[Intel-gfx] [PATCH 12/33] drm/i915: Cursor registers need an offset on VLV

[ville.syrjala at linux.intel.com]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

CURSIZE is not present on VLV, so it was left out, as were the IVB
specific cursor B registers.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index b859914..f31d770 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2940,7 +2940,7 @@
 #define PIPE_FRMCOUNT_GM45(pipe) _PIPE(pipe, _PIPEA_FRMCOUNT_GM45, _PIPEB_FRMCOUNT_GM45)
 
 /* Cursor A & B regs */
-#define _CURACNTR		0x70080
+#define _CURACNTR		(dev_priv->info->display_mmio_offset + 0x70080)
 /* Old style CUR*CNTR flags (desktop 8xx) */
 #define   CURSOR_ENABLE		0x80000000
 #define   CURSOR_GAMMA_ENABLE	0x40000000
@@ -2961,16 +2961,16 @@
 #define   MCURSOR_PIPE_A	0x00
 #define   MCURSOR_PIPE_B	(1 << 28)
 #define   MCURSOR_GAMMA_ENABLE  (1 << 26)
-#define _CURABASE		0x70084
-#define _CURAPOS			0x70088
+#define _CURABASE		(dev_priv->info->display_mmio_offset + 0x70084)
+#define _CURAPOS		(dev_priv->info->display_mmio_offset + 0x70088)
 #define   CURSOR_POS_MASK       0x007FF
 #define   CURSOR_POS_SIGN       0x8000
 #define   CURSOR_X_SHIFT        0
 #define   CURSOR_Y_SHIFT        16
 #define CURSIZE			0x700a0
-#define _CURBCNTR		0x700c0
-#define _CURBBASE		0x700c4
-#define _CURBPOS			0x700c8
+#define _CURBCNTR		(dev_priv->info->display_mmio_offset + 0x700c0)
+#define _CURBBASE		(dev_priv->info->display_mmio_offset + 0x700c4)
+#define _CURBPOS		(dev_priv->info->display_mmio_offset + 0x700c8)
 
 #define _CURBCNTR_IVB		0x71080
 #define _CURBBASE_IVB		0x71084
-- 
1.7.12.4