[Intel-gfx] [PATCH igt 2/2] Update dpio read/write to take in extra PHY parameter.
Chon Ming Lee
chon.ming.lee at intel.com
Wed Dec 4 13:44:33 CET 2013
The extra parameter is for future platform.
Signed-off-by: Chon Ming Lee <chon.ming.lee at intel.com>
---
lib/intel_dpio.c | 19 +++++++++++++++----
lib/intel_gpu_tools.h | 4 ++--
tools/intel_dpio_read.c | 2 +-
tools/intel_dpio_write.c | 2 +-
tools/quick_dump/chipset.i | 4 ++--
tools/quick_dump/quick_dump.py | 2 +-
tools/quick_dump/reg_access.py | 6 ++++--
7 files changed, 26 insertions(+), 13 deletions(-)
diff --git a/lib/intel_dpio.c b/lib/intel_dpio.c
index acfd201..7e22095 100644
--- a/lib/intel_dpio.c
+++ b/lib/intel_dpio.c
@@ -50,12 +50,23 @@ static void intel_display_reg_write(uint32_t reg, uint32_t val)
*ptr = val;
}
+static int get_dpio_port(int phy) {
+
+ struct pci_device *dev = intel_get_pci_device();
+ int dpio_port;
+
+ if (IS_VALLEYVIEW(dev->device_id))
+ dpio_port = DPIO_PORTID;
+
+ return dpio_port;
+}
+
/*
* In SoCs like Valleyview some of the PLL & Lane control registers
* can be accessed only through IO side band fabric called DPIO
*/
uint32_t
-intel_dpio_reg_read(uint32_t reg)
+intel_dpio_reg_read(uint32_t reg, int phy)
{
/* Check whether the side band fabric is ready to accept commands */
do {
@@ -64,7 +75,7 @@ intel_dpio_reg_read(uint32_t reg)
intel_display_reg_write(DPIO_REG, reg);
intel_display_reg_write(DPIO_PKT, DPIO_RID |
- DPIO_OP_READ | DPIO_PORTID | DPIO_BYTE);
+ DPIO_OP_READ | get_dpio_port(phy) | DPIO_BYTE);
do {
usleep(1);
} while (intel_display_reg_read(DPIO_PKT) & DPIO_BUSY);
@@ -77,7 +88,7 @@ intel_dpio_reg_read(uint32_t reg)
* can be accessed only through IO side band fabric called DPIO
*/
void
-intel_dpio_reg_write(uint32_t reg, uint32_t val)
+intel_dpio_reg_write(uint32_t reg, uint32_t val, int phy)
{
/* Check whether the side band fabric is ready to accept commands */
do {
@@ -87,7 +98,7 @@ intel_dpio_reg_write(uint32_t reg, uint32_t val)
intel_display_reg_write(DPIO_DATA, val);
intel_display_reg_write(DPIO_REG, reg);
intel_display_reg_write(DPIO_PKT, DPIO_RID |
- DPIO_OP_WRITE | DPIO_PORTID | DPIO_BYTE);
+ DPIO_OP_WRITE | get_dpio_port(phy) | DPIO_BYTE);
do {
usleep(1);
} while (intel_display_reg_read(DPIO_PKT) & DPIO_BUSY);
diff --git a/lib/intel_gpu_tools.h b/lib/intel_gpu_tools.h
index 412e465..b242243 100644
--- a/lib/intel_gpu_tools.h
+++ b/lib/intel_gpu_tools.h
@@ -48,8 +48,8 @@ void intel_register_write(uint32_t reg, uint32_t val);
int intel_register_access_needs_fakewake(void);
/* Following functions are relevant only for SoCs like Valleyview */
-uint32_t intel_dpio_reg_read(uint32_t reg);
-void intel_dpio_reg_write(uint32_t reg, uint32_t val);
+uint32_t intel_dpio_reg_read(uint32_t reg, int phy);
+void intel_dpio_reg_write(uint32_t reg, uint32_t val, int phy);
int intel_punit_read(uint8_t addr, uint32_t *val);
int intel_punit_write(uint8_t addr, uint32_t val);
diff --git a/tools/intel_dpio_read.c b/tools/intel_dpio_read.c
index c0c904a..6202ad9 100644
--- a/tools/intel_dpio_read.c
+++ b/tools/intel_dpio_read.c
@@ -56,7 +56,7 @@ int main(int argc, char** argv)
intel_register_access_init(dev, 0);
- val = intel_dpio_reg_read(reg);
+ val = intel_dpio_reg_read(reg, 0);
printf("Read DPIO register: 0x%x - Value : 0x%x\n", reg, val);
diff --git a/tools/intel_dpio_write.c b/tools/intel_dpio_write.c
index f842999..3d2f297 100644
--- a/tools/intel_dpio_write.c
+++ b/tools/intel_dpio_write.c
@@ -57,7 +57,7 @@ int main(int argc, char** argv)
intel_register_access_init(dev, 0);
- intel_dpio_reg_write(reg, val);
+ intel_dpio_reg_write(reg, val, 0);
intel_register_access_fini();
diff --git a/tools/quick_dump/chipset.i b/tools/quick_dump/chipset.i
index f1cc368..c5f4b56 100644
--- a/tools/quick_dump/chipset.i
+++ b/tools/quick_dump/chipset.i
@@ -16,7 +16,7 @@ extern uint32_t intel_register_write(uint32_t reg, uint32_t val);
extern void intel_register_access_fini();
extern int intel_register_access_needs_fakewake();
extern unsigned short pcidev_to_devid(struct pci_device *pci_dev);
-extern uint32_t intel_dpio_reg_read(uint32_t reg);
+extern uint32_t intel_dpio_reg_read(uint32_t reg, int phy);
%}
extern int is_sandybridge(unsigned short pciid);
@@ -30,4 +30,4 @@ extern uint32_t intel_register_write(uint32_t reg, uint32_t val);
extern void intel_register_access_fini();
extern int intel_register_access_needs_fakewake();
extern unsigned short pcidev_to_devid(struct pci_device *pci_dev);
-extern uint32_t intel_dpio_reg_read(uint32_t reg);
+extern uint32_t intel_dpio_reg_read(uint32_t reg, int phy);
diff --git a/tools/quick_dump/quick_dump.py b/tools/quick_dump/quick_dump.py
index ff151d1..77744d4 100644
--- a/tools/quick_dump/quick_dump.py
+++ b/tools/quick_dump/quick_dump.py
@@ -21,7 +21,7 @@ def parse_file(file):
for line in file:
register = ast.literal_eval(line)
if register[2] == 'DPIO':
- val = reg.dpio_read(register[1])
+ val = reg.dpio_read(register[1], 0)
else:
val = reg.read(register[1])
intreg = int(register[1], 16)
diff --git a/tools/quick_dump/reg_access.py b/tools/quick_dump/reg_access.py
index 113a3cf..cf6e0a4 100755
--- a/tools/quick_dump/reg_access.py
+++ b/tools/quick_dump/reg_access.py
@@ -27,9 +27,11 @@ def get_wake():
mt_forcewake_get()
vlv_forcewake_get()
-def dpio_read(reg):
+def dpio_read(reg, phy):
reg = int(reg, 16)
- val = chipset.intel_dpio_reg_read(reg)
+ phy = int(phy)
+
+ val = chipset.intel_dpio_reg_read(reg, phy)
return val
--
1.8.3.1
More information about the Intel-gfx
mailing list