[Intel-gfx] [PATCH v3.12 1/3] i915/vlv: untangle integrated clock source handling v4

[ville.syrjala at linux.intel.com]

From: Jesse Barnes <jbarnes at virtuousgeek.org>

commit f60711666bcab6df2c6c91d851e07ed54088453c upstream.

The global integrated clock source bit resides in DPLL B on VLV, but we
were treating it as a per-pipe resource.  It needs to be set whenever
any PLL is active, so pull setting the bit out of vlv_update_pll and
into vlv_enable_pll.  Also add a vlv_disable_pll to prevent disabling it
when pipe B shuts down.

I'm guessing on the references here, I expect this to bite any config
where multiple displays are active or displays are moved from pipe to
pipe.

v2: re-add bits in vlv_update_pll to keep from confusing the state checker
v3: use enum pipe checks (Daniel)
    set CRI clock source early (Ville)
    consistently set CRI clock source everywhere (Ville)
v4: drop unnecessary setting of bit in vlv enable pll (Ville)

References: https://bugs.freedesktop.org/show_bug.cgi?id=67245
References: https://bugs.freedesktop.org/show_bug.cgi?id=69693
Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
[danvet: s/1/PIPE_B/]
Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>

Conflicts:
	drivers/gpu/drm/i915/intel_display.c
---
 drivers/gpu/drm/i915/intel_display.c | 30 +++++++++++++++++++++++++++---
 1 file changed, 27 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 333aa1b..c97221a 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1429,6 +1429,20 @@ static void i9xx_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
 	POSTING_READ(DPLL(pipe));
 }
 
+static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
+{
+	u32 val = 0;
+
+	/* Make sure the pipe isn't still relying on us */
+	assert_pipe_disabled(dev_priv, pipe);
+
+	/* Leave integrated clock source enabled */
+	if (pipe == PIPE_B)
+		val = DPLL_INTEGRATED_CRI_CLK_VLV;
+	I915_WRITE(DPLL(pipe), val);
+	POSTING_READ(DPLL(pipe));
+}
+
 void vlv_wait_port_ready(struct drm_i915_private *dev_priv, int port)
 {
 	u32 port_mask;
@@ -3824,7 +3838,10 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
 		if (encoder->post_disable)
 			encoder->post_disable(encoder);
 
-	i9xx_disable_pll(dev_priv, pipe);
+	if (IS_VALLEYVIEW(dev))
+		vlv_disable_pll(dev_priv, pipe);
+	else
+		i9xx_disable_pll(dev_priv, pipe);
 
 	intel_crtc->active = false;
 	intel_update_fbc(dev);
@@ -4553,9 +4570,9 @@ static void vlv_update_pll(struct intel_crtc *crtc)
 	/* Enable DPIO clock input */
 	dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV |
 		DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV;
-	if (pipe)
+	/* We should never disable this, set it here for state tracking */
+	if (pipe == PIPE_B)
 		dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
-
 	dpll |= DPLL_VCO_ENABLE;
 	crtc->config.dpll_hw_state.dpll = dpll;
 
@@ -10088,12 +10105,19 @@ static void i915_disable_vga(struct drm_device *dev)
 
 void intel_modeset_init_hw(struct drm_device *dev)
 {
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
 	intel_init_power_well(dev);
 
 	intel_prepare_ddi(dev);
 
 	intel_init_clock_gating(dev);
 
+	/* Enable the CRI clock source so we can get at the display */
+	if (IS_VALLEYVIEW(dev))
+		I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
+			   DPLL_INTEGRATED_CRI_CLK_VLV);
+
 	mutex_lock(&dev->struct_mutex);
 	intel_enable_gt_powersave(dev);
 	mutex_unlock(&dev->struct_mutex);
-- 
1.8.3.2