[Intel-gfx] [PATCH 1/4] ALSA: hda - Haswell converter power state D0 verify

[Wang, Xingchao]

> -----Original Message-----
> From: Takashi Iwai [mailto:tiwai at suse.de]
> Sent: Monday, June 17, 2013 5:01 PM
> To: Wang Xingchao
> Cc: daniel.vetter at ffwll.ch; alsa-devel at alsa-project.org;
> intel-gfx at lists.freedesktop.org; david.henningsson at canonical.com; Wang,
> Xingchao
> Subject: Re: [PATCH 1/4] ALSA: hda - Haswell converter power state D0 verify
> 
> At Fri, 14 Jun 2013 23:20:26 +0800,
> Wang Xingchao wrote:
> >
> > Haswell converters maybe in wrong power state before usage.
> > i.e. only converter 0 is in D0, converter 1/2 are in D3.
> > When pin choose converter 1/2, there's no audio output.
> >
> > Signed-off-by: Wang Xingchao <xingchao.wang at linux.intel.com>
> 
> Isn't this needed in hdmi_setup_stream() instead of open, like
> haswell_verify_pin_D0() does?  Note that the open callback won't be called at
> PM resume.  Also, if it's just a matter of the connected converter from the
> specific pin, you can check the power state of the specific converter, instead of
> checking the all converters at each time.
> 
> If my guess above is correct, the better code would be to merge the power
> check of converter into haswell_verify_pin_D0().

Good point, will merge it into haswell_verify_pin_D0(), should the API name change accordingly?

Thanks
--xingchao
> 
> 
> thanks,
> 
> Takashi
> 
> 
> > ---
> >  sound/pci/hda/patch_hdmi.c | 20 ++++++++++++++++++++
> >  1 file changed, 20 insertions(+)
> >
> > diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
> > index e12f7a0..8db5eb6 100644
> > --- a/sound/pci/hda/patch_hdmi.c
> > +++ b/sound/pci/hda/patch_hdmi.c
> > @@ -1053,6 +1053,23 @@ static void haswell_verify_pin_D0(struct
> hda_codec *codec, hda_nid_t nid)
> >  	}
> >  }
> >
> > +static void hsw_verify_cvt_D0(struct hdmi_spec *spec,
> > +			 struct hda_codec *codec)
> > +{
> > +	struct hdmi_spec_per_cvt *per_cvt;
> > +	int pwr, cvt_idx;
> > +
> > +	for (cvt_idx = 0; cvt_idx < spec->num_cvts; cvt_idx++) {
> > +		per_cvt = get_cvt(spec, cvt_idx);
> > +		pwr = snd_hda_codec_read(codec, per_cvt->cvt_nid, 0,
> > +				AC_VERB_GET_POWER_STATE, 0);
> > +		pwr = (pwr & AC_PWRST_ACTUAL) >> AC_PWRST_ACTUAL_SHIFT;
> > +		if (pwr != AC_PWRST_D0)
> > +			snd_hda_codec_write(codec, per_cvt->cvt_nid, 0,
> AC_VERB_SET_POWER_STATE,
> > +					    AC_PWRST_D0);
> > +	}
> > +}
> > +
> >  /*
> >   * Callbacks
> >   */
> > @@ -1122,6 +1139,9 @@ static int hdmi_pcm_open(struct
> hda_pcm_stream *hinfo,
> >  	per_pin = get_pin(spec, pin_idx);
> >  	eld = &per_pin->sink_eld;
> >
> > +	if (codec->vendor_id == 0x80862807)
> > +		hsw_verify_cvt_D0(spec, codec);
> > +
> >  	/* Dynamically assign converter to stream */
> >  	for (cvt_idx = 0; cvt_idx < spec->num_cvts; cvt_idx++) {
> >  		per_cvt = get_cvt(spec, cvt_idx);
> > --
> > 1.8.1.2
> >