[Intel-gfx] [PATCH 03/10] drm/i915: add pipe_config->timings_set
Paulo Zanoni
przanoni at gmail.com
Tue Feb 26 18:23:23 CET 2013
Hi
2013/2/21 Daniel Vetter <daniel.vetter at ffwll.ch>:
> Only used by the lvds encoder. Note that we shouldn't do the same
> simple conversion with the FORCE_6BPC flag, since that's much better
> handled by moving all the pipe_bpc computation around.
>
> Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
In addition to Ville's question (which makes sense):
This patch does 2 things: it adds pipe_config->timings_set, but it
also adds the encoder->compute_config function. Even though I can see
intel_encoder->compute_config is just like drm_encoder->mode_fixup but
with different arguments, I don't think this is a trivial thing to
notice (imagine a future code reader, not someone looking at this
specific patch). It would be really nice if you could add the
compute_config callback on a separate patch and give a detailed
documentation of the expected behavior of the function for our future
readers. Bonus points if you could also add documentation for all the
other intel_encoder callbacks you've created and document their
relationship with the drm callbacks.
Also, if we agree to create a separate patch for the compute_config
callbacks, why don't we just convert all encoders to use
compute_config instead of mode_fixup in the very first patch? Looks
simpler to me.
Also, I notice that this patch series doesn't apply to
drm-intel-next-queued, only to drm-intel-nightly. I'm not sure what's
your plan regarding this, just noticing :)
> ---
> drivers/gpu/drm/i915/intel_display.c | 12 +++++++++++-
> drivers/gpu/drm/i915/intel_drv.h | 10 ++++++----
> drivers/gpu/drm/i915/intel_lvds.c | 19 +++++++++----------
> 3 files changed, 26 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 0f61008..ad03b7f 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -3930,7 +3930,7 @@ static bool intel_crtc_compute_config(struct drm_crtc *crtc,
> /* All interlaced capable intel hw wants timings in frames. Note though
> * that intel_lvds_mode_fixup does some funny tricks with the crtc
> * timings, so we need to be careful not to clobber these.*/
> - if (!(adjusted_mode->private_flags & INTEL_MODE_CRTC_TIMINGS_SET))
> + if (!pipe_config->timings_set)
> drm_mode_set_crtcinfo(adjusted_mode, 0);
>
> /* WaPruneModeWithIncorrectHsyncOffset: Cantiga+ cannot handle modes
> @@ -7509,6 +7509,16 @@ intel_modeset_pipe_config(struct drm_crtc *crtc,
>
> if (&encoder->new_crtc->base != crtc)
> continue;
> +
> + if (encoder->compute_config) {
> + if (!(encoder->compute_config(encoder, pipe_config))) {
> + DRM_DEBUG_KMS("Encoder config failure\n");
> + goto fail;
> + }
> +
> + continue;
> + }
> +
> encoder_funcs = encoder->base.helper_private;
> if (!(encoder_funcs->mode_fixup(&encoder->base,
> &pipe_config->requested_mode,
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index eca75b6..edafbef 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -105,10 +105,6 @@
> #define INTEL_MODE_PIXEL_MULTIPLIER_SHIFT (0x0)
> #define INTEL_MODE_PIXEL_MULTIPLIER_MASK (0xf << INTEL_MODE_PIXEL_MULTIPLIER_SHIFT)
> #define INTEL_MODE_DP_FORCE_6BPC (0x10)
> -/* This flag must be set by the encoder's mode_fixup if it changes the crtc
> - * timings in the mode to prevent the crtc fixup from overwriting them.
> - * Currently only lvds needs that. */
> -#define INTEL_MODE_CRTC_TIMINGS_SET (0x20)
> /*
> * Set when limited 16-235 (as opposed to full 0-255) RGB color range is
> * to be used.
> @@ -158,6 +154,8 @@ struct intel_encoder {
> bool cloneable;
> bool connectors_active;
> void (*hot_plug)(struct intel_encoder *);
> + bool (*compute_config)(struct intel_encoder *,
> + struct intel_crtc_config *);
> void (*pre_pll_enable)(struct intel_encoder *);
> void (*pre_enable)(struct intel_encoder *);
> void (*enable)(struct intel_encoder *);
> @@ -202,6 +200,10 @@ struct intel_connector {
> struct intel_crtc_config {
> struct drm_display_mode requested_mode;
> struct drm_display_mode adjusted_mode;
> + /* This flag must be set by the encoder's compute_config callback if it
> + * changes the crtc timings in the mode to prevent the crtc fixup from
> + * overwriting them. Currently only lvds needs that. */
> + bool timings_set;
> };
>
> struct intel_crtc {
> diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> index 3d1d974..1616f53 100644
> --- a/drivers/gpu/drm/i915/intel_lvds.c
> +++ b/drivers/gpu/drm/i915/intel_lvds.c
> @@ -261,8 +261,6 @@ centre_horizontally(struct drm_display_mode *mode,
>
> mode->crtc_hsync_start = mode->crtc_hblank_start + sync_pos;
> mode->crtc_hsync_end = mode->crtc_hsync_start + sync_width;
> -
> - mode->private_flags |= INTEL_MODE_CRTC_TIMINGS_SET;
> }
>
> static void
> @@ -284,8 +282,6 @@ centre_vertically(struct drm_display_mode *mode,
>
> mode->crtc_vsync_start = mode->crtc_vblank_start + sync_pos;
> mode->crtc_vsync_end = mode->crtc_vsync_start + sync_width;
> -
> - mode->private_flags |= INTEL_MODE_CRTC_TIMINGS_SET;
> }
>
> static inline u32 panel_fitter_scaling(u32 source, u32 target)
> @@ -301,15 +297,17 @@ static inline u32 panel_fitter_scaling(u32 source, u32 target)
> return (FACTOR * ratio + FACTOR/2) / FACTOR;
> }
>
> -static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
> - const struct drm_display_mode *mode,
> - struct drm_display_mode *adjusted_mode)
> +static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder,
> + struct intel_crtc_config *pipe_config)
> {
> - struct drm_device *dev = encoder->dev;
> + struct drm_device *dev = intel_encoder->base.dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> - struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(encoder);
> + struct intel_lvds_encoder *lvds_encoder =
> + to_lvds_encoder(&intel_encoder->base);
> struct intel_connector *intel_connector =
> &lvds_encoder->attached_connector->base;
> + struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
> + struct drm_display_mode *mode = &pipe_config->requested_mode;
> struct intel_crtc *intel_crtc = lvds_encoder->base.new_crtc;
> u32 pfit_control = 0, pfit_pgm_ratios = 0, border = 0;
> int pipe;
> @@ -359,6 +357,7 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
> I915_WRITE(BCLRPAT(pipe), 0);
>
> drm_mode_set_crtcinfo(adjusted_mode, 0);
> + pipe_config->timings_set = true;
>
> switch (intel_connector->panel.fitting_mode) {
> case DRM_MODE_SCALE_CENTER:
> @@ -661,7 +660,6 @@ static int intel_lvds_set_property(struct drm_connector *connector,
> }
>
> static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = {
> - .mode_fixup = intel_lvds_mode_fixup,
> .mode_set = intel_lvds_mode_set,
> };
>
> @@ -1102,6 +1100,7 @@ bool intel_lvds_init(struct drm_device *dev)
> intel_encoder->enable = intel_enable_lvds;
> intel_encoder->pre_enable = intel_pre_enable_lvds;
> intel_encoder->pre_pll_enable = intel_pre_pll_enable_lvds;
> + intel_encoder->compute_config = intel_lvds_compute_config;
> intel_encoder->disable = intel_disable_lvds;
> intel_encoder->get_hw_state = intel_lvds_get_hw_state;
> intel_connector->get_hw_state = intel_connector_get_hw_state;
> --
> 1.7.11.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Paulo Zanoni
More information about the Intel-gfx
mailing list