[Intel-gfx] [PATCH 2/5] drm/i915: Parse EDID probed modes for DRRS support
Vandana Kannan
vandana.kannan at intel.com
Fri Dec 20 06:21:53 CET 2013
On Dec-19-2013 5:21 PM, Jani Nikula wrote:
> On Tue, 17 Dec 2013, Vandana Kannan <vandana.kannan at intel.com> wrote:
>> From: Pradeep Bhat <pradeep.bhat at intel.com>
>>
>> This patch and finds out the lowest refresh rate supported for the resolution
>> same as the fixed_mode, based on the implementaion find_panel_downclock.
>> It also checks the VBT fields to see if panel supports seamless DRRS or not.
>> Based on above data it marks whether eDP panel supports seamless DRRS or not.
>> This information is needed for supporting seamless DRRS switch for
>> certain power saving usecases. This patch is tested by enabling the DRM logs
>> and user should see whether Seamless DRRS is supported or not.
>>
>> Signed-off-by: Pradeep Bhat <pradeep.bhat at intel.com>
>> Signed-off-by: Vandana Kannan <vandana.kannan at intel.com>
>> ---
>> drivers/gpu/drm/i915/i915_drv.h | 2 ++
>> drivers/gpu/drm/i915/intel_dp.c | 47 ++++++++++++++++++++++++++++++++++++++
>> drivers/gpu/drm/i915/intel_drv.h | 29 +++++++++++++++++++++++
>> 3 files changed, 78 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
>> index 02e11dc..c9bca16 100644
>> --- a/drivers/gpu/drm/i915/i915_drv.h
>> +++ b/drivers/gpu/drm/i915/i915_drv.h
>> @@ -1462,8 +1462,10 @@ typedef struct drm_i915_private {
>> /* Reclocking support */
>> bool render_reclock_avail;
>> bool lvds_downclock_avail;
>> + bool edp_downclock_avail;
>> /* indicates the reduced downclock for LVDS*/
>> int lvds_downclock;
>> + int edp_downclock;
>> u16 orig_clock;
>>
>> bool mchbar_need_disable;
>> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
>> index 82de200..935b46e 100644
>> --- a/drivers/gpu/drm/i915/intel_dp.c
>> +++ b/drivers/gpu/drm/i915/intel_dp.c
>> @@ -3524,6 +3524,48 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
>> I915_READ(pp_div_reg));
>> }
>>
>> +static void
>> +intel_dp_drrs_initialize(struct intel_digital_port *intel_dig_port,
>> + struct intel_connector *intel_connector,
>> + struct drm_display_mode *fixed_mode)
>> +{
>> + struct drm_connector *connector = &intel_connector->base;
>> + struct intel_dp *intel_dp = &intel_dig_port->dp;
>> + struct drm_device *dev = intel_dig_port->base.base.dev;
>> + struct drm_i915_private *dev_priv = dev->dev_private;
>> +
>> + /**
>> + * Check if PSR is supported by panel and enabled
>> + * if so then DRRS is reported as not supported for Haswell.
>> + */
>> + if (INTEL_INFO(dev)->gen < 8 && intel_edp_is_psr_enabled(dev)) {
>> + DRM_INFO("eDP panel has PSR enabled. Cannot support DRRS\n");
>> + return;
>> + }
>> +
>> + /* First check if DRRS is enabled from VBT struct */
>> + if (!dev_priv->vbt.intel_drrs_enabled) {
>> + DRM_INFO("VBT doesn't support DRRS\n");
>> + return;
>> + }
>> +
>> + intel_connector->panel.downclock_mode = intel_find_panel_downclock(dev,
>> + fixed_mode, connector);
>> +
>> + if (intel_connector->panel.downclock_mode != NULL &&
>> + dev_priv->vbt.drrs_mode == SEAMLESS_DRRS_SUPPORT) {
>> + dev_priv->edp_downclock_avail = true;
>> + dev_priv->edp_downclock =
>> + intel_connector->panel.downclock_mode->clock;
>> +
>> + intel_dp->drrs_state.is_drrs_supported
>> + = dev_priv->vbt.drrs_mode;
>> +
>> + intel_dp->drrs_state.drrs_refresh_rate_type = DRRS_HIGH_RR;
>> + DRM_INFO("SEAMLESS DRRS supported for eDP panel.\n");
>> + }
>> +}
>> +
>> static bool intel_edp_init_connector(struct intel_dp *intel_dp,
>> struct intel_connector *intel_connector)
>> {
>> @@ -3537,6 +3579,8 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
>> struct drm_display_mode *scan;
>> struct edid *edid;
>>
>> + intel_dp->drrs_state.is_drrs_supported = DRRS_NOT_SUPPORTED;
>> +
>> if (!is_edp(intel_dp))
>> return true;
>>
>> @@ -3581,6 +3625,9 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
>> list_for_each_entry(scan, &connector->probed_modes, head) {
>> if ((scan->type & DRM_MODE_TYPE_PREFERRED)) {
>> fixed_mode = drm_mode_duplicate(dev, scan);
>> + if (INTEL_INFO(dev)->gen >= 5)
>> + intel_dp_drrs_initialize(intel_dig_port,
>> + intel_connector, fixed_mode);
>> break;
>> }
>> }
>> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
>> index 9f8b465..6ec5f4e 100644
>> --- a/drivers/gpu/drm/i915/intel_drv.h
>> +++ b/drivers/gpu/drm/i915/intel_drv.h
>> @@ -462,6 +462,34 @@ struct intel_hdmi {
>>
>> #define DP_MAX_DOWNSTREAM_PORTS 0x10
>>
>> +/**
>> + * This enum is used to indicate the DRRS support type.
>> + * The values of the enum map 1-to-1 with the values from VBT.
>> + */
>> +enum edp_panel_type {
>
> This is about DRRS, not some fundamental "eDP panel type". The comment
> above explains what this is, but why not make the enum self explanatory,
> for example panel_drrs_support or something.
I will change this to drrs_support_type
>
> As to the 1-to-1 map mention, the vbt data is unsigned, but not
> supported is -1 below...
>
>> + DRRS_NOT_SUPPORTED = -1,
>> + STATIC_DRRS_SUPPORT = 0,
>> + SEAMLESS_DRRS_SUPPORT = 2
>> +};
VBT would return 0 for static DRRS and 2 for seamless DRRS.
DRRS_NOT_SUPPORTED is for internal usage - not 1:1 mapped with VBT.
>> +/**
>> + * HIGH_RR is the highest eDP panel refresh rate read from EDID
>> + * LOW_RR is the lowest eDP panel refresh rate found from EDID
>> + * parsing for same resolution.
>> + */
>> +enum edp_drrs_refresh_rate_type {
>> + DRRS_HIGH_RR,
>> + DRRS_LOW_RR,
>> + DRRS_MAX_RR, /* RR count */
>> +};
>> +/**
>> + * The drrs_info struct will represent the DRRS feature for eDP
>> + * panel.
>> + */
>> +struct drrs_info {
>> + int is_drrs_supported;
>
> IMHO anything that begins with "is" should be strictly boolean. When you
> make this an enum per Chris' request, please change this as well. For
> exampel drrs_support or something.
>
I will change is_drrs_supported to enum type and change the name.
>> + int drrs_refresh_rate_type;
>> +};
>> +
>> struct intel_dp {
>> uint32_t output_reg;
>> uint32_t aux_ch_ctl_reg;
>> @@ -487,6 +515,7 @@ struct intel_dp {
>> bool want_panel_vdd;
>> bool psr_setup_done;
>> struct intel_connector *attached_connector;
>> + struct drrs_info drrs_state;
>> };
>>
>> struct intel_digital_port {
>> --
>> 1.7.9.5
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
More information about the Intel-gfx
mailing list