[Intel-gfx] [PATCH V2 3/3] i915: ignore lid open event when resuming
Daniel Vetter
daniel at ffwll.ch
Mon Feb 4 16:25:00 CET 2013
On Mon, Feb 04, 2013 at 03:10:11PM +0800, Zhang Rui wrote:
> i915 driver needs to do modeset when
> 1. system resumes from sleep
> 2. lid is opened
>
> In PM_SUSPEND_MEM state, all the GPEs are cleared when system resumes,
> thus it is the i915_resume code does the modeset rather than intel_lid_notify().
>
> But in PM_SUSPEND_FREEZE state, this will be broken because
> system is still responsive to the lid events.
> 1. When we close the lid in Freeze state, intel_lid_notify() sets modeset_on_lid.
> 2. When we reopen the lid, intel_lid_notify() will do a modeset,
> before the system is resumed.
> here is the error log,
>
> [92146.548074] WARNING: at drivers/gpu/drm/i915/intel_display.c:1028 intel_wait_for_pipe_off+0x184/0x190 [i915]()
> [92146.548076] Hardware name: VGN-Z540N
> [92146.548078] pipe_off wait timed out
> [92146.548167] Modules linked in: hid_generic usbhid hid snd_hda_codec_realtek snd_hda_intel snd_hda_codec parport_pc snd_hwdep ppdev snd_pcm_oss i915 snd_mixer_oss snd_pcm arc4 iwldvm snd_seq_dummy mac80211 snd_seq_oss snd_seq_midi fbcon tileblit font bitblit softcursor drm_kms_helper snd_rawmidi snd_seq_midi_event coretemp drm snd_seq kvm btusb bluetooth snd_timer iwlwifi pcmcia tpm_infineon i2c_algo_bit joydev snd_seq_device intel_agp cfg80211 snd intel_gtt yenta_socket pcmcia_rsrc sony_laptop agpgart microcode psmouse tpm_tis serio_raw mxm_wmi soundcore snd_page_alloc tpm acpi_cpufreq lpc_ich pcmcia_core tpm_bios mperf processor lp parport firewire_ohci firewire_core crc_itu_t sdhci_pci sdhci thermal e1000e
> [92146.548173] Pid: 4304, comm: kworker/0:0 Tainted: G W 3.8.0-rc3-s0i3-v3-test+ #9
> [92146.548175] Call Trace:
> [92146.548189] [<c10378e2>] warn_slowpath_common+0x72/0xa0
> [92146.548227] [<f86398b4>] ? intel_wait_for_pipe_off+0x184/0x190 [i915]
> [92146.548263] [<f86398b4>] ? intel_wait_for_pipe_off+0x184/0x190 [i915]
> [92146.548270] [<c10379b3>] warn_slowpath_fmt+0x33/0x40
> [92146.548307] [<f86398b4>] intel_wait_for_pipe_off+0x184/0x190 [i915]
> [92146.548344] [<f86399c2>] intel_disable_pipe+0x102/0x190 [i915]
> [92146.548380] [<f8639ea4>] ? intel_disable_plane+0x64/0x80 [i915]
> [92146.548417] [<f8639f7c>] i9xx_crtc_disable+0xbc/0x150 [i915]
> [92146.548456] [<f863ebee>] intel_crtc_update_dpms+0x5e/0x90 [i915]
> [92146.548493] [<f86437cf>] intel_modeset_setup_hw_state+0x42f/0x8f0 [i915]
> [92146.548535] [<f8645b0b>] intel_lid_notify+0x9b/0xc0 [i915]
> [92146.548543] [<c15610d3>] notifier_call_chain+0x43/0x60
> [92146.548550] [<c105d1e1>] __blocking_notifier_call_chain+0x41/0x80
> [92146.548556] [<c105d23f>] blocking_notifier_call_chain+0x1f/0x30
> [92146.548563] [<c131a684>] acpi_lid_send_state+0x78/0xa4
> [92146.548569] [<c131aa9e>] acpi_button_notify+0x3b/0xf1
> [92146.548577] [<c12df56a>] ? acpi_os_execute+0x17/0x19
> [92146.548582] [<c12e591a>] ? acpi_ec_sync_query+0xa5/0xbc
> [92146.548589] [<c12e2b82>] acpi_device_notify+0x16/0x18
> [92146.548595] [<c12f4904>] acpi_ev_notify_dispatch+0x38/0x4f
> [92146.548600] [<c12df0e8>] acpi_os_execute_deferred+0x20/0x2b
> [92146.548607] [<c1051208>] process_one_work+0x128/0x3f0
> [92146.548613] [<c1564f73>] ? common_interrupt+0x33/0x38
> [92146.548618] [<c104f8c0>] ? wake_up_worker+0x30/0x30
> [92146.548624] [<c12df0c8>] ? acpi_os_wait_events_complete+0x1e/0x1e
> [92146.548629] [<c10524f9>] worker_thread+0x119/0x3b0
> [92146.548634] [<c10523e0>] ? manage_workers+0x240/0x240
> [92146.548640] [<c1056e84>] kthread+0x94/0xa0
> [92146.548647] [<c1060000>] ? ftrace_raw_output_sched_stat_runtime+0x70/0xf0
> [92146.548652] [<c15649b7>] ret_from_kernel_thread+0x1b/0x28
> [92146.548658] [<c1056df0>] ? kthread_create_on_node+0xc0/0xc0
>
> three different modeset flags are introduced in this patch
> MODESET_ON_LID: do modeset on next lid open event
> MODESET_DONE: modeset already done
> MODESET_ON_RESUME: do modeset when system is resumed
>
> In this way,
> 1. when lid is closed, MODESET_ON_LID is set so that
> we'll do modeset on next lid open event.
> 2. when lid is opened, MODESET_DONE is set
> so that duplicate lid open events will be ignored.
> 3. when system suspends, MODESET_ON_RESUME is set.
> In this case, we will not do modeset on any lid events.
>
> Plus, locking mechanism is also introduced to avoid racing.
>
> Signed-off-by: Zhang Rui <rui.zhang at intel.com>
Looks nice, two tiny bikesheds below.
> ---
> drivers/gpu/drm/i915/i915_dma.c | 1 +
> drivers/gpu/drm/i915/i915_drv.c | 14 +++++++++-----
> drivers/gpu/drm/i915/i915_drv.h | 11 +++++++++--
> drivers/gpu/drm/i915/intel_lvds.c | 33 ++++++++++++++++++++-------------
> 4 files changed, 39 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
> index 99daa89..c7cb546 100644
> --- a/drivers/gpu/drm/i915/i915_dma.c
> +++ b/drivers/gpu/drm/i915/i915_dma.c
> @@ -1585,6 +1585,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
> spin_lock_init(&dev_priv->dpio_lock);
>
> mutex_init(&dev_priv->rps.hw_lock);
> + mutex_init(&dev_priv->modeset_lock);
>
> if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev))
> dev_priv->num_pipe = 3;
> diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
> index 1172658..bd7ab5b 100644
> --- a/drivers/gpu/drm/i915/i915_drv.c
> +++ b/drivers/gpu/drm/i915/i915_drv.c
> @@ -468,6 +468,12 @@ static int i915_drm_freeze(struct drm_device *dev)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
>
> + /* ignore lid events during suspend */
> + mutex_lock(&dev_priv->modeset_lock);
> + dev_priv->modeset = MODESET_ON_RESUME;
I think calling this MODESET_SUSPENDED would make it clearer that we
have disable the modeset (and so lid restore) handling.
> + mutex_unlock(&dev_priv->modeset_lock);
> +
> +
> drm_kms_helper_poll_disable(dev);
>
> pci_save_state(dev->pdev);
> @@ -492,9 +498,6 @@ static int i915_drm_freeze(struct drm_device *dev)
>
> intel_opregion_fini(dev);
>
> - /* Modeset on resume, not lid events */
> - dev_priv->modeset_on_lid = 0;
> -
> console_lock();
> intel_fbdev_set_suspend(dev, 1);
> console_unlock();
> @@ -569,8 +572,6 @@ static int __i915_drm_thaw(struct drm_device *dev)
>
> intel_opregion_init(dev);
>
> - dev_priv->modeset_on_lid = 0;
> -
> /*
> * The console lock can be pretty contented on resume due
> * to all the printk activity. Try to keep it out of the hot
> @@ -583,6 +584,9 @@ static int __i915_drm_thaw(struct drm_device *dev)
> schedule_work(&dev_priv->console_resume_work);
> }
>
> + mutex_lock(&dev_priv->modeset_lock);
> + dev_priv->modeset = MODESET_DONE;
> + mutex_unlock(&dev_priv->modeset_lock);
> return error;
> }
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 12ab3bd..1a57ae8 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -620,6 +620,12 @@ struct intel_l3_parity {
> struct work_struct error_work;
> };
>
> +enum modeset_flag {
> + MODESET_ON_LID_OPEN,
> + MODESET_DONE,
> + MODESET_ON_RESUME,
> +};
> +
> typedef struct drm_i915_private {
> struct drm_device *dev;
>
> @@ -750,9 +756,10 @@ typedef struct drm_i915_private {
>
> unsigned long quirks;
>
> - /* Register state */
> - bool modeset_on_lid;
> + enum modeset_flag modeset;
> + struct mutex modeset_lock;
Using modeset/modeset_lock is imo a bit too generic, since this is all
about restoring the modeset configuration on lid open. What about
- bool modeset_on_lid;
+ enum modeset_restore modeset_restore;
+ struct mutex modeset_restore_lock;
instead?
Yours, Daniel
>
> + /* Register state */
> struct {
> /** Bridge to intel-gtt-ko */
> struct intel_gtt *gtt;
> diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> index 17aee74..4eb966a 100644
> --- a/drivers/gpu/drm/i915/intel_lvds.c
> +++ b/drivers/gpu/drm/i915/intel_lvds.c
> @@ -492,13 +492,14 @@ static const struct dmi_system_id intel_no_modeset_on_lid[] = {
> };
>
> /*
> - * Lid events. Note the use of 'modeset_on_lid':
> - * - we set it on lid close, and reset it on open
> + * Lid events. Note the use of 'modeset':
> + * - we set it to MODESET_ON_LID on lid close,
> + * and set it to MODESET_DONE on open
> * - we use it as a "only once" bit (ie we ignore
> - * duplicate events where it was already properly
> - * set/reset)
> - * - the suspend/resume paths will also set it to
> - * zero, since they restore the mode ("lid open").
> + * duplicate events where it was already properly set)
> + * - the suspend/resume paths will set it to
> + * MODESET_ON_RESUME and ignore the lid open event,
> + * because they restore the mode ("lid open").
> */
> static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
> void *unused)
> @@ -512,6 +513,9 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
> if (dev->switch_power_state != DRM_SWITCH_POWER_ON)
> return NOTIFY_OK;
>
> + mutex_lock(&dev_priv->modeset_lock);
> + if (dev_priv->modeset == MODESET_ON_RESUME)
> + goto exit;
> /*
> * check and update the status of LVDS connector after receiving
> * the LID nofication event.
> @@ -520,21 +524,24 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
>
> /* Don't force modeset on machines where it causes a GPU lockup */
> if (dmi_check_system(intel_no_modeset_on_lid))
> - return NOTIFY_OK;
> + goto exit;
> if (!acpi_lid_open()) {
> - dev_priv->modeset_on_lid = 1;
> - return NOTIFY_OK;
> + /* do modeset on next lid open event */
> + dev_priv->modeset = MODESET_ON_LID_OPEN;
> + goto exit;
> }
>
> - if (!dev_priv->modeset_on_lid)
> - return NOTIFY_OK;
> -
> - dev_priv->modeset_on_lid = 0;
> + if (dev_priv->modeset == MODESET_DONE)
> + goto exit;
>
> mutex_lock(&dev->mode_config.mutex);
> intel_modeset_setup_hw_state(dev, true);
> mutex_unlock(&dev->mode_config.mutex);
>
> + dev_priv->modeset = MODESET_DONE;
> +
> +exit:
> + mutex_unlock(&dev_priv->modeset_lock);
> return NOTIFY_OK;
> }
>
> --
> 1.7.9.5
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
More information about the Intel-gfx
mailing list