[Intel-gfx] [PATCH 1/2] drm/i915: Don't attempt to read an unitialized stack value

[Damien Lespiau]

If intel_sdvo_get_value() fails here, val is unitialized and the cross
check will compare the pipe config multiplier with a bogus value.

Instead, only set encoder_pixel_multiplier when the sdvo command has
been successful. The cross check will compare the pipe config value with
0 otherwise.

v2: Do the cross check with the initial value of encoder_pixel_multiplier (0)
if the sdvo command fails (and thus keep the warning) (Daniel Vetter)

Signed-off-by: Damien Lespiau <damien.lespiau at intel.com>
---
 drivers/gpu/drm/i915/intel_sdvo.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index b8e1623..eb2a603 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1357,17 +1357,19 @@ static void intel_sdvo_get_config(struct intel_encoder *encoder,
 	}
 
 	/* Cross check the port pixel multiplier with the sdvo encoder state. */
-	intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_CLOCK_RATE_MULT, &val, 1);
-	switch (val) {
-	case SDVO_CLOCK_RATE_MULT_1X:
-		encoder_pixel_multiplier = 1;
-		break;
-	case SDVO_CLOCK_RATE_MULT_2X:
-		encoder_pixel_multiplier = 2;
-		break;
-	case SDVO_CLOCK_RATE_MULT_4X:
-		encoder_pixel_multiplier = 4;
-		break;
+	if (intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_CLOCK_RATE_MULT,
+				 &val, 1)) {
+		switch (val) {
+		case SDVO_CLOCK_RATE_MULT_1X:
+			encoder_pixel_multiplier = 1;
+			break;
+		case SDVO_CLOCK_RATE_MULT_2X:
+			encoder_pixel_multiplier = 2;
+			break;
+		case SDVO_CLOCK_RATE_MULT_4X:
+			encoder_pixel_multiplier = 4;
+			break;
+		}
 	}
 
 	if(HAS_PCH_SPLIT(dev))
-- 
1.8.3.1