[Intel-gfx] [PATCH 4/8] drm/i915: rip out superflous is_dp&is_cpu_edp tracking
Daniel Vetter
daniel.vetter at ffwll.ch
Fri Feb 22 01:05:03 CET 2013
The only exception left is is_cpu_edp in the haswell modeset code.
We need that to assign the cpu transcoder, but we might want to
move that eventually into the encoder, too.
Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
drivers/gpu/drm/i915/intel_display.c | 37 +++++++-----------------------------
1 file changed, 7 insertions(+), 30 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 09dda9d..d4efe97 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4475,7 +4475,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
intel_clock_t clock, reduced_clock;
u32 dspcntr, pipeconf;
bool ok, has_reduced_clock = false, is_sdvo = false;
- bool is_lvds = false, is_tv = false, is_dp = false;
+ bool is_lvds = false, is_tv = false;
struct intel_encoder *encoder;
const intel_limit_t *limit;
int ret;
@@ -4494,9 +4494,6 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
case INTEL_OUTPUT_TVOUT:
is_tv = true;
break;
- case INTEL_OUTPUT_DISPLAYPORT:
- is_dp = true;
- break;
}
num_connectors++;
@@ -4577,7 +4574,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
/* default to 8bpc */
pipeconf &= ~(PIPECONF_BPC_MASK | PIPECONF_DITHER_EN);
- if (is_dp) {
+ if (intel_crtc->config.has_dp_encoder) {
if (intel_crtc->config.dither) {
pipeconf |= PIPECONF_6BPC |
PIPECONF_DITHER_EN |
@@ -5338,7 +5335,6 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
uint32_t dpll;
int factor, num_connectors = 0;
bool is_lvds = false, is_sdvo = false, is_tv = false;
- bool is_dp = false, is_cpu_edp = false;
for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
switch (intel_encoder->type) {
@@ -5354,14 +5350,6 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
case INTEL_OUTPUT_TVOUT:
is_tv = true;
break;
- case INTEL_OUTPUT_DISPLAYPORT:
- is_dp = true;
- break;
- case INTEL_OUTPUT_EDP:
- is_dp = true;
- if (!intel_encoder_is_pch_edp(&intel_encoder->base))
- is_cpu_edp = true;
- break;
}
num_connectors++;
@@ -5393,7 +5381,8 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
}
dpll |= DPLL_DVO_HIGH_SPEED;
}
- if (is_dp && !is_cpu_edp)
+ if (intel_crtc->config.has_dp_encoder &&
+ intel_crtc->config.has_pch_encoder)
dpll |= DPLL_DVO_HIGH_SPEED;
/* compute bitmask from p1 value */
@@ -5446,7 +5435,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
intel_clock_t clock, reduced_clock;
u32 dpll, fp = 0, fp2 = 0;
bool ok, has_reduced_clock = false;
- bool is_lvds = false, is_dp = false, is_cpu_edp = false;
+ bool is_lvds = false;
struct intel_encoder *encoder;
int ret;
bool dither, fdi_config_ok;
@@ -5456,14 +5445,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
case INTEL_OUTPUT_LVDS:
is_lvds = true;
break;
- case INTEL_OUTPUT_DISPLAYPORT:
- is_dp = true;
- break;
- case INTEL_OUTPUT_EDP:
- is_dp = true;
- if (!intel_encoder_is_pch_edp(&encoder->base))
- is_cpu_edp = true;
- break;
}
num_connectors++;
@@ -5500,7 +5481,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
drm_mode_debug_printmodeline(mode);
/* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
- if (!is_cpu_edp) {
+ if (intel_crtc->config.has_pch_encoder) {
struct intel_pch_pll *pll;
pll = intel_get_pch_pll(intel_crtc, dpll, fp);
@@ -5613,18 +5594,14 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
int num_connectors = 0;
- bool is_dp = false, is_cpu_edp = false;
+ bool is_cpu_edp = false;
struct intel_encoder *encoder;
int ret;
bool dither;
for_each_encoder_on_crtc(dev, crtc, encoder) {
switch (encoder->type) {
- case INTEL_OUTPUT_DISPLAYPORT:
- is_dp = true;
- break;
case INTEL_OUTPUT_EDP:
- is_dp = true;
if (!intel_encoder_is_pch_edp(&encoder->base))
is_cpu_edp = true;
break;
--
1.7.11.4
More information about the Intel-gfx
mailing list