[Intel-gfx] [PATCH 20/36] drm/i915: move intel_crtc->fdi_lanes to pipe_config

Daniel Vetter daniel.vetter at ffwll.ch
Thu Feb 21 01:50:12 CET 2013


We need this for two reasons:
- Correct handling of shared fdi lanes on ivb with fastboot.
- Handling fdi link bw limits when we only have two fdi lanes by
  dithering down a bit.

Just search&replace in this patch, no functional change at all.

Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
 drivers/gpu/drm/i915/intel_ddi.c     |  6 +++---
 drivers/gpu/drm/i915/intel_display.c | 39 +++++++++++++++++++-----------------
 drivers/gpu/drm/i915/intel_drv.h     |  4 +++-
 3 files changed, 27 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index a9b1b0e..bed8421 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -181,7 +181,7 @@ void hsw_fdi_link_train(struct drm_crtc *crtc)
 
 	/* Enable the PCH Receiver FDI PLL */
 	rx_ctl_val = FDI_RX_PLL_ENABLE | FDI_RX_ENHANCE_FRAME_ENABLE |
-		     ((intel_crtc->fdi_lanes - 1) << 19);
+		     ((intel_crtc->config.fdi_lanes - 1) << 19);
 	if (dev_priv->fdi_rx_polarity_reversed)
 		rx_ctl_val |= FDI_RX_POLARITY_REVERSED_LPT;
 	I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
@@ -208,7 +208,7 @@ void hsw_fdi_link_train(struct drm_crtc *crtc)
 		/* Configure and enable DDI_BUF_CTL for DDI E with next voltage */
 		I915_WRITE(DDI_BUF_CTL(PORT_E),
 			   DDI_BUF_CTL_ENABLE |
-			   ((intel_crtc->fdi_lanes - 1) << 1) |
+			   ((intel_crtc->config.fdi_lanes - 1) << 1) |
 			   hsw_ddi_buf_ctl_values[i / 2]);
 		POSTING_READ(DDI_BUF_CTL(PORT_E));
 
@@ -1015,7 +1015,7 @@ void intel_ddi_enable_pipe_func(struct drm_crtc *crtc)
 
 	} else if (type == INTEL_OUTPUT_ANALOG) {
 		temp |= TRANS_DDI_MODE_SELECT_FDI;
-		temp |= (intel_crtc->fdi_lanes - 1) << 1;
+		temp |= (intel_crtc->config.fdi_lanes - 1) << 1;
 
 	} else if (type == INTEL_OUTPUT_DISPLAYPORT ||
 		   type == INTEL_OUTPUT_EDP) {
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 19d9add..92b0143 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2331,7 +2331,7 @@ static void ironlake_fdi_link_train(struct drm_crtc *crtc)
 	reg = FDI_TX_CTL(pipe);
 	temp = I915_READ(reg);
 	temp &= ~(7 << 19);
-	temp |= (intel_crtc->fdi_lanes - 1) << 19;
+	temp |= (intel_crtc->config.fdi_lanes - 1) << 19;
 	temp &= ~FDI_LINK_TRAIN_NONE;
 	temp |= FDI_LINK_TRAIN_PATTERN_1;
 	I915_WRITE(reg, temp | FDI_TX_ENABLE);
@@ -2429,7 +2429,7 @@ static void gen6_fdi_link_train(struct drm_crtc *crtc)
 	reg = FDI_TX_CTL(pipe);
 	temp = I915_READ(reg);
 	temp &= ~(7 << 19);
-	temp |= (intel_crtc->fdi_lanes - 1) << 19;
+	temp |= (intel_crtc->config.fdi_lanes - 1) << 19;
 	temp &= ~FDI_LINK_TRAIN_NONE;
 	temp |= FDI_LINK_TRAIN_PATTERN_1;
 	temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
@@ -2564,7 +2564,7 @@ static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
 	reg = FDI_TX_CTL(pipe);
 	temp = I915_READ(reg);
 	temp &= ~(7 << 19);
-	temp |= (intel_crtc->fdi_lanes - 1) << 19;
+	temp |= (intel_crtc->config.fdi_lanes - 1) << 19;
 	temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
 	temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
 	temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
@@ -2666,7 +2666,7 @@ static void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc)
 	reg = FDI_RX_CTL(pipe);
 	temp = I915_READ(reg);
 	temp &= ~((0x7 << 19) | (0x7 << 16));
-	temp |= (intel_crtc->fdi_lanes - 1) << 19;
+	temp |= (intel_crtc->config.fdi_lanes - 1) << 19;
 	temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
 	I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
 
@@ -5001,12 +5001,12 @@ static bool ironlake_check_fdi_lanes(struct intel_crtc *intel_crtc)
 		to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
 
 	DRM_DEBUG_KMS("checking fdi config on pipe %i, lanes %i\n",
-		      intel_crtc->pipe, intel_crtc->fdi_lanes);
-	if (intel_crtc->fdi_lanes > 4) {
+		      intel_crtc->pipe, intel_crtc->config.fdi_lanes);
+	if (intel_crtc->config.fdi_lanes > 4) {
 		DRM_DEBUG_KMS("invalid fdi lane config on pipe %i: %i lanes\n",
-			      intel_crtc->pipe, intel_crtc->fdi_lanes);
+			      intel_crtc->pipe, intel_crtc->config.fdi_lanes);
 		/* Clamp lanes to avoid programming the hw with bogus values. */
-		intel_crtc->fdi_lanes = 4;
+		intel_crtc->config.fdi_lanes = 4;
 
 		return false;
 	}
@@ -5019,28 +5019,31 @@ static bool ironlake_check_fdi_lanes(struct intel_crtc *intel_crtc)
 		return true;
 	case PIPE_B:
 		if (dev_priv->pipe_to_crtc_mapping[PIPE_C]->enabled &&
-		    intel_crtc->fdi_lanes > 2) {
+		    intel_crtc->config.fdi_lanes > 2) {
 			DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %i: %i lanes\n",
-				      intel_crtc->pipe, intel_crtc->fdi_lanes);
+				      intel_crtc->pipe,
+				      intel_crtc->config.fdi_lanes);
 			/* Clamp lanes to avoid programming the hw with bogus values. */
-			intel_crtc->fdi_lanes = 2;
+			intel_crtc->config.fdi_lanes = 2;
 
 			return false;
 		}
 
-		if (intel_crtc->fdi_lanes > 2)
+		if (intel_crtc->config.fdi_lanes > 2)
 			WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT);
 		else
 			cpt_enable_fdi_bc_bifurcation(dev);
 
 		return true;
 	case PIPE_C:
-		if (!pipe_B_crtc->base.enabled || pipe_B_crtc->fdi_lanes <= 2) {
-			if (intel_crtc->fdi_lanes > 2) {
+		if (!pipe_B_crtc->base.enabled ||
+		    pipe_B_crtc->config.fdi_lanes <= 2) {
+			if (intel_crtc->config.fdi_lanes > 2) {
 				DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %i: %i lanes\n",
-					      intel_crtc->pipe, intel_crtc->fdi_lanes);
+					      intel_crtc->pipe,
+					      intel_crtc->config.fdi_lanes);
 				/* Clamp lanes to avoid programming the hw with bogus values. */
-				intel_crtc->fdi_lanes = 2;
+				intel_crtc->config.fdi_lanes = 2;
 
 				return false;
 			}
@@ -5128,7 +5131,7 @@ static void ironlake_fdi_set_m_n(struct drm_crtc *crtc)
 	lane = ironlake_get_lanes_required(target_clock, link_bw,
 					   intel_crtc->config.pipe_bpp);
 
-	intel_crtc->fdi_lanes = lane;
+	intel_crtc->config.fdi_lanes = lane;
 
 	if (intel_crtc->config.pixel_multiplier > 1)
 		link_bw *= intel_crtc->config.pixel_multiplier;
@@ -5345,7 +5348,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 
 	/* Note, this also computes intel_crtc->fdi_lanes which is used below in
 	 * ironlake_check_fdi_lanes. */
-	intel_crtc->fdi_lanes = 0;
+	intel_crtc->config.fdi_lanes = 0;
 	if (intel_crtc->config.has_pch_encoder)
 		ironlake_fdi_set_m_n(crtc);
 
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 1bf130b..febdd03 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -220,6 +220,9 @@ struct intel_crtc_config {
 	int pixel_target_clock;
 	/* Used by SDVO (and if we ever fix it, HDMI). */
 	unsigned pixel_multiplier;
+
+	/* FDI lanes used, only valid if has_pch_encoder is set. */
+	int fdi_lanes;
 };
 
 struct intel_crtc {
@@ -239,7 +242,6 @@ struct intel_crtc {
 	bool lowfreq_avail;
 	struct intel_overlay *overlay;
 	struct intel_unpin_work *unpin_work;
-	int fdi_lanes;
 
 	atomic_t unpin_work_count;
 
-- 
1.7.11.4




More information about the Intel-gfx mailing list