[Intel-gfx] drm-intel-nightly: [drm] Wrong MCH_SSKPD value: 0x16040307

Sedat Dilek sedat.dilek at gmail.com
Wed Feb 13 12:15:23 CET 2013


Hi,

dunno if this is a problem of i915 or drm, seen with today's next plus
drm-intel-nightly on top:

$ dmesg | egrep -i 'vga|drm|i915|fbcon|fb0:|fb1:|frame buffer'
[    0.169185] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.169192] vgaarb: loaded
[    0.169194] vgaarb: bridge control possible 0000:00:02.0
[   10.753557] [drm] Initialized drm 1.1.0 20060810
[   11.893511] [drm] Memory usable by graphics device = 2048M
[   11.893519] i915 0000:00:02.0: setting latency timer to 64
[   11.932298] i915 0000:00:02.0: irq 49 for MSI/MSI-X
[   11.932314] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   11.932316] [drm] Driver supports precise vblank timestamp query.
[   11.932388] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   11.942391] [drm] Wrong MCH_SSKPD value: 0x16040307
[   11.942395] [drm] This can cause pipe underruns and display issues.
[   11.942396] [drm] Please upgrade your BIOS to fix this.
[   11.958989] fbcon: inteldrmfb (fb0) is primary device
[   13.004539] Console: switching to colour frame buffer device 170x48
[   13.007758] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   13.007760] i915 0000:00:02.0: registered panic notifier
[   13.009289] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   13.812079] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[  124.988792] i915 0000:00:02.0: setting latency timer to 64
[  124.994748] [drm] Wrong MCH_SSKPD value: 0x16040307
[  124.994749] [drm] This can cause pipe underruns and display issues.
[  124.994749] [drm] Please upgrade your BIOS to fix this.
[  126.654709] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off

Please, have also a look at the attached files!

Regards,
- Sedat -
-------------- next part --------------
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.0-rc7-next20130213-2-iniza-small (sedat.dilek at gmail.com@fambox) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Wed Feb 13 11:09:27 CET 2013
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-rc7-next20130213-2-iniza-small root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 12XK 01/18/2013
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FE0000000 write-back
[    0.000000]   3 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0DB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask FE0000000 write-back
[    0.000000]   6 base 11FE00000 mask FFFE00000 uncachable
[    0.000000]   7 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0]
[    0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD)
[    0.000000] ACPI: XSDT 00000000daffe170 0008C (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
[    0.000000] ACPI: FACP 00000000dafef000 0010C (v05 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: DSDT 00000000daff2000 083AC (v02 SECCSD  SNB-CPT 00000000 INTL 20061109)
[    0.000000] ACPI: FACS 00000000daf47000 00040
[    0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
[    0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: APIC 00000000dafed000 00098 (v03 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01  PmRef  Cpu0Ist 00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 00000000dafea000 00996 (v01  PmRef    CpuPm 00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL      COMBUF 00000001 PTL  00000001)
[    0.000000] ACPI: UEFI 00000000dafe7000 0026A (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 00000000dafe6000 000D0 (v01   Iffs  IffsAsl 00003000 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01f8b000, 0x01f8bfff] PGTABLE
[    0.000000] BRK [0x01f8c000, 0x01f8cfff] PGTABLE
[    0.000000] BRK [0x01f8d000, 0x01f8dfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11fc00000-0x11fdfffff]
[    0.000000]  [mem 0x11fc00000-0x11fdfffff] page 2M
[    0.000000] BRK [0x01f8e000, 0x01f8efff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11c000000-0x11fbfffff]
[    0.000000]  [mem 0x11c000000-0x11fbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[    0.000000]  [mem 0x100000000-0x11bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40200000-0xd9c9efff]
[    0.000000]  [mem 0x40200000-0xd9bfffff] page 2M
[    0.000000]  [mem 0xd9c00000-0xd9c9efff] page 4k
[    0.000000] BRK [0x01f8f000, 0x01f8ffff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff]
[    0.000000]  [mem 0xdafff000-0xdaffffff] page 4k
[    0.000000] RAMDISK: [mem 0x379e2000-0x37ce8fff]
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff]
[    0.000000]   NODE_DATA [mem 0x11fdf8000-0x11fdfbfff]
[    0.000000]  [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b400000-ffff88011f3fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x11fdfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
[    0.000000]   node   0: [mem 0x40200000-0xd9c9efff]
[    0.000000]   node   0: [mem 0xdafff000-0xdaffffff]
[    0.000000]   node   0: [mem 0x100000000-0x11fdfffff]
[    0.000000] On node 0 totalpages: 1021485
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 141 pages reserved
[    0.000000]   DMA zone: 3981 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13859 pages used for memmap
[    0.000000]   DMA32 zone: 886944 pages, LIFO batch:31
[    0.000000]   Normal zone: 2040 pages used for memmap
[    0.000000]   Normal zone: 130560 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[    0.000000] PM: Registered nosave memory: 00000000d9c9f000 - 00000000dae7f000
[    0.000000] PM: Registered nosave memory: 00000000dae7f000 - 00000000daf9f000
[    0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000
[    0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dfa00000
[    0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
[    0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[    0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[    0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fa00000 s85568 r8192 d20928 u262144
[    0.000000] pcpu-alloc: s85568 r8192 d20928 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1005381
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-rc7-next20130213-2-iniza-small root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3933572k/4716544k available (6972k kernel code, 630604k absent, 152368k reserved, 6277k data, 1252k init)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 1596.391 MHz processor
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.78 BogoMIPS (lpj=6385564)
[    0.000009] pid_max: default: 32768 minimum: 301
[    0.000036] Security Framework initialized
[    0.000050] AppArmor: AppArmor initialized
[    0.000052] Yama: becoming mindful.
[    0.000397] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001451] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001902] Mount-cache hash table entries: 256
[    0.002087] Initializing cgroup subsys cpuacct
[    0.002092] Initializing cgroup subsys memory
[    0.002100] Initializing cgroup subsys devices
[    0.002103] Initializing cgroup subsys freezer
[    0.002106] Initializing cgroup subsys blkio
[    0.002110] Initializing cgroup subsys perf_event
[    0.002114] Initializing cgroup subsys hugetlb
[    0.002139] Disabled fast string operations
[    0.002143] CPU: Physical Processor ID: 0
[    0.002145] CPU: Processor Core ID: 0
[    0.002152] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.002152] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.002158] mce: CPU supports 7 MCE banks
[    0.002173] CPU0: Thermal monitoring enabled (TM1)
[    0.002184] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.002184] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.002184] tlb_flushall_shift: 5
[    0.002279] Freeing SMP alternatives: 24k freed
[    0.004489] ACPI: Core revision 20130117
[    0.009882] ACPI: All ACPI Tables successfully acquired
[    0.011555] ftrace: allocating 26115 entries in 103 pages
[    0.026202] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.065863] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07)
[    0.065875] TSC deadline timer enabled
[    0.065886] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[    0.065897] ... version:                3
[    0.065900] ... bit width:              48
[    0.065902] ... generic registers:      4
[    0.065904] ... value mask:             0000ffffffffffff
[    0.065907] ... max period:             000000007fffffff
[    0.065909] ... fixed-purpose events:   3
[    0.065911] ... event mask:             000000070000000f
[    0.078060] Disabled fast string operations
[    0.080270] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.091407] Disabled fast string operations
[    0.104638] Disabled fast string operations
[    0.067027] smpboot: Booting Node   0, Processors  #1 #2 #3
[    0.106755] Brought up 4 CPUs
[    0.106764] smpboot: Total of 4 processors activated (12771.12 BogoMIPS)
[    0.110557] devtmpfs: initialized
[    0.111440] EVM: security.selinux
[    0.111444] EVM: security.SMACK64
[    0.111446] EVM: security.capability
[    0.111491] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes)
[    0.112255] regulator-dummy: no parameters
[    0.112307] NET: Registered protocol family 16
[    0.112422] ACPI: bus type pci registered
[    0.112486] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.112492] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.119967] PCI: Using configuration type 1 for base access
[    0.120844] bio: create slab <bio-0> at 0
[    0.120933] ACPI: Added _OSI(Module Device)
[    0.120937] ACPI: Added _OSI(Processor Device)
[    0.120939] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.120942] ACPI: Added _OSI(Processor Aggregator Device)
[    0.122443] ACPI: EC: Look up EC in DSDT
[    0.124040] ACPI: Executed 1 blocks of module-level executable AML code
[    0.126330] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.127506] ACPI: SSDT 00000000dae70718 00688 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.127900] ACPI: Dynamic OEM Table Load:
[    0.127904] ACPI: SSDT           (null) 00688 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.128160] ACPI: SSDT 00000000dae71a98 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.128580] ACPI: Dynamic OEM Table Load:
[    0.128584] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.128688] ACPI: SSDT 00000000dae6fd98 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.129072] ACPI: Dynamic OEM Table Load:
[    0.129076] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.130589] ACPI: Interpreter enabled
[    0.130596] ACPI: (supports S0 S1ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[    0.130613]  S3 S4 S5)
[    0.130623] ACPI: Using IOAPIC for interrupt routing
[    0.130657] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.141011] ACPI: Power Resource [FN00] (off)
[    0.141087] ACPI: Power Resource [FN01] (off)
[    0.141160] ACPI: Power Resource [FN02] (off)
[    0.141231] ACPI: Power Resource [FN03] (off)
[    0.141304] ACPI: Power Resource [FN04] (off)
[    0.141887] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.141892] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.142102] \_SB_.PCI0:_OSC invalid UUID
[    0.142104] _OSC request data:1 8 1f 
[    0.142183] \_SB_.PCI0:_OSC invalid UUID
[    0.142184] _OSC request data:1 1f 1f 
[    0.142188] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.142193] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.142622] PCI host bridge to bus 0000:00
[    0.142626] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.142630] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.142634] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.142637] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.142641] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[    0.142644] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.142655] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.142751] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.142763] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.142770] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.142776] pci 0000:00:02.0: reg 20: [io  0x3000-0x303f]
[    0.142886] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.142912] pci 0000:00:16.0: reg 10: [mem 0xf0705000-0xf070500f 64bit]
[    0.142996] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.143086] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.143110] pci 0000:00:1a.0: reg 10: [mem 0xf070a000-0xf070a3ff]
[    0.143214] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.143273] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.143291] pci 0000:00:1b.0: reg 10: [mem 0xf0700000-0xf0703fff 64bit]
[    0.143365] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.143395] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.143431] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.143518] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.143548] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.143574] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.143613] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.143699] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.143733] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.143756] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.143794] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.143925] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.143967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[    0.144029] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.144054] pci 0000:00:1d.0: reg 10: [mem 0xf0709000-0xf07093ff]
[    0.144152] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.144208] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.144365] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.144386] pci 0000:00:1f.2: reg 10: [io  0x3088-0x308f]
[    0.144395] pci 0000:00:1f.2: reg 14: [io  0x3094-0x3097]
[    0.144404] pci 0000:00:1f.2: reg 18: [io  0x3080-0x3087]
[    0.144413] pci 0000:00:1f.2: reg 1c: [io  0x3090-0x3093]
[    0.144422] pci 0000:00:1f.2: reg 20: [io  0x3060-0x307f]
[    0.144432] pci 0000:00:1f.2: reg 24: [mem 0xf0708000-0xf07087ff]
[    0.144482] pci 0000:00:1f.2: PME# supported from D3hot
[    0.144544] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.144562] pci 0000:00:1f.3: reg 10: [mem 0xf0704000-0xf07040ff 64bit]
[    0.144585] pci 0000:00:1f.3: reg 20: [io  0xefa0-0xefbf]
[    0.144876] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000
[    0.145040] pci 0000:01:00.0: reg 10: [mem 0xf0600000-0xf0601fff 64bit]
[    0.145770] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.145916] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.151323] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.151332] pci 0000:00:1c.0:   bridge window [mem 0xf0600000-0xf06fffff]
[    0.151478] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.151548] pci 0000:02:00.0: reg 10: [io  0x2000-0x20ff]
[    0.151665] pci 0000:02:00.0: reg 18: [mem 0xf0404000-0xf0404fff 64bit pref]
[    0.151741] pci 0000:02:00.0: reg 20: [mem 0xf0400000-0xf0403fff 64bit pref]
[    0.152072] pci 0000:02:00.0: supports D1 D2
[    0.152074] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.152191] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.159244] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.159259] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.159282] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.159422] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.159460] pci 0000:03:00.0: reg 10: [mem 0xf0500000-0xf0507fff 64bit]
[    0.159658] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.167239] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.167258] pci 0000:00:1c.4:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.167295] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.167950] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.168011] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.168071] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.168129] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.168186] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    0.168244] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.168303] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.168360] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    0.168868] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.168877] acpi root: \_SB_.PCI0 notify handler is installed
[    0.168933] Found 1 acpi root devices
[    0.168973] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.169107] ACPI: No dock devices found.
[    0.169185] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.169192] vgaarb: loaded
[    0.169194] vgaarb: bridge control possible 0000:00:02.0
[    0.169344] SCSI subsystem initialized
[    0.169348] ACPI: bus type scsi registered
[    0.169394] libata version 3.00 loaded.
[    0.169408] ACPI: bus type usb registered
[    0.169426] usbcore: registered new interface driver usbfs
[    0.169437] usbcore: registered new interface driver hub
[    0.169461] usbcore: registered new device driver usb
[    0.169545] PCI: Using ACPI for IRQ routing
[    0.171196] PCI: pci_cache_line_size set to 64 bytes
[    0.171303] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.171306] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff]
[    0.171307] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[    0.171309] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[    0.171391] NetLabel: Initializing
[    0.171394] NetLabel:  domain hash size = 128
[    0.171396] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.171409] NetLabel:  unlabeled traffic allowed by default
[    0.171462] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.171470] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.173482] Switching to clocksource hpet
[    0.178556] AppArmor: AppArmor Filesystem Enabled
[    0.178584] pnp: PnP ACPI init
[    0.178596] ACPI: bus type pnp registered
[    0.178825] pnp 00:00: [dma 4]
[    0.178927] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.178947] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.179034] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.179065] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.179107] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.179112] system 00:04: [io  0x1000-0x100f] has been reserved
[    0.179118] system 00:04: [io  0x5000-0x5003] has been reserved
[    0.179121] system 00:04: [io  0xffff] has been reserved
[    0.179125] system 00:04: [io  0x0400-0x0453] has been reserved
[    0.179128] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.179132] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.179135] system 00:04: [io  0x0a00-0x0a0f] has been reserved
[    0.179139] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.179142] system 00:04: [io  0x5000-0x500f] could not be reserved
[    0.179147] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.179173] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.179216] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.179221] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.179251] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.179292] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[    0.179448] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.179453] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.179457] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.179461] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.179464] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.179468] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.179472] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.179475] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.179479] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    0.179483] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.179487] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.179951] pnp 00:0a: can't evaluate _CRS: 12311
[    0.179980] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.180005] pnp: PnP ACPI: found 11 devices
[    0.180008] ACPI: ACPI bus type pnp unregistered
[    0.186478] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.186487] pci 0000:00:1c.0:   bridge window [mem 0xf0600000-0xf06fffff]
[    0.186499] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.186504] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.186515] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.186524] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.186531] pci 0000:00:1c.4:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.186572] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.186574] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.186576] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.186578] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[    0.186580] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    0.186582] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff]
[    0.186584] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.186586] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.186588] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
[    0.186620] NET: Registered protocol family 2
[    0.186766] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.186920] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.187020] TCP: Hash tables configured (established 32768 bind 32768)
[    0.187051] TCP: reno registered
[    0.187061] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.187082] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.187153] NET: Registered protocol family 1
[    0.187166] pci 0000:00:02.0: Boot video device
[    0.187336] PCI: CLS 64 bytes, default 64
[    0.187373] Trying to unpack rootfs image as initramfs...
[    0.251231] Freeing initrd memory: 3100k freed
[    0.251892] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.251901] software IO TLB [mem 0xd5c9f000-0xd9c9f000] (64MB) mapped at [ffff8800d5c9f000-ffff8800d9c9efff]
[    0.252328] Initialise system trusted keyring
[    0.252374] audit: initializing netlink socket (disabled)
[    0.252392] type=2000 audit(1360754511.248:1): initialized
[    0.283105] bounce pool size: 64 pages
[    0.283118] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.284461] VFS: Disk quotas dquot_6.5.2
[    0.284502] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.284950] fuse init (API version 7.21)
[    0.285019] msgmni has been set to 7688
[    0.285460] Key type asymmetric registered
[    0.285466] Asymmetric key parser 'x509' registered
[    0.285503] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.285540] io scheduler noop registered
[    0.285545] io scheduler deadline registered (default)
[    0.285552] io scheduler cfq registered
[    0.285755] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.285769] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.285811] intel_idle: MWAIT substates: 0x21120
[    0.285812] intel_idle: v0.4 model 0x2A
[    0.285813] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.286215] ACPI: AC Adapter [ADP1] (on-line)
[    0.286282] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.286301] ACPI: Lid Switch [LID0]
[    0.286332] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.286339] ACPI: Power Button [PWRB]
[    0.286370] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.286375] ACPI: Power Button [PWRF]
[    0.286422] ACPI: Fan [FAN0] (off)
[    0.286447] ACPI: Fan [FAN1] (off)
[    0.286469] ACPI: Fan [FAN2] (off)
[    0.286493] ACPI: Fan [FAN3] (off)
[    0.286521] ACPI: Fan [FAN4] (off)
[    0.286566] ACPI: Requesting acpi_cpufreq
[    0.290640] thermal LNXTHERM:00: registered as thermal_zone0
[    0.290645] ACPI: Thermal Zone [TZ00] (67 C)
[    0.290831] thermal LNXTHERM:01: registered as thermal_zone1
[    0.290835] ACPI: Thermal Zone [TZ01] (30 C)
[    0.290864] GHES: HEST is not enabled!
[    0.290940] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.294234] Linux agpgart interface v0.103
[    0.295327] brd: module loaded
[    0.295908] loop: module loaded
[    0.295996] ahci 0000:00:1f.2: version 3.0
[    0.296068] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[    0.296111] ahci: SSS flag set, parallel bus scan disabled
[    0.296786] ACPI: Battery Slot [BAT1] (battery present)
[    0.309428] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
[    0.309435] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst 
[    0.309443] ahci 0000:00:1f.2: setting latency timer to 64
[    0.333707] scsi0 : ahci
[    0.333778] scsi1 : ahci
[    0.333837] scsi2 : ahci
[    0.333894] scsi3 : ahci
[    0.333949] scsi4 : ahci
[    0.334007] scsi5 : ahci
[    0.334044] ata1: SATA max UDMA/133 abar m2048 at 0xf0708000 port 0xf0708100 irq 40
[    0.334049] ata2: SATA max UDMA/133 abar m2048 at 0xf0708000 port 0xf0708180 irq 40
[    0.334053] ata3: DUMMY
[    0.334057] ata4: SATA max UDMA/133 abar m2048 at 0xf0708000 port 0xf0708280 irq 40
[    0.334062] ata5: SATA max UDMA/133 abar m2048 at 0xf0708000 port 0xf0708300 irq 40
[    0.334065] ata6: DUMMY
[    0.334307] libphy: Fixed MDIO Bus: probed
[    0.334377] tun: Universal TUN/TAP device driver, 1.6
[    0.334380] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[    0.334424] PPP generic driver version 2.4.2
[    0.334463] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.334467] ehci-pci: EHCI PCI platform driver
[    0.334498] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    0.334502] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.334509] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.334525] ehci-pci 0000:00:1a.0: debug port 2
[    0.338419] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.338433] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000
[    0.349386] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.349406] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.349410] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.349414] usb usb1: Product: EHCI Host Controller
[    0.349418] usb usb1: Manufacturer: Linux 3.8.0-rc7-next20130213-2-iniza-small ehci_hcd
[    0.349422] usb usb1: SerialNumber: 0000:00:1a.0
[    0.349518] hub 1-0:1.0: USB hub found
[    0.349524] hub 1-0:1.0: 2 ports detected
[    0.349608] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    0.349612] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.349620] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.349635] ehci-pci 0000:00:1d.0: debug port 2
[    0.353546] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.353559] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000
[    0.365375] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.365388] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.365392] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.365396] usb usb2: Product: EHCI Host Controller
[    0.365399] usb usb2: Manufacturer: Linux 3.8.0-rc7-next20130213-2-iniza-small ehci_hcd
[    0.365403] usb usb2: SerialNumber: 0000:00:1d.0
[    0.365483] hub 2-0:1.0: USB hub found
[    0.365488] hub 2-0:1.0: 2 ports detected
[    0.365549] ehci-platform: EHCI generic platform driver
[    0.365557] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.365572] uhci_hcd: USB Universal Host Controller Interface driver
[    0.365616] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.365621] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[    0.375305] xhci_hcd 0000:03:00.0: irq 16, io mem 0xf0500000
[    0.375372] xhci_hcd 0000:03:00.0: irq 41 for MSI/MSI-X
[    0.375378] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[    0.375383] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[    0.375388] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[    0.375394] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[    0.375500] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.375504] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.375508] usb usb3: Product: xHCI Host Controller
[    0.375512] usb usb3: Manufacturer: Linux 3.8.0-rc7-next20130213-2-iniza-small xhci_hcd
[    0.375516] usb usb3: SerialNumber: 0000:03:00.0
[    0.375576] xHCI xhci_add_endpoint called for root hub
[    0.375578] xHCI xhci_check_bandwidth called for root hub
[    0.375600] hub 3-0:1.0: USB hub found
[    0.375610] hub 3-0:1.0: 2 ports detected
[    0.375666] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.375672] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[    0.375708] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.375712] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.375716] usb usb4: Product: xHCI Host Controller
[    0.375719] usb usb4: Manufacturer: Linux 3.8.0-rc7-next20130213-2-iniza-small xhci_hcd
[    0.375723] usb usb4: SerialNumber: 0000:03:00.0
[    0.375779] xHCI xhci_add_endpoint called for root hub
[    0.375780] xHCI xhci_check_bandwidth called for root hub
[    0.375797] hub 4-0:1.0: USB hub found
[    0.375806] hub 4-0:1.0: 2 ports detected
[    0.375943] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
[    0.383181] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.383189] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.383294] mousedev: PS/2 mouse device common for all mice
[    0.383665] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.383696] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.383777] device-mapper: uevent: version 1.0.3
[    0.383835] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel at redhat.com
[    0.383844] Intel P-state driver initializing.
[    0.383858] Intel pstate controlling: cpu 0
[    0.383877] Intel pstate controlling: cpu 1
[    0.383893] Intel pstate controlling: cpu 2
[    0.383907] Intel pstate controlling: cpu 3
[    0.384003] cpuidle: using governor ladder
[    0.384111] cpuidle: using governor menu
[    0.384118] ledtrig-cpu: registered to indicate activity on CPUs
[    0.384121] EFI Variables Facility v0.08 2004-May-17
[    0.384238] ashmem: initialized
[    0.384341] TCP: cubic registered
[    0.384434] NET: Registered protocol family 10
[    0.384609] NET: Registered protocol family 17
[    0.384621] Key type dns_resolver registered
[    0.384847] PM: Hibernation image not present or could not be loaded.
[    0.384848] Loading compiled-in X.509 certificates
[    0.385954] Loaded X.509 cert 'Magrathea: Glacier signing key: 7335e991cab80c5e8fb6f6e6fda18e072af8cb30'
[    0.385968] registered taskstats version 1
[    0.388406] Key type trusted registered
[    0.391293] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.392176] Key type encrypted registered
[    0.398523] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.398536] EDD information not available.
[    0.653288] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.654556] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
[    0.654576] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.655995] ata1.00: configured for UDMA/133
[    0.656490] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
[    0.656826] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    0.656849] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.656881] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.657169] sd 0:0:0:0: [sda] Write Protect is off
[    0.657182] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.657293] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.661212] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.668839]  sda: sda1 sda2 sda3
[    0.670510] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.793886] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    0.793906] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.794442] hub 1-1:1.0: USB hub found
[    0.794566] hub 1-1:1.0: 6 ports detected
[    0.905113] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.973061] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.973659] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133
[    0.973680] ata2.00: 31277232 sectors, multi 1: LBA48 
[    0.974357] ata2.00: configured for UDMA/133
[    0.974799] scsi 1:0:0:0: Direct-Access     ATA      SanDisk iSSD P4  SSD  PQ: 0 ANSI: 5
[    0.975154] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    0.975180] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    0.975591] sd 1:0:0:0: [sdb] Write Protect is off
[    0.975604] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    0.975762] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.976584]  sdb: sdb1 sdb2
[    0.977457] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.037713] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.037733] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.038261] hub 2-1:1.0: USB hub found
[    1.038384] hub 2-1:1.0: 6 ports detected
[    1.109157] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[    1.207363] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e
[    1.207383] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.207395] usb 1-1.2: Product: USB-PS/2 Optical Mouse
[    1.207403] usb 1-1.2: Manufacturer: Logitech
[    1.248866] tsc: Refined TSC clocksource calibration: 1596.371 MHz
[    1.248890] Switching to clocksource tsc
[    1.277022] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[    1.292809] ata4: SATA link down (SStatus 0 SControl 300)
[    1.528614] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1018
[    1.528637] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.528650] usb 1-1.4: Product: WebCam SC-13HDL11431N
[    1.528658] usb 1-1.4: Manufacturer: 123
[    1.612599] ata5: SATA link down (SStatus 0 SControl 300)
[    1.615316] Freeing unused kernel memory: 1252k freed
[    1.615705] Write protecting the kernel read-only data: 12288k
[    1.623293] Freeing unused kernel memory: 1208k freed
[    1.629574] Freeing unused kernel memory: 1108k freed
[    1.669092] udevd[121]: starting version 175
[    1.743555] usbcore: registered new interface driver usbhid
[    1.743564] usbhid: USB HID core driver
[    1.743966] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.744237] r8169 0000:02:00.0: irq 46 for MSI/MSI-X
[    1.744482] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000666000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 46
[    1.744492] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.772461] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[    1.772563] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
[    1.772708] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[    1.868533] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189
[    1.868558] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.675345] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[    4.238672] init: ureadahead main process (325) terminated with status 5
[    7.091042] Adding 262140k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:262140k 
[    7.275582] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
[    7.405291] udevd[585]: starting version 175
[    8.426158] lp: driver loaded but no devices found
[   10.135200] mei 0000:00:16.0: setting latency timer to 64
[   10.135266] mei 0000:00:16.0: irq 47 for MSI/MSI-X
[   10.211847] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130117/utaddress-251)
[   10.211856] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.211860] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
[   10.211864] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.211865] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
[   10.211868] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.211869] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
[   10.211871] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.211873] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.248260] wmi: Mapper loaded
[   10.248566] samsung_laptop: detected SABI interface: SwSmi@
[   10.248570] samsung_laptop: Backlight controlled by ACPI video driver
[   10.423923] Bluetooth: Core ver 2.16
[   10.423952] NET: Registered protocol family 31
[   10.423955] Bluetooth: HCI device and connection manager initialized
[   10.424055] Bluetooth: HCI socket layer initialized
[   10.424059] Bluetooth: L2CAP socket layer initialized
[   10.424071] Bluetooth: SCO socket layer initialized
[   10.446812] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[   10.688772] cfg80211: Calling CRDA to update world regulatory domain
[   10.712440] usbcore: registered new interface driver btusb
[   10.753557] [drm] Initialized drm 1.1.0 20060810
[   11.163048] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[   11.164893] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
[   11.166316] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
[   11.167719] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[   11.245298] Intel(R) Wireless WiFi driver for Linux, in-tree:d
[   11.245303] Copyright(c) 2003-2013 Intel Corporation
[   11.245744] iwlwifi 0000:01:00.0: irq 48 for MSI/MSI-X
[   11.329341] Linux video capture interface: v2.00
[   11.635121] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[   11.650086] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.
[   11.726553] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
[   11.893511] [drm] Memory usable by graphics device = 2048M
[   11.893519] i915 0000:00:02.0: setting latency timer to 64
[   11.932298] i915 0000:00:02.0: irq 49 for MSI/MSI-X
[   11.932314] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   11.932316] [drm] Driver supports precise vblank timestamp query.
[   11.932388] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   11.942391] [drm] Wrong MCH_SSKPD value: 0x16040307
[   11.942395] [drm] This can cause pipe underruns and display issues.
[   11.942396] [drm] Please upgrade your BIOS to fix this.
[   11.944689] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1
[   11.958989] fbcon: inteldrmfb (fb0) is primary device
[   12.220803] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018)
[   12.239984] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input6
[   12.240071] usbcore: registered new interface driver uvcvideo
[   12.240071] USB Video Class driver (1.1.1)
[   12.397205] cfg80211: World regulatory domain updated:
[   12.397206] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.397210] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.397212] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.397213] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.397214] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.397216] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.401040] ppdev: user-space parallel port driver
[   12.810920] Bluetooth: RFCOMM TTY layer initialized
[   12.810937] Bluetooth: RFCOMM socket layer initialized
[   12.810938] Bluetooth: RFCOMM ver 1.11
[   12.901633] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled
[   12.901634] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   12.901635] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   12.901636] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[   12.901637] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_P2P disabled
[   12.901639] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
[   12.901700] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   13.004539] Console: switching to colour frame buffer device 170x48
[   13.007758] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   13.007760] i915 0000:00:02.0: registered panic notifier
[   13.008890] acpi device:32: registered as cooling_device9
[   13.009047] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   13.009095] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[   13.009289] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   13.009717] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[   13.140276] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   13.296043] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   13.305101] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   13.305303] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   13.321573] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.321578] Bluetooth: BNEP filters: protocol multicast
[   13.321586] Bluetooth: BNEP socket layer initialized
[   13.622781] type=1400 audit(1360750924.626:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=966 comm="apparmor_parser"
[   13.622797] type=1400 audit(1360750924.626:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=882 comm="apparmor_parser"
[   13.623088] type=1400 audit(1360750924.626:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=809 comm="apparmor_parser"
[   13.623273] type=1400 audit(1360750924.626:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=966 comm="apparmor_parser"
[   13.623333] type=1400 audit(1360750924.626:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=882 comm="apparmor_parser"
[   13.623580] type=1400 audit(1360750924.626:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=966 comm="apparmor_parser"
[   13.623625] type=1400 audit(1360750924.626:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=809 comm="apparmor_parser"
[   13.623635] type=1400 audit(1360750924.626:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=882 comm="apparmor_parser"
[   13.623918] type=1400 audit(1360750924.626:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=809 comm="apparmor_parser"
[   13.812079] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   14.323319] type=1400 audit(1360750925.326:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=956 comm="apparmor_parser"
[   15.384874] init: failsafe main process (1017) killed by TERM signal
[   19.173722] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   19.180335] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[   19.565996] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   19.572618] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[   19.783690] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   26.250639] wlan0: authenticate with 00:04:0e:e4:00:3d
[   26.250648] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded
[   26.261855] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3)
[   26.263686] wlan0: authenticated
[   26.263854] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   26.263859] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   26.267138] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3)
[   26.270605] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1)
[   26.276041] wlan0: associated
[   26.276068] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   66.100856] usb 2-1.5: USB disconnect, device number 3
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 3.8.0-rc7-next20130213-2-iniza-small.patch
Type: application/octet-stream
Size: 46720 bytes
Desc: not available
URL: <http://lists.freedesktop.org/archives/intel-gfx/attachments/20130213/d8a87d2a/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: config-3.8.0-rc7-next20130213-2-iniza-small
Type: application/octet-stream
Size: 110887 bytes
Desc: not available
URL: <http://lists.freedesktop.org/archives/intel-gfx/attachments/20130213/d8a87d2a/attachment-0001.obj>


More information about the Intel-gfx mailing list