[Intel-gfx] [PATCH 03/24] drm/i915: assert_spin_locked for pipestat interrupt enable/disable

[Daniel Vetter]

Just to keep the paranoia equal also sprinkle locking asserts over the
pipestat interrupt enable/disable functions.

Again this results in false positives in the interrupt setup. Add
bogo-locking for these and a big comment explaining why it's there and
that it's indeed unnecessary.

Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
 drivers/gpu/drm/i915/i915_irq.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 969da20..c0b6c85 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -329,6 +329,8 @@ i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
 	u32 reg = PIPESTAT(pipe);
 	u32 pipestat = I915_READ(reg) & 0x7fff0000;
 
+	assert_spin_locked(&dev_priv->irq_lock);
+
 	if ((pipestat & mask) == mask)
 		return;
 
@@ -344,6 +346,8 @@ i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
 	u32 reg = PIPESTAT(pipe);
 	u32 pipestat = I915_READ(reg) & 0x7fff0000;
 
+	assert_spin_locked(&dev_priv->irq_lock);
+
 	if ((pipestat & mask) == 0)
 		return;
 
@@ -2681,7 +2685,7 @@ static int ironlake_irq_postinstall(struct drm_device *dev)
 	ibx_irq_postinstall(dev);
 
 	if (IS_IRONLAKE_M(dev)) {
-		/* Clear & enable PCU event interrupts
+		/* Enable PCU event interrupts
 		 *
 		 * spinlocking not required here for correctness since interrupt
 		 * setup is guaranteed to run in single-threaded context. But we
@@ -2758,6 +2762,7 @@ static int valleyview_irq_postinstall(struct drm_device *dev)
 	u32 gt_irqs;
 	u32 enable_mask;
 	u32 pipestat_enable = PLANE_FLIP_DONE_INT_EN_VLV;
+	unsigned long irqflags;
 
 	enable_mask = I915_DISPLAY_PORT_INTERRUPT;
 	enable_mask |= I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
@@ -2783,9 +2788,13 @@ static int valleyview_irq_postinstall(struct drm_device *dev)
 	I915_WRITE(PIPESTAT(1), 0xffff);
 	POSTING_READ(VLV_IER);
 
+	/* Interrup setup is already guaranteed to be single-threaded, this is
+	 * just to make the assert_spin_locked check happy. */
+	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
 	i915_enable_pipestat(dev_priv, 0, pipestat_enable);
 	i915_enable_pipestat(dev_priv, 0, PIPE_GMBUS_EVENT_ENABLE);
 	i915_enable_pipestat(dev_priv, 1, pipestat_enable);
+	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
 
 	I915_WRITE(VLV_IIR, 0xffffffff);
 	I915_WRITE(VLV_IIR, 0xffffffff);
@@ -3267,6 +3276,7 @@ static int i965_irq_postinstall(struct drm_device *dev)
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	u32 enable_mask;
 	u32 error_mask;
+	unsigned long irqflags;
 
 	/* Unmask the interrupts that we always want on. */
 	dev_priv->irq_mask = ~(I915_ASLE_INTERRUPT |
@@ -3285,7 +3295,11 @@ static int i965_irq_postinstall(struct drm_device *dev)
 	if (IS_G4X(dev))
 		enable_mask |= I915_BSD_USER_INTERRUPT;
 
+	/* Interrup setup is already guaranteed to be single-threaded, this is
+	 * just to make the assert_spin_locked check happy. */
+	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
 	i915_enable_pipestat(dev_priv, 0, PIPE_GMBUS_EVENT_ENABLE);
+	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
 
 	/*
 	 * Enable some error detection, note the instruction error mask
-- 
1.8.1.4