[Intel-gfx] [PATCH 11/13] drm/i915: PSR: Make a clear separation between Sink (Panel) and Source (HW) enabling.
Daniel Vetter
daniel at ffwll.ch
Thu Jun 13 15:01:46 CEST 2013
On Wed, Jun 12, 2013 at 05:55:52PM -0300, Rodrigo Vivi wrote:
> Signed-off-by: Rodrigo Vivi <rodrigo.vivi at gmail.com>
Shouldn't that be folded into an earlier patch?
-Daniel
> ---
> drivers/gpu/drm/i915/intel_dp.c | 169 +++++++++++++++++++++-------------------
> 1 file changed, 87 insertions(+), 82 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index a7f3bd1..c5ea419 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -1362,7 +1362,79 @@ static bool intel_edp_is_psr_enabled(struct drm_device *dev)
> return I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE;
> }
>
> -static void intel_edp_psr_enable_src(struct intel_dp *intel_dp)
> +
> +void intel_edp_psr_write_vsc(struct intel_dp* intel_dp,
> + struct edp_vsc_psr *vsc_psr)
> +{
> + struct drm_device *dev = intel_dp_to_dev(intel_dp);
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> + struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc);
> +
> + u32 ctl_reg = HSW_TVIDEO_DIP_CTL(crtc->config.cpu_transcoder);
> + u32 data_reg = HSW_TVIDEO_DIP_VSC_DATA(crtc->config.cpu_transcoder);
> + uint32_t *data = (uint32_t *) vsc_psr;
> + unsigned int i;
> + u32 val = I915_READ(ctl_reg);
> +
> + /* As per eDP spec, wait for vblank to send SDP VSC packet */
> + intel_wait_for_vblank(dev, crtc->pipe);
> +
> + /* As per BSPec (Pipe Video Data Island Packet), besides wait for
> + vsync we need to disable the video DIP being updated before program
> + video DIP data buffer registers for DIP being updated.*/
> + I915_WRITE(ctl_reg, val & ~VIDEO_DIP_ENABLE_VSC_HSW);
> + POSTING_READ(ctl_reg);
> +
> + for (i = 0; i < VIDEO_DIP_VSC_DATA_SIZE; i += 4) {
> + if (i < sizeof(struct edp_vsc_psr))
> + I915_WRITE(data_reg + i, *data++);
> + else
> + I915_WRITE(data_reg + i, 0);
> + }
> +
> + I915_WRITE(ctl_reg, val | VIDEO_DIP_ENABLE_VSC_HSW);
> + POSTING_READ(ctl_reg);
> +}
> +
> +static void intel_edp_psr_enable_sink(struct intel_dp *intel_dp)
> +{
> + struct drm_device *dev = intel_dp_to_dev(intel_dp);
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct edp_vsc_psr psr_vsc;
> + uint32_t aux_clock_divider = get_aux_clock_divider(intel_dp);
> + int precharge = 0x3;
> + int msg_size = 5; /* Header(4) + Message(1) */
> +
> + /* Prepare VSC packet as per EDP 1.3 spec, Table 3.10 */
> + memset(&psr_vsc, 0, sizeof(psr_vsc));
> + psr_vsc.sdp_header.HB0 = 0;
> + psr_vsc.sdp_header.HB1 = 0x7;
> + psr_vsc.sdp_header.HB2 = 0x2;
> + psr_vsc.sdp_header.HB3 = 0x8;
> + intel_edp_psr_write_vsc(intel_dp, &psr_vsc);
> +
> + /* Enable PSR in sink */
> + if (intel_dp->psr_dpcd[1] & DP_PSR_NO_TRAIN_ON_EXIT)
> + intel_dp_aux_native_write_1(intel_dp, DP_PSR_EN_CFG,
> + DP_PSR_ENABLE &
> + ~DP_PSR_MAIN_LINK_ACTIVE);
> + else
> + intel_dp_aux_native_write_1(intel_dp, DP_PSR_EN_CFG,
> + DP_PSR_ENABLE |
> + DP_PSR_MAIN_LINK_ACTIVE);
> +
> + /* Setup AUX registers */
> + I915_WRITE(EDP_PSR_AUX_DATA1, EDP_PSR_DPCD_COMMAND);
> + I915_WRITE(EDP_PSR_AUX_DATA2, EDP_PSR_DPCD_NORMAL_OPERATION);
> + I915_WRITE(EDP_PSR_AUX_CTL,
> + DP_AUX_CH_CTL_TIME_OUT_400us |
> + (msg_size << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
> + (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
> + (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT));
> +}
> +
> +static void intel_edp_psr_enable_source(struct intel_dp *intel_dp)
> {
> struct drm_device *dev = intel_dp_to_dev(intel_dp);
> struct drm_i915_private *dev_priv = dev->dev_private;
> @@ -1415,44 +1487,29 @@ static void intel_edp_psr_enable_src(struct intel_dp *intel_dp)
> };
> }
>
> + /* Avoid continuous PSR exit by masking memup and hpd */
> + I915_WRITE(EDP_PSR_DEBUG_CTL, EDP_PSR_DEBUG_MASK_MEMUP |
> + EDP_PSR_DEBUG_MASK_HPD);
> +
> + /* Disable unused interrupts */
> + I915_WRITE(GEN6_PMINTRMSK, GEN6_PM_RP_UP_EI_EXPIRED |
> + GEN6_PM_RP_DOWN_EI_EXPIRED);
> +
> +
> I915_WRITE(EDP_PSR_CTL, val |
> EDP_PSR_MIN_LINK_ENTRY_TIME_8_LINES |
> max_sleep_time << EDP_PSR_MAX_SLEEP_TIME_SHIFT |
> EDP_PSR_ENABLE);
> }
>
> -void intel_edp_psr_write_vsc(struct intel_dp* intel_dp,
> - struct edp_vsc_psr *vsc_psr)
> +static void intel_edp_psr_do_enable(struct intel_dp* intel_dp)
> {
> - struct drm_device *dev = intel_dp_to_dev(intel_dp);
> - struct drm_i915_private *dev_priv = dev->dev_private;
> - struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> - struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc);
> -
> - u32 ctl_reg = HSW_TVIDEO_DIP_CTL(crtc->config.cpu_transcoder);
> - u32 data_reg = HSW_TVIDEO_DIP_VSC_DATA(crtc->config.cpu_transcoder);
> - uint32_t *data = (uint32_t *) vsc_psr;
> - unsigned int i;
> - u32 val = I915_READ(ctl_reg);
> -
> - /* As per eDP spec, wait for vblank to send SDP VSC packet */
> - intel_wait_for_vblank(dev, crtc->pipe);
> -
> - /* As per BSPec (Pipe Video Data Island Packet), besides wait for
> - vsync we need to disable the video DIP being updated before program
> - video DIP data buffer registers for DIP being updated.*/
> - I915_WRITE(ctl_reg, val & ~VIDEO_DIP_ENABLE_VSC_HSW);
> - POSTING_READ(ctl_reg);
>
> - for (i = 0; i < VIDEO_DIP_VSC_DATA_SIZE; i += 4) {
> - if (i < sizeof(struct edp_vsc_psr))
> - I915_WRITE(data_reg + i, *data++);
> - else
> - I915_WRITE(data_reg + i, 0);
> - }
> + /* Enable PSR on the panel */
> + intel_edp_psr_enable_sink(intel_dp);
>
> - I915_WRITE(ctl_reg, val | VIDEO_DIP_ENABLE_VSC_HSW);
> - POSTING_READ(ctl_reg);
> + /* Enable PSR on the host */
> + intel_edp_psr_enable_source(intel_dp);
> }
>
> static bool intel_edp_psr_match_conditions(struct intel_dp *intel_dp)
> @@ -1526,58 +1583,6 @@ static bool intel_edp_psr_match_conditions(struct intel_dp *intel_dp)
> return true;
> }
>
> -void intel_edp_psr_do_enable(struct intel_dp* intel_dp)
> -{
> - struct drm_device *dev = intel_dp_to_dev(intel_dp);
> - struct drm_i915_private *dev_priv = dev->dev_private;
> - struct edp_vsc_psr psr_vsc;
> - uint32_t aux_clock_divider = get_aux_clock_divider(intel_dp);
> - int precharge = 0x3;
> - int msg_size = 5; /* Header(4) + Message(1) */
> -
> - if (!intel_edp_psr_match_conditions(intel_dp) ||
> - intel_edp_is_psr_enabled(dev))
> - return;
> -
> - /* Prepare VSC packet as per EDP 1.3 spec, Table 3.10 */
> - memset(&psr_vsc, 0, sizeof(psr_vsc));
> - psr_vsc.sdp_header.HB0 = 0;
> - psr_vsc.sdp_header.HB1 = 0x7;
> - psr_vsc.sdp_header.HB2 = 0x2;
> - psr_vsc.sdp_header.HB3 = 0x8;
> - intel_edp_psr_write_vsc(intel_dp, &psr_vsc);
> -
> - /* Enable PSR in sink */
> - if (intel_dp->psr_dpcd[1] & DP_PSR_NO_TRAIN_ON_EXIT)
> - intel_dp_aux_native_write_1(intel_dp, DP_PSR_EN_CFG,
> - DP_PSR_ENABLE &
> - ~DP_PSR_MAIN_LINK_ACTIVE);
> - else
> - intel_dp_aux_native_write_1(intel_dp, DP_PSR_EN_CFG,
> - DP_PSR_ENABLE |
> - DP_PSR_MAIN_LINK_ACTIVE);
> -
> - /* Setup AUX registers */
> - I915_WRITE(EDP_PSR_AUX_DATA1, EDP_PSR_DPCD_COMMAND);
> - I915_WRITE(EDP_PSR_AUX_DATA2, EDP_PSR_DPCD_NORMAL_OPERATION);
> - I915_WRITE(EDP_PSR_AUX_CTL,
> - DP_AUX_CH_CTL_TIME_OUT_400us |
> - (msg_size << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
> - (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
> - (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT));
> -
> - /* Avoid continuous PSR exit by masking memup and hpd */
> - I915_WRITE(EDP_PSR_DEBUG_CTL, EDP_PSR_DEBUG_MASK_MEMUP |
> - EDP_PSR_DEBUG_MASK_HPD);
> -
> - /* Disable unused interrupts */
> - I915_WRITE(GEN6_PMINTRMSK, GEN6_PM_RP_UP_EI_EXPIRED |
> - GEN6_PM_RP_DOWN_EI_EXPIRED);
> -
> - /* Enable PSR on the host */
> - intel_edp_psr_enable_src(intel_dp);
> -}
> -
> void intel_edp_psr_enable(struct intel_dp* intel_dp)
> {
> struct drm_device *dev = intel_dp_to_dev(intel_dp);
> --
> 1.7.11.7
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
More information about the Intel-gfx
mailing list