[Intel-gfx] [PATCH 2/9] drm/i915: Use cpu_transcoder for HSW_TVIDEO_DIP_* instead of pipe
Paulo Zanoni
przanoni at gmail.com
Thu Jan 31 21:18:27 CET 2013
Hi
2013/1/30 Rodrigo Vivi <rodrigo.vivi at gmail.com>:
> While old platforms had 3 transcoders and 3 pipes (1:1), HSW has 4 transcoders and 3 pipes. To avoid future mistakes transcoders must be used here instead of pipes even though it is working right now by coincidence.
Not by coincidence: these regs are currently only used by HDMI code
and HDMI code never uses TRANSCODER_EDP, so using "pipe" instead of
cpu_transcoder" is correct, since on HDMI pipe is always the same
thing as cpu_transcoder. Now that we're going to start to use these
registers for DP your patch is needed.
My only complaint about this patch (besides the sentence above) would
be due to using more than 80 columns, both on the commit message and
coding :)
Reviewed-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
>
> Signed-off-by: Rodrigo Vivi <rodrigo.vivi at gmail.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 16 ++++++++--------
> drivers/gpu/drm/i915/intel_hdmi.c | 12 ++++++------
> 2 files changed, 14 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 2521617..7bb3134 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -3742,14 +3742,14 @@
> #define HSW_VIDEO_DIP_VSC_ECC_B 0x61344
> #define HSW_VIDEO_DIP_GCP_B 0x61210
>
> -#define HSW_TVIDEO_DIP_CTL(pipe) \
> - _PIPE(pipe, HSW_VIDEO_DIP_CTL_A, HSW_VIDEO_DIP_CTL_B)
> -#define HSW_TVIDEO_DIP_AVI_DATA(pipe) \
> - _PIPE(pipe, HSW_VIDEO_DIP_AVI_DATA_A, HSW_VIDEO_DIP_AVI_DATA_B)
> -#define HSW_TVIDEO_DIP_SPD_DATA(pipe) \
> - _PIPE(pipe, HSW_VIDEO_DIP_SPD_DATA_A, HSW_VIDEO_DIP_SPD_DATA_B)
> -#define HSW_TVIDEO_DIP_GCP(pipe) \
> - _PIPE(pipe, HSW_VIDEO_DIP_GCP_A, HSW_VIDEO_DIP_GCP_B)
> +#define HSW_TVIDEO_DIP_CTL(trans) \
> + _TRANSCODER(trans, HSW_VIDEO_DIP_CTL_A, HSW_VIDEO_DIP_CTL_B)
> +#define HSW_TVIDEO_DIP_AVI_DATA(trans) \
> + _TRANSCODER(trans, HSW_VIDEO_DIP_AVI_DATA_A, HSW_VIDEO_DIP_AVI_DATA_B)
> +#define HSW_TVIDEO_DIP_SPD_DATA(trans) \
> + _TRANSCODER(trans, HSW_VIDEO_DIP_SPD_DATA_A, HSW_VIDEO_DIP_SPD_DATA_B)
> +#define HSW_TVIDEO_DIP_GCP(trans) \
> + _TRANSCODER(trans, HSW_VIDEO_DIP_GCP_A, HSW_VIDEO_DIP_GCP_B)
>
> #define _TRANS_HTOTAL_B 0xe1000
> #define _TRANS_HBLANK_B 0xe1004
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index d53b731..ab95e05 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -120,13 +120,13 @@ static u32 hsw_infoframe_enable(struct dip_infoframe *frame)
> }
> }
>
> -static u32 hsw_infoframe_data_reg(struct dip_infoframe *frame, enum pipe pipe)
> +static u32 hsw_infoframe_data_reg(struct dip_infoframe *frame, enum transcoder cpu_transcoder)
> {
> switch (frame->type) {
> case DIP_TYPE_AVI:
> - return HSW_TVIDEO_DIP_AVI_DATA(pipe);
> + return HSW_TVIDEO_DIP_AVI_DATA(cpu_transcoder);
> case DIP_TYPE_SPD:
> - return HSW_TVIDEO_DIP_SPD_DATA(pipe);
> + return HSW_TVIDEO_DIP_SPD_DATA(cpu_transcoder);
> default:
> DRM_DEBUG_DRIVER("unknown info frame type %d\n", frame->type);
> return 0;
> @@ -293,8 +293,8 @@ static void hsw_write_infoframe(struct drm_encoder *encoder,
> struct drm_device *dev = encoder->dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
> - u32 ctl_reg = HSW_TVIDEO_DIP_CTL(intel_crtc->pipe);
> - u32 data_reg = hsw_infoframe_data_reg(frame, intel_crtc->pipe);
> + u32 ctl_reg = HSW_TVIDEO_DIP_CTL(intel_crtc->cpu_transcoder);
> + u32 data_reg = hsw_infoframe_data_reg(frame, intel_crtc->cpu_transcoder);
> unsigned int i, len = DIP_HEADER_SIZE + frame->len;
> u32 val = I915_READ(ctl_reg);
>
> @@ -566,7 +566,7 @@ static void hsw_set_infoframes(struct drm_encoder *encoder,
> struct drm_i915_private *dev_priv = encoder->dev->dev_private;
> struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
> struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
> - u32 reg = HSW_TVIDEO_DIP_CTL(intel_crtc->pipe);
> + u32 reg = HSW_TVIDEO_DIP_CTL(intel_crtc->cpu_transcoder);
> u32 val = I915_READ(reg);
>
> assert_hdmi_port_disabled(intel_hdmi);
> --
> 1.7.11.7
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Paulo Zanoni
More information about the Intel-gfx
mailing list