[Intel-gfx] [PATCH 1/2] drm/i915: set default value for config->pixel_multiplier

[Daniel Vetter]

This way we can simplify the code quite a bit.

Also add a WARN in the sdvo code to complain about a bogus value
and kill the readout code in intel_ddi.c that Jesse sneaked in.
HW state readout for the pixel multiplier will work a bit differently
in the end.

v2: Rebase on top of the fdi pixel mutliplier handling fix.

Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
 drivers/gpu/drm/i915/intel_ddi.c     |  1 -
 drivers/gpu/drm/i915/intel_display.c | 29 ++++++++++-------------------
 drivers/gpu/drm/i915/intel_sdvo.c    |  1 +
 3 files changed, 11 insertions(+), 20 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 486c46b..224ce25 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1279,7 +1279,6 @@ static void intel_ddi_get_config(struct intel_encoder *encoder,
 		flags |= DRM_MODE_FLAG_NVSYNC;
 
 	pipe_config->adjusted_mode.flags |= flags;
-	pipe_config->pixel_multiplier = 1;
 }
 
 static void intel_ddi_destroy(struct drm_encoder *encoder)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 2b6e141..9f772eb 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4006,8 +4006,7 @@ retry:
 	link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
 
 	fdi_dotclock = adjusted_mode->clock;
-	if (pipe_config->pixel_multiplier > 1)
-		fdi_dotclock /= pipe_config->pixel_multiplier;
+	fdi_dotclock /= pipe_config->pixel_multiplier;
 
 	lane = ironlake_get_lanes_required(fdi_dotclock, link_bw,
 					   pipe_config->pipe_bpp);
@@ -4461,11 +4460,8 @@ static void vlv_update_pll(struct intel_crtc *crtc)
 	if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
 		DRM_ERROR("DPLL %d failed to lock\n", pipe);
 
-	dpll_md = 0;
-	if (crtc->config.pixel_multiplier > 1) {
-		dpll_md = (crtc->config.pixel_multiplier - 1)
-			<< DPLL_MD_UDI_MULTIPLIER_SHIFT;
-	}
+	dpll_md = (crtc->config.pixel_multiplier - 1)
+		<< DPLL_MD_UDI_MULTIPLIER_SHIFT;
 	I915_WRITE(DPLL_MD(pipe), dpll_md);
 	POSTING_READ(DPLL_MD(pipe));
 
@@ -4499,8 +4495,7 @@ static void i9xx_update_pll(struct intel_crtc *crtc,
 	else
 		dpll |= DPLLB_MODE_DAC_SERIAL;
 
-	if ((crtc->config.pixel_multiplier > 1) &&
-	    (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))) {
+	if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
 		dpll |= (crtc->config.pixel_multiplier - 1)
 			<< SDVO_MULTIPLIER_SHIFT_HIRES;
 	}
@@ -4563,11 +4558,8 @@ static void i9xx_update_pll(struct intel_crtc *crtc,
 	udelay(150);
 
 	if (INTEL_INFO(dev)->gen >= 4) {
-		u32 dpll_md = 0;
-		if (crtc->config.pixel_multiplier > 1) {
-			dpll_md = (crtc->config.pixel_multiplier - 1)
-				<< DPLL_MD_UDI_MULTIPLIER_SHIFT;
-		}
+		u32 dpll_md = (crtc->config.pixel_multiplier - 1)
+			<< DPLL_MD_UDI_MULTIPLIER_SHIFT;
 		I915_WRITE(DPLL_MD(pipe), dpll_md);
 	} else {
 		/* The pixel multiplier can only be updated once the
@@ -5616,10 +5608,8 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
 	else
 		dpll |= DPLLB_MODE_DAC_SERIAL;
 
-	if (intel_crtc->config.pixel_multiplier > 1) {
-		dpll |= (intel_crtc->config.pixel_multiplier - 1)
-			<< PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
-	}
+	dpll |= (intel_crtc->config.pixel_multiplier - 1)
+		<< PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
 
 	if (is_sdvo)
 		dpll |= DPLL_DVO_HIGH_SPEED;
@@ -7783,8 +7773,9 @@ intel_modeset_pipe_config(struct drm_crtc *crtc,
 		goto fail;
 
 encoder_retry:
-	/* Ensure the port clock default is reset when retrying. */
+	/* Ensure the port clock defaults are reset when retrying. */
 	pipe_config->port_clock = 0;
+	pipe_config->pixel_multiplier = 1;
 
 	/* Pass our mode to the connectors and the CRTC to give them a chance to
 	 * adjust it according to limitations or connector properties, and also
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 7068195..f4588a2 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1219,6 +1219,7 @@ static void intel_sdvo_mode_set(struct intel_encoder *intel_encoder)
 
 	switch (intel_crtc->config.pixel_multiplier) {
 	default:
+		WARN(1, "unknown pixel mutlipler specified\n");
 	case 1: rate = SDVO_CLOCK_RATE_MULT_1X; break;
 	case 2: rate = SDVO_CLOCK_RATE_MULT_2X; break;
 	case 4: rate = SDVO_CLOCK_RATE_MULT_4X; break;
-- 
1.7.11.7