[Intel-gfx] [PATCH 1/2] drm/i915: move find_pll callback to dev_priv->display
Daniel Vetter
daniel.vetter at ffwll.ch
Mon Jun 3 20:56:23 CEST 2013
Now that the DP madness is cleared out, this is all only per-platform.
So move it out from the intel clock limits structure.
While at it drop the intel prefix on the static functions, call the
vtable entry find_dpll (since it's for the display pll) and rip out
the now unnecessary forward declarations.
Note that the parameters of ->find_dpll are still unchanged, but they
eventually need to be moved over to just take in a pipe configuration.
But currently a lot of things are still missing from the pipe
configuration (reflock, output-specific dpll limits and preferences,
downclocked dotclock). So this will happen in a later step.
Note that intel_g4x_limit has a peculiar case where it selects
intel_limits_i9xx_sdvo as the limit. This is pretty bogus and also not
used since the only output types left are DP and native TV-out which
both use special pre-tuned dpll values.
v2: Re-add comment for the find_pll callback (requested by Paulo) and
elaborate on why the transformation is correct for g4x platforms (to
clarify a review question from Paulo). Double up on that by adding a
WARN as suggested by Paulo Zanoni on irc.
v3: Initialize limits to NULL since gcc is now unhappy.
Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
drivers/gpu/drm/i915/i915_drv.h | 20 +++++++
drivers/gpu/drm/i915/intel_display.c | 112 +++++++++++------------------------
2 files changed, 54 insertions(+), 78 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 359a200..6e104ef 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -306,6 +306,8 @@ struct drm_i915_error_state {
struct intel_crtc_config;
struct intel_crtc;
+struct intel_limit;
+struct dpll;
struct drm_i915_display_funcs {
bool (*fbc_enabled)(struct drm_device *dev);
@@ -313,6 +315,24 @@ struct drm_i915_display_funcs {
void (*disable_fbc)(struct drm_device *dev);
int (*get_display_clock_speed)(struct drm_device *dev);
int (*get_fifo_size)(struct drm_device *dev, int plane);
+ /**
+ * find_dpll() - Find the best values for the PLL
+ * @limit: limits for the PLL
+ * @crtc: current CRTC
+ * @target: target frequency in kHz
+ * @refclk: reference clock frequency in kHz
+ * @match_clock: if provided, @best_clock P divider must
+ * match the P divider from @match_clock
+ * used for LVDS downclocking
+ * @best_clock: best PLL values found
+ *
+ * Returns true on success, false on failure.
+ */
+ bool (*find_dpll)(const struct intel_limit *limit,
+ struct drm_crtc *crtc,
+ int target, int refclk,
+ struct dpll *match_clock,
+ struct dpll *best_clock);
void (*update_wm)(struct drm_device *dev);
void (*update_sprite_wm)(struct drm_device *dev, int pipe,
uint32_t sprite_width, int pixel_size,
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 7b0b16b..874441e 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -59,24 +59,6 @@ typedef struct intel_limit intel_limit_t;
struct intel_limit {
intel_range_t dot, vco, n, m, m1, m2, p, p1;
intel_p2_t p2;
- /**
- * find_pll() - Find the best values for the PLL
- * @limit: limits for the PLL
- * @crtc: current CRTC
- * @target: target frequency in kHz
- * @refclk: reference clock frequency in kHz
- * @match_clock: if provided, @best_clock P divider must
- * match the P divider from @match_clock
- * used for LVDS downclocking
- * @best_clock: best PLL values found
- *
- * Returns true on success, false on failure.
- */
- bool (*find_pll)(const intel_limit_t *limit,
- struct drm_crtc *crtc,
- int target, int refclk,
- intel_clock_t *match_clock,
- intel_clock_t *best_clock);
};
/* FDI */
@@ -92,23 +74,6 @@ intel_pch_rawclk(struct drm_device *dev)
return I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK;
}
-static bool
-intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *match_clock,
- intel_clock_t *best_clock);
-static bool
-intel_pnv_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *match_clock,
- intel_clock_t *best_clock);
-static bool
-intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *match_clock,
- intel_clock_t *best_clock);
-static bool
-intel_vlv_find_best_pll(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *match_clock,
- intel_clock_t *best_clock);
-
static inline u32 /* units of 100MHz */
intel_fdi_link_freq(struct drm_device *dev)
{
@@ -130,7 +95,6 @@ static const intel_limit_t intel_limits_i8xx_dvo = {
.p1 = { .min = 2, .max = 33 },
.p2 = { .dot_limit = 165000,
.p2_slow = 4, .p2_fast = 2 },
- .find_pll = intel_find_best_PLL,
};
static const intel_limit_t intel_limits_i8xx_lvds = {
@@ -144,7 +108,6 @@ static const intel_limit_t intel_limits_i8xx_lvds = {
.p1 = { .min = 1, .max = 6 },
.p2 = { .dot_limit = 165000,
.p2_slow = 14, .p2_fast = 7 },
- .find_pll = intel_find_best_PLL,
};
static const intel_limit_t intel_limits_i9xx_sdvo = {
@@ -158,7 +121,6 @@ static const intel_limit_t intel_limits_i9xx_sdvo = {
.p1 = { .min = 1, .max = 8 },
.p2 = { .dot_limit = 200000,
.p2_slow = 10, .p2_fast = 5 },
- .find_pll = intel_find_best_PLL,
};
static const intel_limit_t intel_limits_i9xx_lvds = {
@@ -172,7 +134,6 @@ static const intel_limit_t intel_limits_i9xx_lvds = {
.p1 = { .min = 1, .max = 8 },
.p2 = { .dot_limit = 112000,
.p2_slow = 14, .p2_fast = 7 },
- .find_pll = intel_find_best_PLL,
};
@@ -189,7 +150,6 @@ static const intel_limit_t intel_limits_g4x_sdvo = {
.p2_slow = 10,
.p2_fast = 10
},
- .find_pll = intel_g4x_find_best_PLL,
};
static const intel_limit_t intel_limits_g4x_hdmi = {
@@ -203,7 +163,6 @@ static const intel_limit_t intel_limits_g4x_hdmi = {
.p1 = { .min = 1, .max = 8},
.p2 = { .dot_limit = 165000,
.p2_slow = 10, .p2_fast = 5 },
- .find_pll = intel_g4x_find_best_PLL,
};
static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
@@ -218,7 +177,6 @@ static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
.p2 = { .dot_limit = 0,
.p2_slow = 14, .p2_fast = 14
},
- .find_pll = intel_g4x_find_best_PLL,
};
static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
@@ -233,7 +191,6 @@ static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
.p2 = { .dot_limit = 0,
.p2_slow = 7, .p2_fast = 7
},
- .find_pll = intel_g4x_find_best_PLL,
};
static const intel_limit_t intel_limits_pineview_sdvo = {
@@ -249,7 +206,6 @@ static const intel_limit_t intel_limits_pineview_sdvo = {
.p1 = { .min = 1, .max = 8 },
.p2 = { .dot_limit = 200000,
.p2_slow = 10, .p2_fast = 5 },
- .find_pll = intel_pnv_find_best_PLL,
};
static const intel_limit_t intel_limits_pineview_lvds = {
@@ -263,7 +219,6 @@ static const intel_limit_t intel_limits_pineview_lvds = {
.p1 = { .min = 1, .max = 8 },
.p2 = { .dot_limit = 112000,
.p2_slow = 14, .p2_fast = 14 },
- .find_pll = intel_pnv_find_best_PLL,
};
/* Ironlake / Sandybridge
@@ -282,7 +237,6 @@ static const intel_limit_t intel_limits_ironlake_dac = {
.p1 = { .min = 1, .max = 8 },
.p2 = { .dot_limit = 225000,
.p2_slow = 10, .p2_fast = 5 },
- .find_pll = intel_g4x_find_best_PLL,
};
static const intel_limit_t intel_limits_ironlake_single_lvds = {
@@ -296,7 +250,6 @@ static const intel_limit_t intel_limits_ironlake_single_lvds = {
.p1 = { .min = 2, .max = 8 },
.p2 = { .dot_limit = 225000,
.p2_slow = 14, .p2_fast = 14 },
- .find_pll = intel_g4x_find_best_PLL,
};
static const intel_limit_t intel_limits_ironlake_dual_lvds = {
@@ -310,7 +263,6 @@ static const intel_limit_t intel_limits_ironlake_dual_lvds = {
.p1 = { .min = 2, .max = 8 },
.p2 = { .dot_limit = 225000,
.p2_slow = 7, .p2_fast = 7 },
- .find_pll = intel_g4x_find_best_PLL,
};
/* LVDS 100mhz refclk limits. */
@@ -325,7 +277,6 @@ static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
.p1 = { .min = 2, .max = 8 },
.p2 = { .dot_limit = 225000,
.p2_slow = 14, .p2_fast = 14 },
- .find_pll = intel_g4x_find_best_PLL,
};
static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
@@ -339,7 +290,6 @@ static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
.p1 = { .min = 2, .max = 6 },
.p2 = { .dot_limit = 225000,
.p2_slow = 7, .p2_fast = 7 },
- .find_pll = intel_g4x_find_best_PLL,
};
static const intel_limit_t intel_limits_vlv_dac = {
@@ -353,7 +303,6 @@ static const intel_limit_t intel_limits_vlv_dac = {
.p1 = { .min = 1, .max = 3 },
.p2 = { .dot_limit = 270000,
.p2_slow = 2, .p2_fast = 20 },
- .find_pll = intel_vlv_find_best_pll,
};
static const intel_limit_t intel_limits_vlv_hdmi = {
@@ -367,7 +316,6 @@ static const intel_limit_t intel_limits_vlv_hdmi = {
.p1 = { .min = 2, .max = 3 },
.p2 = { .dot_limit = 270000,
.p2_slow = 2, .p2_fast = 20 },
- .find_pll = intel_vlv_find_best_pll,
};
static const intel_limit_t intel_limits_vlv_dp = {
@@ -381,7 +329,6 @@ static const intel_limit_t intel_limits_vlv_dp = {
.p1 = { .min = 1, .max = 3 },
.p2 = { .dot_limit = 270000,
.p2_slow = 2, .p2_fast = 20 },
- .find_pll = intel_vlv_find_best_pll,
};
static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
@@ -411,7 +358,7 @@ static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
- const intel_limit_t *limit;
+ const intel_limit_t *limit = NULL;
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
if (intel_is_dual_link_lvds(dev))
@@ -423,8 +370,8 @@ static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
limit = &intel_limits_g4x_hdmi;
} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
limit = &intel_limits_g4x_sdvo;
- } else /* The option is for other outputs */
- limit = &intel_limits_i9xx_sdvo;
+ } else
+ WARN_ON(1);
return limit;
}
@@ -537,7 +484,7 @@ static bool intel_PLL_is_valid(struct drm_device *dev,
}
static bool
-intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
+i9xx_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
int target, int refclk, intel_clock_t *match_clock,
intel_clock_t *best_clock)
{
@@ -599,9 +546,9 @@ intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
}
static bool
-intel_pnv_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *match_clock,
- intel_clock_t *best_clock)
+pnv_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
+ int target, int refclk, intel_clock_t *match_clock,
+ intel_clock_t *best_clock)
{
struct drm_device *dev = crtc->dev;
intel_clock_t clock;
@@ -661,9 +608,9 @@ intel_pnv_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
}
static bool
-intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *match_clock,
- intel_clock_t *best_clock)
+g4x_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
+ int target, int refclk, intel_clock_t *match_clock,
+ intel_clock_t *best_clock)
{
struct drm_device *dev = crtc->dev;
intel_clock_t clock;
@@ -718,9 +665,9 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
}
static bool
-intel_vlv_find_best_pll(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *match_clock,
- intel_clock_t *best_clock)
+vlv_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
+ int target, int refclk, intel_clock_t *match_clock,
+ intel_clock_t *best_clock)
{
u32 p1, p2, m1, m2, vco, bestn, bestm1, bestm2, bestp1, bestp2;
u32 m, n, fastclk;
@@ -4910,8 +4857,8 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
* reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
*/
limit = intel_limit(crtc, refclk);
- ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL,
- &clock);
+ ok = dev_priv->display.find_dpll(limit, crtc, adjusted_mode->clock,
+ refclk, NULL, &clock);
if (!ok) {
DRM_ERROR("Couldn't find PLL settings for mode!\n");
return -EINVAL;
@@ -4927,10 +4874,10 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
* by using the FP0/FP1. In such case we will disable the LVDS
* downclock feature.
*/
- has_reduced_clock = limit->find_pll(limit, crtc,
+ has_reduced_clock =
+ dev_priv->display.find_dpll(limit, crtc,
dev_priv->lvds_downclock,
- refclk,
- &clock,
+ refclk, &clock,
&reduced_clock);
}
/* Compat-code for transition, will disappear. */
@@ -5546,8 +5493,8 @@ static bool ironlake_compute_clocks(struct drm_crtc *crtc,
* reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
*/
limit = intel_limit(crtc, refclk);
- ret = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL,
- clock);
+ ret = dev_priv->display.find_dpll(limit, crtc, adjusted_mode->clock,
+ refclk, NULL, clock);
if (!ret)
return false;
@@ -5558,11 +5505,11 @@ static bool ironlake_compute_clocks(struct drm_crtc *crtc,
* by using the FP0/FP1. In such case we will disable the LVDS
* downclock feature.
*/
- *has_reduced_clock = limit->find_pll(limit, crtc,
- dev_priv->lvds_downclock,
- refclk,
- clock,
- reduced_clock);
+ *has_reduced_clock =
+ dev_priv->display.find_dpll(limit, crtc,
+ dev_priv->lvds_downclock,
+ refclk, clock,
+ reduced_clock);
}
return true;
@@ -9073,6 +9020,15 @@ static void intel_init_display(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
+ if (HAS_PCH_SPLIT(dev) || IS_G4X(dev))
+ dev_priv->display.find_dpll = g4x_find_best_dpll;
+ else if (IS_VALLEYVIEW(dev))
+ dev_priv->display.find_dpll = vlv_find_best_dpll;
+ else if (IS_PINEVIEW(dev))
+ dev_priv->display.find_dpll = pnv_find_best_dpll;
+ else
+ dev_priv->display.find_dpll = i9xx_find_best_dpll;
+
if (HAS_DDI(dev)) {
dev_priv->display.get_pipe_config = haswell_get_pipe_config;
dev_priv->display.crtc_mode_set = haswell_crtc_mode_set;
--
1.7.11.7
More information about the Intel-gfx
mailing list