[Intel-gfx] [PATCH] drm/i915: Match all PSR mode entry conditions before enabling it.
Rodrigo Vivi
rodrigo.vivi at gmail.com
Tue Jul 2 02:50:39 CEST 2013
v2: Prefer seq_puts to seq_printf by Paulo Zanoni.
v3: small changes like avoiding calling dp_to_dig_port twice as noticed by
Paulo Zanoni.
v4: Avoiding reading non-existent registers - noticed by Paulo
on first psr debugfs patch.
Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi at gmail.com>
---
drivers/gpu/drm/i915/i915_debugfs.c | 41 ++++++++++++++++++----
drivers/gpu/drm/i915/i915_drv.h | 12 +++++++
drivers/gpu/drm/i915/intel_dp.c | 68 ++++++++++++++++++++++++++++++++++++-
3 files changed, 113 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index bbdcdae..154bd99 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -1882,17 +1882,44 @@ static int i915_edp_psr_status(struct seq_file *m, void *data)
struct drm_info_node *node = m->private;
struct drm_device *dev = node->minor->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 psrctl, psrstat, psrperf;
+ u32 psrstat, psrperf;
- if (!IS_HASWELL(dev)) {
- seq_puts(m, "PSR not supported on this platform\n");
+ if (IS_HASWELL(dev) && I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE) {
+ seq_puts(m, "PSR enabled\n");
+ } else {
+ seq_puts(m, "PSR disabled: ");
+ switch (dev_priv->no_psr_reason) {
+ case PSR_NO_SOURCE:
+ seq_puts(m, "not supported on this platform");
+ break;
+ case PSR_NO_SINK:
+ seq_puts(m, "not supported by panel");
+ break;
+ case PSR_CRTC_NOT_ACTIVE:
+ seq_puts(m, "crtc not active");
+ break;
+ case PSR_PWR_WELL_ENABLED:
+ seq_puts(m, "power well enabled");
+ break;
+ case PSR_NOT_TILED:
+ seq_puts(m, "not tiled");
+ break;
+ case PSR_SPRITE_ENABLED:
+ seq_puts(m, "sprite enabled");
+ break;
+ case PSR_INTERLACED_ENABLED:
+ seq_puts(m, "interlaced enabled");
+ break;
+ case PSR_HSW_NOT_DDIA:
+ seq_puts(m, "HSW ties PSR to DDI A (eDP)");
+ break;
+ default:
+ seq_puts(m, "unknown reason");
+ }
+ seq_puts(m, "\n");
return 0;
}
- psrctl = I915_READ(EDP_PSR_CTL);
- seq_printf(m, "PSR Enabled: %s\n",
- yesno(psrctl & EDP_PSR_ENABLE));
-
psrstat = I915_READ(EDP_PSR_STATUS_CTL);
seq_puts(m, "PSR Current State: ");
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 56bd82b..f08c1d9 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -543,6 +543,17 @@ enum no_fbc_reason {
FBC_CHIP_DEFAULT, /* disabled by default on this chip */
};
+enum no_psr_reason {
+ PSR_NO_SOURCE, /* Not supported on platform */
+ PSR_NO_SINK, /* Not supported by panel */
+ PSR_CRTC_NOT_ACTIVE,
+ PSR_PWR_WELL_ENABLED,
+ PSR_NOT_TILED,
+ PSR_SPRITE_ENABLED,
+ PSR_INTERLACED_ENABLED,
+ PSR_HSW_NOT_DDIA,
+};
+
enum intel_pch {
PCH_NONE = 0, /* No PCH present */
PCH_IBX, /* Ibexpeak PCH */
@@ -1146,6 +1157,7 @@ typedef struct drm_i915_private {
struct i915_power_well power_well;
enum no_fbc_reason no_fbc_reason;
+ enum no_psr_reason no_psr_reason;
struct drm_mm_node *compressed_fb;
struct drm_mm_node *compressed_llb;
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 5b49e31..54e4c35 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1462,11 +1462,77 @@ static void intel_edp_psr_enable_source(struct intel_dp *intel_dp)
EDP_PSR_ENABLE);
}
+static bool intel_edp_psr_match_conditions(struct intel_dp *intel_dp)
+{
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_crtc *crtc = dig_port->base.base.crtc;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_i915_gem_object *obj = to_intel_framebuffer(crtc->fb)->obj;
+ struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base;
+
+ if (!IS_HASWELL(dev)) {
+ DRM_DEBUG_KMS("PSR not supported on this platform\n");
+ dev_priv->no_psr_reason = PSR_NO_SOURCE;
+ return false;
+ }
+
+ if ((intel_encoder->type != INTEL_OUTPUT_EDP) ||
+ (dig_port->port != PORT_A)) {
+ DRM_DEBUG_KMS("HSW ties PSR to DDI A (eDP)\n");
+ dev_priv->no_psr_reason = PSR_HSW_NOT_DDIA;
+ return false;
+ }
+
+ if (!is_edp_psr(intel_dp)) {
+ DRM_DEBUG_KMS("PSR not supported by this panel\n");
+ dev_priv->no_psr_reason = PSR_NO_SINK;
+ return false;
+ }
+
+ if (!intel_crtc->active || !crtc->fb || !crtc->mode.clock) {
+ DRM_DEBUG_KMS("crtc not active for PSR\n");
+ dev_priv->no_psr_reason = PSR_CRTC_NOT_ACTIVE;
+ return false;
+ }
+
+ if ((I915_READ(HSW_PWR_WELL_DRIVER) & HSW_PWR_WELL_ENABLE) ||
+ (I915_READ(HSW_PWR_WELL_KVMR) & HSW_PWR_WELL_ENABLE)) {
+ DRM_DEBUG_KMS("PSR condition failed: Power Well is Enabled\n");
+ dev_priv->no_psr_reason = PSR_PWR_WELL_ENABLED;
+ return false;
+ }
+
+ if (obj->tiling_mode != I915_TILING_X ||
+ obj->fence_reg == I915_FENCE_REG_NONE) {
+ DRM_DEBUG_KMS("PSR condition failed: fb not tiled or fenced\n");
+ dev_priv->no_psr_reason = PSR_NOT_TILED;
+ return false;
+ }
+
+ if (I915_READ(SPRCTL(intel_crtc->pipe)) & SPRITE_ENABLE) {
+ DRM_DEBUG_KMS("PSR condition failed: Sprite is Enabled\n");
+ dev_priv->no_psr_reason = PSR_SPRITE_ENABLED;
+ return false;
+ }
+
+ if ((I915_READ(PIPECONF(intel_crtc->config.cpu_transcoder)) &
+ PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK) {
+ DRM_DEBUG_KMS("PSR condition failed: Interlaced is Enabled\n");
+ dev_priv->no_psr_reason = PSR_INTERLACED_ENABLED;
+ return false;
+ }
+
+ return true;
+}
+
void intel_edp_psr_enable(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
- if (!is_edp_psr(intel_dp) || intel_edp_is_psr_enabled(dev))
+ if (!intel_edp_psr_match_conditions(intel_dp) ||
+ intel_edp_is_psr_enabled(dev))
return;
/* Enable PSR on the panel */
--
1.8.1.4
More information about the Intel-gfx
mailing list