_RESULT_2, LOWER_SLICE_DISABLED);
+
 	if (HAS_PCH_NOP(dev)) {
 		u32 temp = I915_READ(GEN7_MSG_CTL);
 		temp &= ~(WAIT_FOR_PCH_FLR_ACK | WAIT_FOR_PCH_RESET_ACK);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 4c3cf22..e122b57 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -263,6 +263,11 @@
 #define  MI_SEMAPHORE_SYNC_VVE	    (1<<16) /* VECS wait for VCS  (VEVSYNC) */
 #define  MI_SEMAPHORE_SYNC_RVE	    (2<<16) /* VECS wait for RCS  (VERSYNC) */
 #define  MI_SEMAPHORE_SYNC_INVALID  (3<<16)
+
+#define MI_PREDICATE_RESULT_2	(0x2214)
+#define  LOWER_SLICE_ENABLED	(1<<0)
+#define  LOWER_SLICE_DISABLED	(0<<0)
+
 /*
  * 3D instructions used by the kernel
  */
-- 
1.8.1.4




More information about the Intel-gfx mailing list