[Intel-gfx] [ANNOUNCE] xf86-video-intel 2.20.18
Chris Wilson
chris at chris-wilson.co.uk
Wed Jan 16 14:02:40 CET 2013
A bunch of miscellaneous fixes for assertion failures and various
performance regressions when mixing new methods for offloads, along with
a couple of improvements for rendering with gen4.
* Remove use of packed unnormalized texture coordinates on gen4/5 as
these GPUs do not support unnormalized coordinates in the sampler.
* Remove dependency upon x86 asm for cross-building to unsupported
architectures.
https://bugs.gentoo.org/show_bug.cgi?id=448570
* Apply damage around PRIME updates in the correct order.
* Correctly read the initial backlight level for when the user
overrides UXA's choice of backlight controller.
* Throttle UXA and prevent it queuing work much faster than the GPU can
complete it. This realised itself in impossible performance figures and
the entire display freezing for several seconds whlist the GPU caught
up. One side effect is that it also caused the DDX to consume more
memory than was required as it could not recycle buffers quick
enough, and in some cases this produces a marked improvement in
performance. Also note on gen2/3 this requires a new libdrm [2.4.41]
in order to prevent a bug causing the DDX to fallback to swrast.
Chris Wilson (98):
sna: Explicitly track self-relocation entries
sna/gen6+: Tweak to only consider active ring on destination
sna: Do not try and set a 0x0 mode
sna/gen6+: Tidy up ring preferences
sna/gen2,3: Remove gen-specific vertex_offset
sna: Sanity check config->compat_output
sna: Skip copying fbcon if we are already on the scanout
sna: Mark kgem_bo_retire() as static
sna: Only allocate a busy CPU bo for a GPU readback
sna/gen4+: Tidy emit_spans_solid()
sna/gen4+: Tidy emit_spans_affine()
sna/gen4+: Trim an extraneous coordinate from solid span emission
sna/gen4+: Trim an extraneous coordinate from solid composite emission
sna/gen4+: Check for a spare exec slot for an outstanding vbo
sna/gen3: Use inline transform+scale function
sna: DBG compile fixes
sna: Allow a flush to occur before batching a flush-bo
sna: Move the primary color cache into the alpha cache
sna/gen4+: Try using the BLT before doing a tiled copy
sna/dri: Gracefully handle failures from pageflip
sna: Seed the solid color cache with an invalid value to prevent false hits
uxa: Align surface allocations to even tile rows
sna/dri: Fix triple buffering to not penalise missed frames
sna/dri: Use the default choice of backend for copying the region
sna/gen6+: Hint that we prefer to use the BLT with uncached scanouts
sna/gen4: Tweak single-thread SF w/a for solids
sna/gen2: Tidy a pair of vertex emitters
sna/gen2: Always try to use the BLT pipeline first
sna: Tidy compat interfaces
sna: Remove some obsolete Options
sna: Micro-optimise glyph_valid()
sna: Fast path inplace addition of solid trapezoids
sna/gen6+: Remove vestigial CC viewport state
sna/gen4+: Tidy special handling of 2s2s vertex elements
sna/gen2+: Precompute the affine transformation scale factors
sna/gen4+: Specialise linear vertex emission
sna/gen6+: Fine tune placement of DRI copies
sna: Fix off-by-one in C version of fls
sna: Also recognise __i386__ for fls asm
sna: Add a pair of asserts to validate fls()/cache_bucket()
sna: Convert allocation request from bytes to num_pages when shrinking
sna: Flush the batch prior to referencing work from another ring
sna: Embed the pre-allocation of the static request into the device
sna: Clear up the caches after handling a request allocation failure
sna/trapezoids: filter out zero-length runs
sna/trapezoids: filter out cancelling edges upon insertion to edge-list
Revert "sna/gen4+: Backport tight vertex packing for simple renderblits"
sna/gen4+: Trim the redundant float from the fill vertices
sna/gen4+: Handle solids passed to the general texcoord emitter
sna: Try to create userptr with the unsync'ed flag set first
sna: Only disable upon a failed pageflip after at least one pipe flips
sna/dri: Transfer the DRI2 reference to the new TearFree pixmap
sna: fixup damage posting to be done correctly around slave pixmap
sna: Open-code xf86CompatOutput() to avoid invalid pointers
sna: Make sure all outputs are disabled if no CompatOutput is defined
sna: With a GPU bo and a shm source, do not fall all the way back
sna: Ignore the last pixmap cpu setting if overwritting all damage
sna: Allow CPU bo to copy to GPU bo if the device is idle.
sna: Prefer to use the GPU for copies from SHM onto tiled destinations
sna: Use some surplus bits to back our temporary pixman_image_t
intel: Throttle harder
sna: Prefer userptr if copying to a tiled bo
sna: Also prefer to use the GPU for uploads into a tiled bo
sna: Disable memcpy_to_tiled_x() uploads on 32-bit systems
sna: Reorder struct kgem_bo to move related data into the same cacheline
sna/dri: Prefer to preserve the ring of the destination bo
sna: After a size check, double check the batch before flushing
sna: Tweak max object sizes to take account of aperture restrictions
sna: Experiment with a CPU mapping for certain fallbacks
sna: Correct a few assertions after enabling read-only mappings
sna: Relax limitation on not mapping GPU bo with shadow pointers
sna: Allow creation of a CPU map for pixmaps if needed
sna: Allow large image uploads to utilize temporary mappings
sna: Use the pixmap size (not drawable) to determine replacement
sna: Add a compile flag for measuring impact of userptr uploads
sna: Check size against aperture before attempting to perform the GTT mapping
sna: Initialize src_bo to detect allocation failure
sna: Use userptr to accelerate GetImage
sna: Apply PutImage optimisations to move-to-cpu
sna: Limit temporary userptr uploads to large busy targets or LLC machines
sna: Tweak considering of last-cpu placement for inplace regions
sna: Avoid allocating an active CPU bo unnecessarily
sna: Mark uploads with async hints when appropriate
sna: Free the SHM pixmaps after b266ae6f6f
sna: Pass the async hint for the upload into the GPU
sna: Hint that a copy from a SHM bo will likely be the last in a batch
sna: Add DBG to use_shm_bo()
sna/trapezoids: Avoid the multiply for an opaque source
sna: Specialise sna_get_image_blt for clears to avoid sync readback
sna: Assert that we never try to mix INPLACE / ASYNC hints for move-to-cpu
sna: Avoid serialising on an move-to-cpu for an async operation
sna: Revert use of a separate CAN_CREATE_SMALL flag
sna: Add DBG for when we add the inplace hint
sna: Fix computation of large object sizes to prevent overflow
sna: Discard the batch if we are discarding the only buffer in it
sna: Correct DBG to refer to the actual tiling mode forced
sna: Restrict upload buffers to reduce sampler TLB misses
2.20.18 release
Dave Airlie (2):
intel: drop pointless error printf in the slave pixmap sync code.
intel: fixup damage posting to be done correctly around slave pixmap
Matt Turner (1):
sna: Rewrite __fls without dependence upon x86 assembly
Mickaël THOMAS (1):
Set initial value for backlight_active_level
git tag: 2.20.18
http://xorg.freedesktop.org/archive/individual/driver/xf86-video-intel-2.20.18.tar.bz2
MD5: 56457bda125912b803f488f779460640 xf86-video-intel-2.20.18.tar.bz2
SHA1: ca30ed7d84a02b3ccdb9e47ee876809e406822b3 xf86-video-intel-2.20.18.tar.bz2
SHA256: f3daedf9571b04234053507940ba0a221abfcd294c3c350ff49eaf499b8437b5 xf86-video-intel-2.20.18.tar.bz2
http://xorg.freedesktop.org/archive/individual/driver/xf86-video-intel-2.20.18.tar.gz
MD5: dd1e212394f489624807495b5540924e xf86-video-intel-2.20.18.tar.gz
SHA1: 4a285a94968af73e972b15972f57b85dfec58bc7 xf86-video-intel-2.20.18.tar.gz
SHA256: d0ae1cd7aadd7ace87f4d702df7e583c6c331e7dc5e39b9f1e70ca21416a5978 xf86-video-intel-2.20.18.tar.gz
--
Chris Wilson, Intel Open Source Technology Centre
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
URL: <http://lists.freedesktop.org/archives/intel-gfx/attachments/20130116/bd9608c8/attachment.sig>
More information about the Intel-gfx
mailing list