[Intel-gfx] [PATCH] Lower threshold for pixel doubling.

Stuart Abercrombie sabercrombie at google.com
Tue Jun 25 01:28:15 CEST 2013


This is with the patch.


On Sun, Jun 23, 2013 at 11:59 PM, Daniel Vetter <daniel at ffwll.ch> wrote:

> On Sat, Jun 22, 2013 at 12:52 AM, Stuart Abercrombie
> <sabercrombie at google.com> wrote:
> > Maybe I missed something, but I didn't see a response to this.  Can we
> get
> > this fix in?
>
> Sorry for the delay, I've lost track of this. Can you please boot with
> drm.debug=0xe and attach the full dmesg (with or without your patch)?
> -Daniel
>
> >
> >
> > On Wed, May 29, 2013 at 9:22 AM, Stuart Abercrombie
> > <sabercrombie at google.com> wrote:
> >>
> >> Without this change I saw PIPE_FIFO_UNDERRUN_STATUS set in PIPEASTAT,
> >> which I took to indicate an underrun problem.
> >>
> >> Here's what I found with other modes on this monitor:
> >>
> >> 1920x1200 works with pixel doubling enabled. Pixel clock 193.2 MHz.
> >> 2048x1152 works with pixel doubling enabled. Pixel clock 198.0 MHz.
> >> 1600x1200 works with pixel doubling disabled. Pixel clock 162.0 MHz.
> >> 2048x1280 fails with pixel doubling disabled. PIxel clock 174.2 MHz..
> >>
> >> Based on this, it seems the threshold needs to be be between 162.0MHz
> and
> >> 174.2MHz, whereas currently it's at 180MHz.  The change puts it at
> 170MHz.
> >>
> >> Stuart
> >>
> >>
> >> On Wed, May 29, 2013 at 8:22 AM, Daniel Vetter <daniel at ffwll.ch> wrote:
> >>>
> >>> On Tue, May 28, 2013 at 10:39:07AM -0700, Stuart Abercrombie wrote:
> >>> > Any comments?
> >>> >
> >>> > Without this, plugging one of the older Chromebook models into a Dell
> >>> > U3011
> >>> > monitor produces a garbled display at the default 2048x1280
> resolution.
> >>> >
> >>> > The original threshold was apparently fairly arbitrary:
> >>> >
> >>> >
> >>> >
> http://cgit.freedesktop.org/~anholt/xf86-video-intel/commit/?id=8fcf9a81179ee8577ddab5e904c58fbfd14cf59c
> >>>
> >>> Do you see any pipe underruns without this patch? There are some
> not-yet
> >>> implemented tricks we should be pulling around re-splitting DSP_ARB
> fifo
> >>> entries, which tend to totally kill high-res modes.
> >>> -Daniel
> >>>
> >>> > .
> >>> >
> >>> > Stuart
> >>> >
> >>> >
> >>> > On Mon, May 20, 2013 at 11:15 AM, Stuart Abercrombie <
> >>> > sabercrombie at chromium.org> wrote:
> >>> >
> >>> > > 90% of core speed (=180MHz dot clock) is too high for 2048x1280 to
> >>> > > get
> >>> > > pixel doubling on Pineview, which it needs to avoid underruns, so
> >>> > > lower this to 85%.
> >>> > >
> >>> > > Signed-off-by: Stuart Abercrombie <sabercrombie at chromium.org>
> >>> > > ---
> >>> > >  drivers/gpu/drm/i915/intel_display.c | 4 ++--
> >>> > >  1 file changed, 2 insertions(+), 2 deletions(-)
> >>> > >
> >>> > > diff --git a/drivers/gpu/drm/i915/intel_display.c
> >>> > > b/drivers/gpu/drm/i915/intel_display.c
> >>> > > index efe8299..9c924e9 100644
> >>> > > --- a/drivers/gpu/drm/i915/intel_display.c
> >>> > > +++ b/drivers/gpu/drm/i915/intel_display.c
> >>> > > @@ -4564,14 +4564,14 @@ static void i9xx_set_pipeconf(struct
> >>> > > intel_crtc
> >>> > > *intel_crtc)
> >>> > >         pipeconf = I915_READ(PIPECONF(intel_crtc->pipe));
> >>> > >
> >>> > >         if (intel_crtc->pipe == 0 && INTEL_INFO(dev)->gen < 4) {
> >>> > > -               /* Enable pixel doubling when the dot clock is >
> 90%
> >>> > > of
> >>> > > the (display)
> >>> > > +               /* Enable pixel doubling when the dot clock is >
> 85%
> >>> > > of
> >>> > > the (display)
> >>> > >                  * core speed.
> >>> > >                  *
> >>> > >                  * XXX: No double-wide on 915GM pipe B. Is that the
> >>> > > only
> >>> > > reason for the
> >>> > >                  * pipe == 0 check?
> >>> > >                  */
> >>> > >                 if (intel_crtc->config.requested_mode.clock >
> >>> > > -                   dev_priv->display.get_display_clock_speed(dev)
> *
> >>> > > 9 /
> >>> > > 10)
> >>> > > +                   dev_priv->display.get_display_clock_speed(dev)
> *
> >>> > > 17 /
> >>> > > 20)
> >>> > >                         pipeconf |= PIPECONF_DOUBLE_WIDE;
> >>> > >                 else
> >>> > >                         pipeconf &= ~PIPECONF_DOUBLE_WIDE;
> >>> > > --
> >>> > > 1.8.2.1
> >>> > >
> >>> > >
> >>>
> >>> > _______________________________________________
> >>> > Intel-gfx mailing list
> >>> > Intel-gfx at lists.freedesktop.org
> >>> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> >>>
> >>>
> >>> --
> >>> Daniel Vetter
> >>> Software Engineer, Intel Corporation
> >>> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
> >>
> >>
> >
>
>
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/intel-gfx/attachments/20130624/f21dde0b/attachment.html>
-------------- next part --------------
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.4.0 (chrome-bot at build45-m2) (gcc version 4.7.x-google 20130114 (prerelease) (4.7.2_cos_gg_c8f69e0) ) #7 SMP Thu Jun 20 19:04:02 PDT 2013
[    0.000000] Disabled fast string operations
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 0000000000001000 (usable)
[    0.000000]  BIOS-e820: 00000000fffff000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.00 by INSYDE Corp.
[    0.000000] efi:  ACPI=0x7f5f2000  ACPI 2.0=0x7f5f2014  SMBIOS=0x7f495d98 
[    0.000000] efi: No EFI runtime due to 32/64-bit mismatch with kernel
[    0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[    0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000000e000) (0MB)
[    0.000000] efi: mem02: type=3, attr=0xf, range=[0x000000000000e000-0x0000000000010000) (0MB)
[    0.000000] efi: mem03: type=7, attr=0xf, range=[0x0000000000010000-0x000000000002e000) (0MB)
[    0.000000] efi: mem04: type=3, attr=0xf, range=[0x000000000002e000-0x000000000002f000) (0MB)
[    0.000000] efi: mem05: type=4, attr=0xf, range=[0x000000000002f000-0x0000000000030000) (0MB)
[    0.000000] efi: mem06: type=3, attr=0xf, range=[0x0000000000030000-0x000000000008f000) (0MB)
[    0.000000] efi: mem07: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
[    0.000000] efi: mem08: type=3, attr=0xf, range=[0x0000000000090000-0x00000000000a0000) (0MB)
[    0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000b00000) (10MB)
[    0.000000] efi: mem10: type=3, attr=0xf, range=[0x0000000000b00000-0x0000000000f00000) (4MB)
[    0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000000f00000-0x0000000001000000) (1MB)
[    0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000001000000-0x000000007bf0a000) (1967MB)
[    0.000000] efi: mem13: type=4, attr=0xf, range=[0x000000007bf0a000-0x000000007bf28000) (0MB)
[    0.000000] efi: mem14: type=7, attr=0xf, range=[0x000000007bf28000-0x000000007bf2f000) (0MB)
[    0.000000] efi: mem15: type=1, attr=0xf, range=[0x000000007bf2f000-0x000000007bf37000) (0MB)
[    0.000000] efi: mem16: type=4, attr=0xf, range=[0x000000007bf37000-0x000000007bf7b000) (0MB)
[    0.000000] efi: mem17: type=3, attr=0xf, range=[0x000000007bf7b000-0x000000007bf81000) (0MB)
[    0.000000] efi: mem18: type=4, attr=0xf, range=[0x000000007bf81000-0x000000007bf9c000) (0MB)
[    0.000000] efi: mem19: type=7, attr=0xf, range=[0x000000007bf9c000-0x000000007bf9d000) (0MB)
[    0.000000] efi: mem20: type=4, attr=0xf, range=[0x000000007bf9d000-0x000000007c1d8000) (2MB)
[    0.000000] efi: mem21: type=7, attr=0xf, range=[0x000000007c1d8000-0x000000007c1dc000) (0MB)
[    0.000000] efi: mem22: type=4, attr=0xf, range=[0x000000007c1dc000-0x000000007c1e2000) (0MB)
[    0.000000] efi: mem23: type=7, attr=0xf, range=[0x000000007c1e2000-0x000000007c1e3000) (0MB)
[    0.000000] efi: mem24: type=4, attr=0xf, range=[0x000000007c1e3000-0x000000007c212000) (0MB)
[    0.000000] efi: mem25: type=3, attr=0xf, range=[0x000000007c212000-0x000000007c217000) (0MB)
[    0.000000] efi: mem26: type=4, attr=0xf, range=[0x000000007c217000-0x000000007c21a000) (0MB)
[    0.000000] efi: mem27: type=3, attr=0xf, range=[0x000000007c21a000-0x000000007c21d000) (0MB)
[    0.000000] efi: mem28: type=4, attr=0xf, range=[0x000000007c21d000-0x000000007c223000) (0MB)
[    0.000000] efi: mem29: type=3, attr=0xf, range=[0x000000007c223000-0x000000007c229000) (0MB)
[    0.000000] efi: mem30: type=4, attr=0xf, range=[0x000000007c229000-0x000000007c22a000) (0MB)
[    0.000000] efi: mem31: type=3, attr=0xf, range=[0x000000007c22a000-0x000000007c230000) (0MB)
[    0.000000] efi: mem32: type=4, attr=0xf, range=[0x000000007c230000-0x000000007c231000) (0MB)
[    0.000000] efi: mem33: type=3, attr=0xf, range=[0x000000007c231000-0x000000007c23b000) (0MB)
[    0.000000] efi: mem34: type=4, attr=0xf, range=[0x000000007c23b000-0x000000007c23c000) (0MB)
[    0.000000] efi: mem35: type=3, attr=0xf, range=[0x000000007c23c000-0x000000007c240000) (0MB)
[    0.000000] efi: mem36: type=4, attr=0xf, range=[0x000000007c240000-0x000000007c261000) (0MB)
[    0.000000] efi: mem37: type=3, attr=0xf, range=[0x000000007c261000-0x000000007c262000) (0MB)
[    0.000000] efi: mem38: type=4, attr=0xf, range=[0x000000007c262000-0x000000007c263000) (0MB)
[    0.000000] efi: mem39: type=3, attr=0xf, range=[0x000000007c263000-0x000000007c264000) (0MB)
[    0.000000] efi: mem40: type=4, attr=0xf, range=[0x000000007c264000-0x000000007c265000) (0MB)
[    0.000000] efi: mem41: type=3, attr=0xf, range=[0x000000007c265000-0x000000007c26c000) (0MB)
[    0.000000] efi: mem42: type=4, attr=0xf, range=[0x000000007c26c000-0x000000007c26f000) (0MB)
[    0.000000] efi: mem43: type=3, attr=0xf, range=[0x000000007c26f000-0x000000007c271000) (0MB)
[    0.000000] efi: mem44: type=4, attr=0xf, range=[0x000000007c271000-0x000000007c273000) (0MB)
[    0.000000] efi: mem45: type=3, attr=0xf, range=[0x000000007c273000-0x000000007c275000) (0MB)
[    0.000000] efi: mem46: type=4, attr=0xf, range=[0x000000007c275000-0x000000007c276000) (0MB)
[    0.000000] efi: mem47: type=3, attr=0xf, range=[0x000000007c276000-0x000000007c27b000) (0MB)
[    0.000000] efi: mem48: type=4, attr=0xf, range=[0x000000007c27b000-0x000000007c62e000) (3MB)
[    0.000000] efi: mem49: type=3, attr=0xf, range=[0x000000007c62e000-0x000000007c634000) (0MB)
[    0.000000] efi: mem50: type=4, attr=0xf, range=[0x000000007c634000-0x000000007c635000) (0MB)
[    0.000000] efi: mem51: type=3, attr=0xf, range=[0x000000007c635000-0x000000007c637000) (0MB)
[    0.000000] efi: mem52: type=4, attr=0xf, range=[0x000000007c637000-0x000000007c63e000) (0MB)
[    0.000000] efi: mem53: type=3, attr=0xf, range=[0x000000007c63e000-0x000000007c65c000) (0MB)
[    0.000000] efi: mem54: type=4, attr=0xf, range=[0x000000007c65c000-0x000000007c6ac000) (0MB)
[    0.000000] efi: mem55: type=3, attr=0xf, range=[0x000000007c6ac000-0x000000007c6bc000) (0MB)
[    0.000000] efi: mem56: type=4, attr=0xf, range=[0x000000007c6bc000-0x000000007f23f000) (43MB)
[    0.000000] efi: mem57: type=3, attr=0xf, range=[0x000000007f23f000-0x000000007f33f000) (1MB)
[    0.000000] efi: mem58: type=5, attr=0x800000000000000f, range=[0x000000007f33f000-0x000000007f370000) (0MB)
[    0.000000] efi: mem59: type=5, attr=0x800000000000000f, range=[0x000000007f370000-0x000000007f3bf000) (0MB)
[    0.000000] efi: mem60: type=6, attr=0x800000000000000f, range=[0x000000007f3bf000-0x000000007f416000) (0MB)
[    0.000000] efi: mem61: type=6, attr=0x800000000000000f, range=[0x000000007f416000-0x000000007f43f000) (0MB)
[    0.000000] efi: mem62: type=0, attr=0xf, range=[0x000000007f43f000-0x000000007f486000) (0MB)
[    0.000000] efi: mem63: type=0, attr=0xf, range=[0x000000007f486000-0x000000007f4bf000) (0MB)
[    0.000000] efi: mem64: type=10, attr=0xf, range=[0x000000007f4bf000-0x000000007f582000) (0MB)
[    0.000000] efi: mem65: type=10, attr=0xf, range=[0x000000007f582000-0x000000007f5bf000) (0MB)
[    0.000000] efi: mem66: type=9, attr=0xf, range=[0x000000007f5bf000-0x000000007f5e2000) (0MB)
[    0.000000] efi: mem67: type=9, attr=0xf, range=[0x000000007f5e2000-0x000000007f5f3000) (0MB)
[    0.000000] efi: mem68: type=4, attr=0xf, range=[0x000000007f5f3000-0x000000007f600000) (0MB)
[    0.000000] efi: mem69: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[    0.000000] efi: mem70: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x00000000ffc10000) (0MB)
[    0.000000] efi: mem71: type=11, attr=0x8000000000000000, range=[0x00000000ffc10000-0x00000000ffc20000) (0MB)
[    0.000000] efi: mem72: type=11, attr=0x8000000000000000, range=[0x00000000ffc20000-0x0000000100000000) (3MB)
[    0.000000] DMI 2.7 present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. Alex/G100          , BIOS Alex.03.61.0735.0056G3.0021 04/07/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x7f600 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 000000000 mask FC0000000 write-back
[    0.000000]   2 base 040000000 mask FC0000000 write-back
[    0.000000]   3 base 07F800000 mask FFF800000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Warning only 1919MB will be used.
[    0.000000] Use a HIGHMEM enabled kernel.
[    0.000000] initial memory mapped : 0 - 02000000
[    0.000000] Base memory trampoline at [8009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-0000000077f64000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0077e00000 page 2M
[    0.000000]  0077e00000 - 0077f64000 page 4k
[    0.000000] kernel direct mapping tables up to 77f64000 @ 1ffa000-2000000
[    0.000000] ACPI: RSDP 7f5f2014 00024 (v02 INTEL )
[    0.000000] ACPI: XSDT 7f5f2120 00074 (v01 INTEL  PineTrlM 00000001      01000013)
[    0.000000] ACPI: FACP 7f5f1000 000F4 (v04 INTEL  PineTrlM 00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT 7f5e8000 05E37 (v01 INTEL  PineTrlM 00000001 MSFT 01000013)
[    0.000000] ACPI: FACS 7f58f000 00040
[    0.000000] ACPI: HPET 7f5f0000 00038 (v01 INTEL  PineTrlM 00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 7f5ef000 00078 (v02 INTEL  PineTrlM 00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 7f5ee000 0003C (v01 INTEL  PineTrlM 00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 7f5e7000 00176 (v01 INTEL  PineTrlM 00000001 MSFT 01000013)
[    0.000000] ACPI: BOOT 7f5e6000 00028 (v01 INTEL  PineTrlM 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 7f5e5000 00655 (v01  PmRef    CpuPm 00003000 INTL 20100121)
[    0.000000] ACPI: SSDT 7f5e4000 00259 (v01  PmRef  Cpu0Tst 00003000 INTL 20100121)
[    0.000000] ACPI: SSDT 7f5e3000 0020F (v01  PmRef    ApTst 00003000 INTL 20100121)
[    0.000000] ACPI: WDAT 7f5e2000 00194 (v01 INSYDE INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1919MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 77f64000
[    0.000000]   low ram: 0 - 77f64000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00077f64
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000008f
[    0.000000]     0: 0x00000090 -> 0x000000a0
[    0.000000]     0: 0x00000100 -> 0x00000f00
[    0.000000]     0: 0x00001000 -> 0x0007f33f
[    0.000000]     0: 0x0007f5f3 -> 0x0007f600
[    0.000000] On node 0 totalpages: 490995
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3695 pages, LIFO batch:0
[    0.000000]   Normal zone: 3807 pages used for memmap
[    0.000000]   Normal zone: 483461 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] Allocating PCI resources starting at 7f600000 (gap: 7f600000:7f71c000)
[    0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f6f21000 s29760 r0 d23488 u53248
[    0.000000] pcpu-alloc: s29760 r0 d23488 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 487156
[    0.000000] Kernel command line: console= loglevel=7 init=/sbin/init cros_secure oops=panic panic=-1 root=PARTUUID=596d4c6b-b2b9-af40-985a-804ae7114aea/PARTNROFF=1 rootwait ro dm_verity.error_behavior=3 dm_verity.max_bios=-1 dm_verity.dev_wait=0 dm="1 vroot none ro 1,0 2097152 verity payload=ROOT_DEV hashtree=HASH_DEV hashstart=2097152 alg=sha1 root_hexdigest=4bdd5a1c362be77f66f5e977733b19c6c571580a salt=4f025fe32966bfc403d183a33b12e560fd60a5b2a4639cc5e41f8dec5ced8502" noinitrd cros_debug vt.global_cursor_default=0 kern_guid=596d4c6b-b2b9-af40-985a-804ae7114aea add_efi_memmap boot=local noresume noswap i915.modeset=1 tpm_tis.force=1 tpm_tis.interrupts=0 nmi_watchdog=panic,lapic drm.debug=0xe 
[    0.000000] device-mapper: init: will configure 1 devices
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Memory: 1934504k/1965456k available (3849k kernel code, 1777k data, 460k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff66000 - 0xfffff000   ( 612 kB)
[    0.000000]     vmalloc : 0xf8764000 - 0xfff64000   ( 120 MB)
[    0.000000]     lowmem  : 0x80000000 - 0xf7f64000   (1919 MB)
[    0.000000]       .init : 0x8157f000 - 0x815f2000   ( 460 kB)
[    0.000000]       .data : 0x813c2624 - 0x8157ed40   (1777 kB)
[    0.000000]       .text : 0x81000000 - 0x813c2624   (3849 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:712 16
[    0.000000] CPU 0 irqstacks, hard=f6808000 soft=f680a000
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] hpet clockevent registered
[    0.000000] Initial TSC value: 10862237290
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Initial usec timer 6535642
[    0.000000] Detected 1662.559 MHz processor.
[    0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.11 BogoMIPS (lpj=1662559)
[    0.001015] pid_max: default: 32768 minimum: 301
[    0.002055] Security Framework initialized
[    0.002063] Yama: becoming mindful.
[    0.002110] Mount-cache hash table entries: 512
[    0.002536] Initializing cgroup subsys freezer
[    0.002570] Disabled fast string operations
[    0.002578] CPU: Physical Processor ID: 0
[    0.002583] CPU: Processor Core ID: 0
[    0.002589] mce: CPU supports 5 MCE banks
[    0.002605] CPU0: Thermal monitoring enabled (TM2)
[    0.002613] using mwait in idle threads.
[    0.002689] ACPI: Core revision 20120320
[    0.015872] acpi_enable!
[    0.016007] ACPI mode enable smi_command = 0xb2 val = 0xa0
[    0.016030] ftrace: allocating 19574 entries in 39 pages
[    0.031112] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.032487] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.042503] CPU0: Intel(R) Atom(TM) CPU N570   @ 1.66GHz stepping 0a
[    0.042996] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
[    0.042996] ... version:                3
[    0.042996] ... bit width:              40
[    0.042996] ... generic registers:      2
[    0.042996] ... value mask:             000000ffffffffff
[    0.042996] ... max period:             000000007fffffff
[    0.042996] ... fixed-purpose events:   3
[    0.042996] ... event mask:             0000000700000003
[    0.042996] NMI watchdog: enabled, takes one hw-pmu counter.
[    0.042996] CPU 1 irqstacks, hard=f68f0000 soft=f68f2000
[    0.042996] Booting Node   0, Processors  #1
[    0.001999] Initializing CPU#1
[    0.001999] Disabled fast string operations
[    0.055031] NMI watchdog: enabled, takes one hw-pmu counter.
[    0.055275] CPU 2 irqstacks, hard=f68fe000 soft=f6900000
[    0.055281]  #2
[    0.001999] Initializing CPU#2
[    0.001999] Disabled fast string operations
[    0.066993] TSC synchronization [CPU#0 -> CPU#2]:
[    0.066993] Measured 80 cycles TSC warp between CPUs, turning off TSC clock.
[    0.066993] Marking TSC unstable due to check_tsc_sync_source failed
[    0.067038] NMI watchdog: enabled, takes one hw-pmu counter.
[    0.067255] CPU 3 irqstacks, hard=f690c000 soft=f690e000
[    0.067260]  #3 Ok.
[    0.001999] Initializing CPU#3
[    0.001999] Disabled fast string operations
[    0.078861] NMI watchdog: enabled, takes one hw-pmu counter.
[    0.078924] Brought up 4 CPUs
[    0.078931] Total of 4 processors activated (13300.47 BogoMIPS).
[    0.081007] devtmpfs: initialized
[    0.082359] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[    0.082368] PM: Registering ACPI NVS region [mem 0x7f4bf000-0x7f5befff] (1048576 bytes)
[    0.084944] RTC time: 23:20:41, date: 06/24/13
[    0.085064] NET: Registered protocol family 16
[    0.086207] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.086215] ACPI: bus type pci registered
[    0.086341] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.086350] PCI: not using MMCONFIG
[    0.086678] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[    0.086686] PCI: PCI BIOS revision 3.00 entry at 0xef753, last bus=1
[    0.086691] PCI: Using configuration type 1 for base access
[    0.090511] bio: create slab <bio-0> at 0
[    0.091116] ACPI: Added _OSI(Module Device)
[    0.091122] ACPI: Added _OSI(Processor Device)
[    0.091128] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.091134] ACPI: Added _OSI(Processor Aggregator Device)
[    0.094935] ACPI: EC: Look up EC in DSDT
[    0.098829] ACPI: Executed 1 blocks of module-level executable AML code
[    0.101753] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.102807] ACPI: SSDT 7f494818 00789 (v01  PmRef  Cpu0Ist 00003000 INTL 20100121)
[    0.104246] ACPI: Dynamic OEM Table Load:
[    0.104255] ACPI: SSDT   (null) 00789 (v01  PmRef  Cpu0Ist 00003000 INTL 20100121)
[    0.104549] ACPI: SSDT 7f493c18 001C3 (v02  PmRef  Cpu0Cst 00003001 INTL 20100121)
[    0.105479] ACPI: Dynamic OEM Table Load:
[    0.105487] ACPI: SSDT   (null) 001C3 (v02  PmRef  Cpu0Cst 00003001 INTL 20100121)
[    0.111734] ACPI: SSDT 7f493e18 001B5 (v01  PmRef    ApIst 00003000 INTL 20100121)
[    0.112754] ACPI: Dynamic OEM Table Load:
[    0.112763] ACPI: SSDT   (null) 001B5 (v01  PmRef    ApIst 00003000 INTL 20100121)
[    0.115280] ACPI: SSDT 7f492f18 000C9 (v02  PmRef    ApCst 00003000 INTL 20100121)
[    0.116244] ACPI: Dynamic OEM Table Load:
[    0.116253] ACPI: SSDT   (null) 000C9 (v02  PmRef    ApCst 00003000 INTL 20100121)
[    0.123172] ACPI: Interpreter enabled
[    0.123195] ACPI: (supports S0 S3 S5)
[    0.123248] ACPI: Using IOAPIC for interrupt routing
[    0.123301] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.124024] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.124031] PCI: Using MMCONFIG for extended config space
[    0.142070] ACPI: Power Resource [FN00] (off)
[    0.145034] ACPI: Power Resource [FN01] (off)
[    0.147073] ACPI: Power Resource [FN02] (on)
[    0.150073] ACPI: Power Resource [FN03] (on)
[    0.153032] ACPI: Power Resource [FN04] (on)
[    0.180771] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    0.181260] ACPI: No dock devices found.
[    0.181274] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.182318] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.183944] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.183953] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.183960] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.183970] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[    0.184077] PCI host bridge to bus 0000:00
[    0.184085] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.184092] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.184099] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.184107] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[    0.184134] pci 0000:00:00.0: [8086:a010] type 00 class 0x060000
[    0.184206] pci 0000:00:02.0: [8086:a011] type 00 class 0x030000
[    0.184225] pci 0000:00:02.0: reg 10: [mem 0x92180000-0x921fffff]
[    0.184237] pci 0000:00:02.0: reg 14: [io  0x20c0-0x20c7]
[    0.184249] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff pref]
[    0.184261] pci 0000:00:02.0: reg 1c: [mem 0x92000000-0x920fffff]
[    0.184322] pci 0000:00:02.1: [8086:a012] type 00 class 0x038000
[    0.184338] pci 0000:00:02.1: reg 10: [mem 0x92100000-0x9217ffff]
[    0.184480] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.184511] pci 0000:00:1b.0: reg 10: [mem 0x92200000-0x92203fff 64bit]
[    0.184634] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.184678] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.184813] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.184873] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.184955] pci 0000:00:1d.0: reg 20: [io  0x2080-0x209f]
[    0.185042] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.185128] pci 0000:00:1d.1: reg 20: [io  0x2060-0x207f]
[    0.185200] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.185283] pci 0000:00:1d.2: reg 20: [io  0x2040-0x205f]
[    0.185355] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.185438] pci 0000:00:1d.3: reg 20: [io  0x2020-0x203f]
[    0.185523] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.186673] pci 0000:00:1d.7: reg 10: [mem 0x92205000-0x922053ff]
[    0.195054] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.195098] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.195217] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[    0.195407] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[    0.195439] pci 0000:00:1f.2: reg 10: [io  0x20b8-0x20bf]
[    0.195458] pci 0000:00:1f.2: reg 14: [io  0x20cc-0x20cf]
[    0.195476] pci 0000:00:1f.2: reg 18: [io  0x20b0-0x20b7]
[    0.195493] pci 0000:00:1f.2: reg 1c: [io  0x20c8-0x20cb]
[    0.195511] pci 0000:00:1f.2: reg 20: [io  0x20a0-0x20af]
[    0.195529] pci 0000:00:1f.2: reg 24: [mem 0x92204000-0x922043ff]
[    0.195598] pci 0000:00:1f.2: PME# supported from D3hot
[    0.195633] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.195713] pci 0000:00:1f.3: reg 20: [io  0x2000-0x201f]
[    0.195866] pci 0000:01:00.0: [168c:0030] type 00 class 0x028000
[    0.195904] pci 0000:01:00.0: reg 10: [mem 0x91000000-0x9101ffff 64bit]
[    0.196055] pci 0000:01:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[    0.196137] pci 0000:01:00.0: supports D1
[    0.196143] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[    0.199022] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.199038] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.199060] pci 0000:00:1c.0:   bridge window [mem 0x91000000-0x91ffffff]
[    0.199074] pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[    0.199185] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[    0.199207] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.199215] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.199222] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.199230] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[    0.199254] pci_bus 0000:00: on NUMA node 0
[    0.199264] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.199576] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[    0.199781] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[    0.200171]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.200663]  pci0000:00: ACPI _OSC control (0x1c) granted
[    0.208735] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.208897] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[    0.209077] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.209236] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.209394] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.209555] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.209715] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.209875] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.210246] SCSI subsystem initialized
[    0.211065] libata version 3.00 loaded.
[    0.211229] usbcore: registered new interface driver usbfs
[    0.211270] usbcore: registered new interface driver hub
[    0.211290] usbcore: registered new device driver usb
[    0.211290] chromeos_acpi: registering CHSW 0
[    0.211924] chromeos_acpi: registering VBNV 0
[    0.211933] chromeos_acpi: registering VBNV 1
[    0.215999] chromeos_acpi: truncating buffer from 3750 to 1336
[    0.216591] chromeos_acpi: installed
[    0.216595] chromeos_acpi: chromeos_acpi: enabling S3 USB wake
[    0.216607] chromeos_acpi: chromeos_acpi: failed to enable S3 USB wake
[    0.216692] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.216698] PCI: Using ACPI for IRQ routing
[    0.216707] PCI: pci_cache_line_size set to 64 bytes
[    0.216815] reserve RAM buffer: 000000000008f000 - 000000000008ffff 
[    0.216823] reserve RAM buffer: 000000007f33f000 - 000000007fffffff 
[    0.216831] reserve RAM buffer: 000000007f600000 - 000000007fffffff 
[    0.217510] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.217523] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.217535] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.222049] Switching to clocksource hpet
[    0.241624] pnp: PnP ACPI init
[    0.241660] ACPI: bus type pnp registered
[    0.244371] pnp 00:00: [bus 00-ff]
[    0.244386] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.244398] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.244409] pnp 00:00: [io  0x0d00-0xffff window]
[    0.244420] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.244432] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.244443] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.244454] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.244466] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.244477] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.244488] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.244499] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.244511] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.244522] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.244533] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.244544] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.244556] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.244567] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.244579] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[    0.244809] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.245412] pnp 00:01: [io  0x164e-0x164f]
[    0.245424] pnp 00:01: [io  0x0061]
[    0.245434] pnp 00:01: [io  0x0070]
[    0.245443] pnp 00:01: [io  0x0080]
[    0.245452] pnp 00:01: [io  0x0092]
[    0.245462] pnp 00:01: [io  0x00b2-0x00b3]
[    0.245472] pnp 00:01: [io  0x0063]
[    0.245481] pnp 00:01: [io  0x0065]
[    0.245490] pnp 00:01: [io  0x0067]
[    0.245500] pnp 00:01: [io  0x0600-0x060f]
[    0.245509] pnp 00:01: [io  0x0610]
[    0.245519] pnp 00:01: [io  0x0800-0x080f]
[    0.245529] pnp 00:01: [io  0x0810-0x0817]
[    0.245538] pnp 00:01: [io  0x0a00-0x0a01]
[    0.245548] pnp 00:01: [io  0x0400-0x047f]
[    0.245558] pnp 00:01: [io  0x0500-0x053f]
[    0.245574] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.245585] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[    0.245595] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[    0.245606] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[    0.245616] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[    0.245627] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[    0.245638] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[    0.245687] pnp 00:01: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.0 BAR 7 [io  0x1000-0x1fff]
[    0.245883] system 00:01: [io  0x0600-0x060f] has been reserved
[    0.245897] system 00:01: [io  0x0610] has been reserved
[    0.245910] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.245923] system 00:01: [io  0x0810-0x0817] has been reserved
[    0.245936] system 00:01: [io  0x0a00-0x0a01] has been reserved
[    0.245949] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.245962] system 00:01: [io  0x0500-0x053f] has been reserved
[    0.245978] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.245992] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.246035] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.246049] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.246063] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.246077] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.246091] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.246113] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.246167] pnp 00:02: [io  0x0000-0x001f]
[    0.246178] pnp 00:02: [io  0x0081-0x0091]
[    0.246188] pnp 00:02: [io  0x0093-0x009f]
[    0.246198] pnp 00:02: [io  0x00c0-0x00df]
[    0.246208] pnp 00:02: [dma 4]
[    0.246324] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.246432] pnp 00:03: [io  0x0070-0x0077]
[    0.246555] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.246835] pnp 00:04: [irq 0 disabled]
[    0.246864] pnp 00:04: [irq 8]
[    0.246876] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    0.246996] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.247081] pnp 00:05: [io  0x00f0]
[    0.247103] pnp 00:05: [irq 13]
[    0.247223] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.247280] pnp 00:06: [mem 0xff800000-0xffffffff]
[    0.247399] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
[    0.248728] pnp 00:07: [io  0x0060]
[    0.248736] pnp 00:07: [io  0x0064]
[    0.248755] pnp 00:07: [irq 1]
[    0.248865] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.248919] pnp 00:08: [irq 12]
[    0.248996] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.249286] pnp: PnP ACPI: found 9 devices
[    0.249292] ACPI: ACPI bus type pnp unregistered
[    0.293566] pci 0000:01:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[    0.293617] pci 0000:01:00.0: BAR 6: assigned [mem 0x90000000-0x9000ffff pref]
[    0.293626] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.293635] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.293647] pci 0000:00:1c.0:   bridge window [mem 0x91000000-0x91ffffff]
[    0.293658] pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[    0.293672] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[    0.293736] pci 0000:00:1e.0: setting latency timer to 64
[    0.293746] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.293753] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.293760] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.293767] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[    0.293774] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.293781] pci_bus 0000:01: resource 1 [mem 0x91000000-0x91ffffff]
[    0.293789] pci_bus 0000:01: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
[    0.293796] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
[    0.293803] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
[    0.293810] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[    0.293817] pci_bus 0000:02: resource 7 [mem 0x80000000-0xfebfffff]
[    0.293918] NET: Registered protocol family 2
[    0.294054] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.294580] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.296437] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
[    0.297601] TCP: Hash tables configured (established 262144 bind 65536)
[    0.297610] TCP: reno registered
[    0.297629] UDP hash table entries: 1024 (order: 3, 49152 bytes)
[    0.297680] UDP-Lite hash table entries: 1024 (order: 3, 49152 bytes)
[    0.297909] NET: Registered protocol family 1
[    0.297947] pci 0000:00:02.0: Boot video device
[    0.309120] PCI: CLS 64 bytes, default 64
[    0.309648] Simple Boot Flag at 0x44 set to 0x80
[    0.311578] microcode: CPU0 sig=0x106ca, pf=0x10, revision=0x107
[    0.311596] microcode: CPU1 sig=0x106ca, pf=0x10, revision=0x107
[    0.311624] microcode: CPU2 sig=0x106ca, pf=0x10, revision=0x107
[    0.311649] microcode: CPU3 sig=0x106ca, pf=0x10, revision=0x107
[    0.311774] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[    0.317870] msgmni has been set to 3778
[    0.319219] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.319227] io scheduler noop registered
[    0.319232] io scheduler deadline registered
[    0.319311] io scheduler cfq registered (default)
[    0.319549] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.319801] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.319808] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.319819] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.319864] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.319927] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.322625] ACPI: AC Adapter [AC] (on-line)
[    0.322896] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.322909] ACPI: Power Button [PWRB]
[    0.323089] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    0.323100] ACPI: Sleep Button [SLPB]
[    0.323244] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    0.329134] ACPI: Lid Switch [LID0]
[    0.329329] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.329340] ACPI: Power Button [PWRF]
[    0.333126] ACPI: Fan [FAN0] (off)
[    0.335739] ACPI: Fan [FAN1] (off)
[    0.339644] ACPI: Fan [FAN2] (on)
[    0.342360] ACPI: Fan [FAN3] (on)
[    0.344958] ACPI: Fan [FAN4] (on)
[    0.345145] ACPI: Requesting acpi_cpufreq
[    0.349742] ACPI: acpi_idle registered with cpuidle
[    0.371120] thermal LNXTHERM:00: registered as thermal_zone0
[    0.371128] ACPI: Thermal Zone [THRM] (61 C)
[    0.371862] Non-volatile memory driver v1.3
[    0.371996] Linux agpgart interface v0.103
[    0.372136] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[    0.372467] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    0.372882] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    0.373249] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[    0.373677] tpm_tis tpm_tis: 1.2 TPM (device-id 0xB, rev-id 16)
[    0.384480] ACPI: Battery Slot [BAT1] (battery present)
[    0.519741] console [pstore-1] enabled
[    0.519818] [drm] Initialized drm 1.1.0 20060810
[    0.520666] i915 0000:00:02.0: setting latency timer to 64
[    0.594637] [drm:intel_opregion_setup], graphic opregion physical addr: 0x7f58c018
[    0.594693] [drm:intel_opregion_setup], Public ACPI methods supported
[    0.594704] [drm:intel_opregion_setup], SWSCI supported
[    0.594714] [drm:intel_opregion_setup], ASLE supported
[    0.594794] i915 0000:00:02.0: irq 41 for MSI/MSI-X
[    0.594828] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    0.594844] [drm] Driver supports precise vblank timestamp query.
[    0.594871] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT PINEVIEW       d
[    0.594884] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 100 display_clock_mode 0
[    0.594901] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
[    0.594917] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[    0.594928] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x800" 0 70700 1280 1296 1344 1440 800 801 804 818 0x8 0xa
[    0.594953] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[    0.594965] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[    0.594986] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[    0.595043] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[    0.595088] [drm:intel_modeset_init], 2 display pipes available.
[    0.595115] [drm:intel_crtc_init], swapping pipes & planes for FBC
[    0.646091] [drm:intel_wait_for_vblank], vblank wait timed out
[    0.646106] [drm:intel_modeset_init], plane 0 init failed: -19
[    0.646129] [drm:intel_crtc_init], swapping pipes & planes for FBC
[    0.646141] [drm:intel_modeset_init], plane 1 init failed: -19
[    0.659580] [drm] Adding LVDS downclock mode
[    0.659597] [drm:intel_find_lvds_downclock], LVDS downclock is found in EDID. Normal clock 70700Khz, downclock 56428Khz
[    0.659716] [drm:intel_panel_get_backlight], get backlight PWM = 13046
[    0.659730] [drm:intel_panel_get_max_backlight], max backlight PWM = 13046
[    0.659819] [drm:intel_panel_get_backlight], get backlight PWM = 13046
[    0.659935] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[    0.911170] [drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe A
[    0.911186] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
[    0.911200] [drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe A
[    0.911217] [drm:intel_update_fbc], 
[    0.911229] [drm:pineview_update_wm], Self-refresh is disabled
[    0.911244] [drm:i915_get_vblank_timestamp], crtc 1 is disabled
[    0.926267] [drm:intel_update_fbc], 
[    0.926278] [drm:pineview_update_wm], Self-refresh is disabled
[    0.937654] [drm:init_status_page], render ring hws offset: 0x00000000
[    0.938082] [drm] initialized overlay support
[    0.938176] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[    0.938202] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[    0.938232] [drm] Adding LVDS downclock mode
[    0.938251] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[    0.938265] [drm:drm_mode_debug_printmodeline], Modeline 14:"1280x800" 60 70700 1280 1296 1344 1440 800 801 804 818 0x48 0xa
[    0.938287] [drm:drm_mode_debug_printmodeline], Modeline 15:"1280x800" 48 56428 1280 1296 1344 1440 800 801 804 818 0x40 0xa
[    0.938309] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[    0.950987] [drm:intel_crt_detect], CRT detected via hotplug
[    0.964396] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[    0.964432] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes :
[    0.964445] [drm:drm_mode_debug_printmodeline], Modeline 9:"2048x1280" 60 174250 2048 2096 2128 2208 1280 1283 1289 1317 0x48 0x9
[    0.964467] [drm:drm_mode_debug_printmodeline], Modeline 21:"2048x1152" 60 198022 2048 2184 2408 2768 1152 1153 1156 1192 0x0 0x6
[    0.964488] [drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6
[    0.964509] [drm:drm_mode_debug_printmodeline], Modeline 19:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[    0.964530] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[    0.964551] [drm:drm_mode_debug_printmodeline], Modeline 18:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[    0.964572] [drm:drm_mode_debug_printmodeline], Modeline 17:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[    0.964592] [drm:drm_mode_debug_printmodeline], Modeline 16:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[    0.964613] [drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[    0.964634] [drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    0.964654] [drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[    0.964675] [drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[    0.964695] [drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[    0.964715] [drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[    0.964735] [drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[    0.964755] [drm:drm_setup_crtcs], 
[    0.964766] [drm:drm_enable_connectors], connector 5 enabled? yes
[    0.964777] [drm:drm_enable_connectors], connector 12 enabled? yes
[    0.964788] [drm:drm_target_preferred], looking for cmdline mode on connector 5
[    0.964800] [drm:drm_target_preferred], looking for preferred mode on connector 5
[    0.964812] [drm:drm_target_preferred], found mode 1280x800
[    0.964822] [drm:drm_target_preferred], looking for cmdline mode on connector 12
[    0.964833] [drm:drm_target_preferred], looking for preferred mode on connector 12
[    0.964845] [drm:drm_target_preferred], found mode 2048x1280
[    0.964855] [drm:drm_setup_crtcs], picking CRTCs for 4096x4096 config
[    0.964870] [drm:drm_setup_crtcs], desired mode 1280x800 set on crtc 4
[    0.964884] [drm:drm_setup_crtcs], desired mode 2048x1280 set on crtc 3
[    1.000419] [drm:intelfb_create], allocated 2048x1280 fb: 0x00030000, bo f69cca00
[    1.000681] fbcon: inteldrmfb (fb0) is primary device
[    1.000831] [drm:drm_crtc_helper_set_config], 
[    1.000840] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0)
[    1.000863] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[    1.000873] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[    1.000882] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    1.000897] [drm:drm_mode_debug_printmodeline], Modeline 31:"2048x1280" 60 174250 2048 2096 2128 2208 1280 1283 1289 1317 0x48 0x9
[    1.000917] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[    1.000926] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[    1.000936] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:3]
[    1.000948] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[    1.000957] [drm:drm_mode_debug_printmodeline], Modeline 31:"2048x1280" 60 174250 2048 2096 2128 2208 1280 1283 1289 1317 0x48 0x9
[    1.000985] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[    1.000997] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[    1.002855] [drm:i9xx_crtc_mode_set], Mode for pipe A:
[    1.002864] [drm:drm_mode_debug_printmodeline], Modeline 31:"2048x1280" 60 174250 2048 2096 2128 2208 1280 1283 1289 1317 0x48 0x9
[    1.036659] [drm:i9xx_update_plane], Writing base 00030000 00000000 0 0 8192
[    1.036674] [drm:intel_update_fbc], 
[    1.036685] [drm:intel_calculate_wm], FIFO entries required for mode: 71
[    1.036694] [drm:intel_calculate_wm], FIFO watermark level: 431
[    1.036704] [drm:pineview_update_wm], DSPFW1 register is d7830f0f
[    1.036712] [drm:intel_calculate_wm], FIFO entries required for mode: 77
[    1.036721] [drm:intel_calculate_wm], FIFO watermark level: 430
[    1.036730] [drm:intel_calculate_wm], FIFO entries required for mode: 397
[    1.036739] [drm:intel_calculate_wm], FIFO watermark level: 105
[    1.036748] [drm:intel_calculate_wm], FIFO entries required for mode: 403
[    1.036757] [drm:intel_calculate_wm], FIFO watermark level: 104
[    1.036766] [drm:pineview_update_wm], DSPFW3 register is 3f3f0069
[    1.036775] [drm:pineview_update_wm], Self-refresh is enabled
[    1.036786] [drm:drm_crtc_helper_set_mode], [ENCODER:13:DAC-13] set [MODE:31:2048x1280]
[    1.036799] [drm:intel_calculate_wm], FIFO entries required for mode: 71
[    1.036808] [drm:intel_calculate_wm], FIFO watermark level: 431
[    1.036817] [drm:pineview_update_wm], DSPFW1 register is d7830f0f
[    1.036826] [drm:intel_calculate_wm], FIFO entries required for mode: 77
[    1.036834] [drm:intel_calculate_wm], FIFO watermark level: 430
[    1.036844] [drm:intel_calculate_wm], FIFO entries required for mode: 397
[    1.036852] [drm:intel_calculate_wm], FIFO watermark level: 105
[    1.036862] [drm:intel_calculate_wm], FIFO entries required for mode: 403
[    1.036870] [drm:intel_calculate_wm], FIFO watermark level: 104
[    1.036879] [drm:pineview_update_wm], DSPFW3 register is 7f3f0069
[    1.036888] [drm:pineview_update_wm], Self-refresh is enabled
[    1.037435] [drm:intel_update_fbc], 
[    1.037448] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[    1.037458] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:12:VGA-1] set DPMS on
[    1.037469] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[    1.037485] [drm:drm_crtc_helper_set_config], 
[    1.037492] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0)
[    1.037513] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[    1.037522] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[    1.037531] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    1.037545] [drm:drm_mode_debug_printmodeline], Modeline 30:"1280x800" 60 70700 1280 1296 1344 1440 800 801 804 818 0x48 0xa
[    1.037564] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[    1.037573] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[    1.037583] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    1.037594] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:3]
[    1.037605] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[    1.037613] [drm:drm_mode_debug_printmodeline], Modeline 30:"1280x800" 60 70700 1280 1296 1344 1440 800 801 804 818 0x48 0xa
[    1.037638] [drm:drm_crtc_helper_set_mode], [CRTC:4]
[    1.037647] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[    1.041309] [drm:i9xx_crtc_mode_set], Mode for pipe B:
[    1.041318] [drm:drm_mode_debug_printmodeline], Modeline 30:"1280x800" 60 70700 1280 1296 1344 1440 800 801 804 818 0x48 0xa
[    1.075115] [drm:i9xx_update_plane], Writing base 00030000 00000000 0 0 8192
[    1.075130] [drm:intel_update_fbc], 
[    1.075141] [drm:pineview_update_wm], Self-refresh is disabled
[    1.075152] [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:30:1280x800]
[    1.075164] [drm:pineview_update_wm], Self-refresh is disabled
[    1.075722] [drm:intel_update_fbc], 
[    1.075730] [drm:intel_lvds_enable], applying panel-fitter: 8, 0
[    1.368024] [drm:intel_panel_actually_set_backlight], set backlight PWM = 13046
[    1.368041] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[    1.368051] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:5:LVDS-1] set DPMS on
[    1.368203] [drm:drm_crtc_helper_set_config], 
[    1.368210] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0)
[    1.368235] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    1.368247] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:3]
[    1.368258] [drm:drm_crtc_helper_set_config], 
[    1.368265] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0)
[    1.368287] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    1.368299] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:3]
[    1.389035] Console: switching to colour frame buffer device 160x50
[    1.389053] [drm:drm_crtc_helper_set_config], 
[    1.389060] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0)
[    1.389084] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    1.389096] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:3]
[    1.389107] [drm:drm_crtc_helper_set_config], 
[    1.389114] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0)
[    1.389135] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    1.389147] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:3]
[    1.409971] fb0: inteldrmfb frame buffer device
[    1.409978] drm: registered panic notifier
[    1.413670] [drm:i915_driver_irq_handler], pipe A underrun
[    1.413691] [drm:intel_panel_get_max_backlight], max backlight PWM = 13046
[    1.413705] [drm:intel_panel_actually_set_backlight], set backlight PWM = 13046
[    1.414088] [drm:intel_panel_get_max_backlight], max backlight PWM = 13046
[    1.414106] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7827
[    1.414374] acpi device:2c: registered as cooling_device9
[    1.415060] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    1.415092] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[    1.415168] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    1.418613] loop: module loaded
[    1.418825] ahci 0000:00:1f.2: version 3.0
[    1.418981] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    1.419127] ahci: SSS flag set, parallel bus scan disabled
[    1.419194] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[    1.419217] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part 
[    1.419239] ahci 0000:00:1f.2: setting latency timer to 64
[    1.420934] scsi0 : ahci
[    1.421314] scsi1 : ahci
[    1.421625] scsi2 : ahci
[    1.421935] scsi3 : ahci
[    1.422775] ata1: SATA max UDMA/133 abar m1024 at 0x92204000 port 0x92204100 irq 42
[    1.422794] ata2: DUMMY
[    1.422804] ata3: DUMMY
[    1.422813] ata4: DUMMY
[    1.423451] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.423564] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.423578] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.423827] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.423897] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    1.423930] ehci_hcd 0000:00:1d.7: debug port 1
[    1.427835] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    1.427900] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x92205000
[    1.433051] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.433159] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.433177] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.433194] usb usb1: Product: EHCI Host Controller
[    1.433208] usb usb1: Manufacturer: Linux 3.4.0 ehci_hcd
[    1.433222] usb usb1: SerialNumber: 0000:00:1d.7
[    1.433648] hub 1-0:1.0: USB hub found
[    1.433673] hub 1-0:1.0: 8 ports detected
[    1.433968] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.434084] uhci_hcd: USB Universal Host Controller Interface driver
[    1.434179] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.434193] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.434399] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.434466] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00002080
[    1.434605] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.434623] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.434640] usb usb2: Product: UHCI Host Controller
[    1.434654] usb usb2: Manufacturer: Linux 3.4.0 uhci_hcd
[    1.434667] usb usb2: SerialNumber: 0000:00:1d.0
[    1.435089] hub 2-0:1.0: USB hub found
[    1.435113] hub 2-0:1.0: 2 ports detected
[    1.435363] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.435377] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.435574] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.435671] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00002060
[    1.435807] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.435825] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.435842] usb usb3: Product: UHCI Host Controller
[    1.435855] usb usb3: Manufacturer: Linux 3.4.0 uhci_hcd
[    1.435869] usb usb3: SerialNumber: 0000:00:1d.1
[    1.436309] hub 3-0:1.0: USB hub found
[    1.436333] hub 3-0:1.0: 2 ports detected
[    1.436584] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.436598] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.436811] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.436916] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
[    1.437089] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.437108] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.437125] usb usb4: Product: UHCI Host Controller
[    1.437138] usb usb4: Manufacturer: Linux 3.4.0 uhci_hcd
[    1.437152] usb usb4: SerialNumber: 0000:00:1d.2
[    1.437537] hub 4-0:1.0: USB hub found
[    1.437561] hub 4-0:1.0: 2 ports detected
[    1.437817] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.437831] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.438062] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.438163] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00002020
[    1.438300] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.438318] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.438335] usb usb5: Product: UHCI Host Controller
[    1.438348] usb usb5: Manufacturer: Linux 3.4.0 uhci_hcd
[    1.438362] usb usb5: SerialNumber: 0000:00:1d.3
[    1.438751] hub 5-0:1.0: USB hub found
[    1.438775] hub 5-0:1.0: 2 ports detected
[    1.439208] usbcore: registered new interface driver cdc_acm
[    1.439222] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.439238] Initializing USB Mass Storage driver...
[    1.439372] usbcore: registered new interface driver usb-storage
[    1.439386] USB Mass Storage support registered.
[    1.439519] usbcore: registered new interface driver libusual
[    1.439579] usbcore: registered new interface driver ums-realtek
[    1.439698] usbcore: registered new interface driver usbserial
[    1.439757] usbcore: registered new interface driver usbserial_generic
[    1.439801] USB Serial support registered for generic
[    1.439819] usbserial: USB Serial Driver core
[    1.439983] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    1.451272] i8042: Detected active multiplexing controller, rev 1.1
[    1.457439] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.457464] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.457561] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.457630] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.457696] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.459063] rtc_cmos 00:03: RTC can wake from S4
[    1.459344] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.459410] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.459731] coretemp coretemp.0: Using relative temperature scale!
[    1.459777] coretemp coretemp.0: Using relative temperature scale!
[    1.460142] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel at redhat.com
[    1.460331] device-mapper: verity-chromeos: dm-verity-chromeos registered
[    1.460343] device-mapper: bootcache: version 0.1.0 loaded
[    1.460585] cpuidle: using governor ladder
[    1.460804] cpuidle: using governor menu
[    1.460960] usbcore: registered new interface driver usbhid
[    1.460969] usbhid: USB HID core driver
[    1.462230] Netfilter messages via NETLINK v0.30.
[    1.462276] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    1.462567] ctnetlink v0.93: registering with nfnetlink.
[    1.462829] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.462897] TCP: cubic registered
[    1.462904] Initializing XFRM netlink socket
[    1.463237] NET: Registered protocol family 10
[    1.463662] NET: Registered protocol family 17
[    1.464152] Using IPI No-Shortcut mode
[    1.465250]   Magic number: 1:516:353
[    1.467452] ALSA device list:
[    1.467462]   No soundcards found.
[    1.467501] Warning: unable to open an initial console.
[    1.478296] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    1.479688] atkbd serio1: GETID failed
[    1.480978] atkbd serio1: atkbd: SETLEDS failed
[    1.480995] atkbd serio1: probe failed
[    1.481919] atkbd serio2: GETID failed
[    1.482882] atkbd serio2: atkbd: SETLEDS failed
[    1.482901] atkbd serio2: probe failed
[    1.483868] atkbd serio3: GETID failed
[    1.485047] atkbd serio3: atkbd: SETLEDS failed
[    1.485057] atkbd serio3: probe failed
[    1.490452] atkbd serio4: bad keyboard id 0
[    1.490467] atkbd serio4: probe failed
[    1.491393] psmouse serio1: GETID probe failed, retrying...
[    1.494192] psmouse serio2: GETID probe failed, retrying...
[    1.497213] psmouse serio3: GETID probe failed, retrying...
[    1.533141] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.534311] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.534809] ata1.00: ATA-8: SanDisk SSD P4 16GB, SSD 8.13, max UDMA/133
[    1.534823] ata1.00: 31277232 sectors, multi 1: LBA48 
[    1.535797] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.535932] ata1.00: configured for UDMA/133
[    1.536457] scsi 0:0:0:0: Direct-Access     ATA      SanDisk SSD P4 1 SSD  PQ: 0 ANSI: 5
[    1.537055] sd 0:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    1.537501] sd 0:0:0:0: [sda] Write Protect is off
[    1.537520] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.537646] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.543685]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12
[    1.547111] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.547170] device-mapper: init: attempting early device configuration.
[    1.547847] device-mapper: init: adding target '0 2097152 verity payload=ROOT_DEV hashtree=HASH_DEV hashstart=2097152 alg=sha1 root_hexdigest=4bdd5a1c362be77f66f5e977733b19c6c571580a salt=4f025fe32966bfc403d183a33b12e560fd60a5b2a4639cc5e41f8dec5ced8502'
[    1.547884] device-mapper: verity: Argument 0: 'payload=ROOT_DEV'
[    1.547895] device-mapper: verity: Argument 1: 'hashtree=HASH_DEV'
[    1.547905] device-mapper: verity: Argument 2: 'hashstart=2097152'
[    1.547916] device-mapper: verity: Argument 3: 'alg=sha1'
[    1.547925] device-mapper: verity: Argument 4: 'root_hexdigest=4bdd5a1c362be77f66f5e977733b19c6c571580a'
[    1.547938] device-mapper: verity: Argument 5: 'salt=4f025fe32966bfc403d183a33b12e560fd60a5b2a4639cc5e41f8dec5ced8502'
[    1.735120] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.738079] [drm:intel_decrease_pllclock], downclocking LVDS
[    1.776090] [drm:intel_decrease_pllclock], downclocking LVDS
[    1.851140] usb 1-1: New USB device found, idVendor=13fe, idProduct=5200
[    1.851160] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.851178] usb 1-1: Product: Patriot Memory
[    1.851191] usb 1-1: Manufacturer:         
[    1.851203] usb 1-1: SerialNumber: 07013492D5655B43
[    1.852151] scsi4 : usb-storage 1-1:1.0
[    1.954130] usb 1-2: new high-speed USB device number 3 using ehci_hcd
[    2.048080] device-mapper: table: 254:0: verity: Data device lookup failed
[    2.048100] device-mapper: init: starting dm-0 (vroot) failed
[    2.048832] EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities
[    2.054648] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[    2.058443] EXT4-fs (sda3): mounted filesystem without journal. Opts: (null)
[    2.058493] VFS: Mounted root (ext2 filesystem) readonly on device 8:3.
[    2.061734] devtmpfs: mounted
[    2.061983] Freeing unused kernel memory: 460k freed
[    2.062717] Write protecting the kernel text: 3852k
[    2.063284] Write protecting the kernel read-only data: 1444k
[    2.063301] NX-protecting the kernel data: 2292k
[    2.070053] usb 1-2: config 1 has an invalid interface number: 1 but max is 0
[    2.070077] usb 1-2: config 1 has no interface number 0
[    2.071886] usb 1-2: New USB device found, idVendor=05c6, idProduct=9244
[    2.071912] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[    2.071923] usb 1-2: Product: Qualcomm Gobi 2000
[    2.071932] usb 1-2: Manufacturer: Qualcomm Incorporated
[    2.176148] usb 1-4: new high-speed USB device number 4 using ehci_hcd
[    2.254447] udevd[80]: starting version 171
[    2.290520] usb 1-4: New USB device found, idVendor=0409, idProduct=005a
[    2.290536] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.291088] hub 1-4:1.0: USB hub found
[    2.291242] hub 1-4:1.0: 4 ports detected
[    2.323157] [drm:intel_panel_actually_set_backlight], set backlight PWM = 5218
[    2.338561] [drm:i915_driver_open], 
[    2.338624] [drm:drm_crtc_helper_set_config], 
[    2.338633] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0)
[    2.338661] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    2.338673] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:3]
[    2.338685] [drm:drm_crtc_helper_set_config], 
[    2.338693] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0)
[    2.338717] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    2.338729] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:3]
[    2.338777] [drm:i915_driver_open], 
[    2.338807] [drm:drm_crtc_helper_set_config], 
[    2.338815] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0)
[    2.338838] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    2.338849] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:3]
[    2.338861] [drm:drm_crtc_helper_set_config], 
[    2.338869] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0)
[    2.338892] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    2.338904] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:3]
[    2.338945] [drm:i915_driver_open], 
[    2.338993] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
[    2.339123] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
[    2.339154] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    2.339163] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[    2.339188] [drm] Adding LVDS downclock mode
[    2.339204] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[    2.339213] [drm:drm_mode_debug_printmodeline], Modeline 14:"1280x800" 60 70700 1280 1296 1344 1440 800 801 804 818 0x48 0xa
[    2.339226] [drm:drm_mode_debug_printmodeline], Modeline 15:"1280x800" 48 56428 1280 1296 1344 1440 800 801 804 818 0x40 0xa
[    2.339243] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    2.339267] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    2.339275] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[    2.339290] [drm] Adding LVDS downclock mode
[    2.339301] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[    2.339309] [drm:drm_mode_debug_printmodeline], Modeline 14:"1280x800" 60 70700 1280 1296 1344 1440 800 801 804 818 0x48 0xa
[    2.339322] [drm:drm_mode_debug_printmodeline], Modeline 15:"1280x800" 48 56428 1280 1296 1344 1440 800 801 804 818 0x40 0xa
[    2.339337] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    2.339351] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[    2.339359] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[    2.354197] [drm:intel_crt_detect], CRT detected via hotplug
[    2.367735] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[    2.367786] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes :
[    2.367799] [drm:drm_mode_debug_printmodeline], Modeline 9:"2048x1280" 60 174250 2048 2096 2128 2208 1280 1283 1289 1317 0x48 0x9
[    2.367818] [drm:drm_mode_debug_printmodeline], Modeline 21:"2048x1152" 60 198022 2048 2184 2408 2768 1152 1153 1156 1192 0x0 0x6
[    2.367836] [drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6
[    2.367855] [drm:drm_mode_debug_printmodeline], Modeline 19:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[    2.367873] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[    2.367891] [drm:drm_mode_debug_printmodeline], Modeline 18:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[    2.367909] [drm:drm_mode_debug_printmodeline], Modeline 17:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[    2.367926] [drm:drm_mode_debug_printmodeline], Modeline 16:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[    2.367944] [drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[    2.367963] [drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    2.367981] [drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[    2.367999] [drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[    2.368055] [drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[    2.368072] [drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[    2.368089] [drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[    2.368133] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[    2.368183] [drm:drm_mode_setcrtc], [CRTC:3]
[    2.368194] [drm:drm_crtc_helper_set_config], 
[    2.368203] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
[    2.368230] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
[    2.390867] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: commit=600
[    2.395563] [drm:intel_update_fbc], 
[    2.395578] [drm:intel_calculate_wm], FIFO entries required for mode: 29
[    2.395589] [drm:intel_calculate_wm], FIFO watermark level: 473
[    2.395599] [drm:pineview_update_wm], DSPFW1 register is ec830f0f
[    2.395609] [drm:intel_calculate_wm], FIFO entries required for mode: 31
[    2.395619] [drm:intel_calculate_wm], FIFO watermark level: 476
[    2.395630] [drm:intel_calculate_wm], FIFO entries required for mode: 160
[    2.395639] [drm:intel_calculate_wm], FIFO watermark level: 342
[    2.395649] [drm:intel_calculate_wm], FIFO entries required for mode: 162
[    2.395658] [drm:intel_calculate_wm], FIFO watermark level: 345
[    2.395667] [drm:pineview_update_wm], DSPFW3 register is 3f3f0156
[    2.395677] [drm:pineview_update_wm], Self-refresh is enabled
[    2.395811] usb 1-5: new high-speed USB device number 5 using ehci_hcd
[    2.395947] [drm:drm_crtc_helper_set_config], 
[    2.395957] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0)
[    2.395987] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    2.401535] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: commit=600
[    2.424638] [drm:i915_driver_open], 
[    2.424696] [drm:drm_crtc_helper_set_config], 
[    2.424706] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0)
[    2.424736] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    2.424780] [drm:i915_driver_open], 
[    2.424811] [drm:drm_crtc_helper_set_config], 
[    2.424820] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0)
[    2.424845] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    2.424888] [drm:i915_driver_open], 
[    2.424933] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
[    2.424950] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
[    2.425201] [drm:drm_crtc_helper_set_config], 
[    2.425211] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0)
[    2.425237] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    2.425333] [drm:i915_driver_open], 
[    2.425367] [drm:drm_crtc_helper_set_config], 
[    2.425377] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0)
[    2.425402] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    2.425444] [drm:i915_driver_open], 
[    2.425475] [drm:drm_crtc_helper_set_config], 
[    2.425484] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0)
[    2.425509] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    2.425551] [drm:i915_driver_open], 
[    2.425583] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
[    2.425599] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
[    2.425618] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    2.425630] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[    2.425662] [drm] Adding LVDS downclock mode
[    2.425683] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[    2.425695] [drm:drm_mode_debug_printmodeline], Modeline 14:"1280x800" 60 70700 1280 1296 1344 1440 800 801 804 818 0x48 0xa
[    2.425714] [drm:drm_mode_debug_printmodeline], Modeline 15:"1280x800" 48 56428 1280 1296 1344 1440 800 801 804 818 0x40 0xa
[    2.425737] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    2.425769] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    2.425780] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[    2.425802] [drm] Adding LVDS downclock mode
[    2.425820] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[    2.425830] [drm:drm_mode_debug_printmodeline], Modeline 14:"1280x800" 60 70700 1280 1296 1344 1440 800 801 804 818 0x48 0xa
[    2.425848] [drm:drm_mode_debug_printmodeline], Modeline 15:"1280x800" 48 56428 1280 1296 1344 1440 800 801 804 818 0x40 0xa
[    2.425871] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    2.425892] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[    2.425904] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[    2.438579] [drm:intel_crt_detect], CRT detected via hotplug
[    2.452091] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[    2.452131] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes :
[    2.452141] [drm:drm_mode_debug_printmodeline], Modeline 9:"2048x1280" 60 174250 2048 2096 2128 2208 1280 1283 1289 1317 0x48 0x9
[    2.452155] [drm:drm_mode_debug_printmodeline], Modeline 21:"2048x1152" 60 198022 2048 2184 2408 2768 1152 1153 1156 1192 0x0 0x6
[    2.452168] [drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6
[    2.452181] [drm:drm_mode_debug_printmodeline], Modeline 19:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[    2.452193] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[    2.452206] [drm:drm_mode_debug_printmodeline], Modeline 18:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[    2.452219] [drm:drm_mode_debug_printmodeline], Modeline 17:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[    2.452232] [drm:drm_mode_debug_printmodeline], Modeline 16:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[    2.452245] [drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[    2.452257] [drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    2.452270] [drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[    2.452283] [drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[    2.452295] [drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[    2.452308] [drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[    2.452320] [drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[    2.452355] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[    2.452424] [drm:drm_crtc_helper_set_config], 
[    2.452431] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0)
[    2.452450] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    2.467386] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd00223/0x840300/0x120c00, board id: 1724, fw id: 825392
[    2.520211] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[    2.529958] Chromium OS LSM: init_module locked module="/lib/modules/3.4.0/kernel/drivers/input/joydev.ko" pid=178 cmdline="/sbin/modprobe -bv input:b0011v0002p0007e01B1_e0,1,3,k110,145,148,14A,14D,14E,14F,ra0,1,18,1C,2F,35,36,39,3A,mlsfw"
[    2.530136] Chromium OS LSM: dev(8,3): writable
[    2.530165] Chromium OS LSM: module locking can be disabled.
[    2.628659] usb 1-5: New USB device found, idVendor=2232, idProduct=1013
[    2.628684] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.628702] usb 1-5: Product: WebCam SC-13HDO10B39N
[    2.628715] usb 1-5: Manufacturer: Namuga
[    2.842767] Linux video capture interface: v2.00
[    2.849552] uvcvideo: Found UVC 1.00 device WebCam SC-13HDO10B39N (2232:1013)
[    2.855681] scsi 4:0:0:0: Direct-Access              Patriot Memory   PMAP PQ: 0 ANSI: 6
[    2.857589] sd 4:0:0:0: [sdb] 61767680 512-byte logical blocks: (31.6 GB/29.4 GiB)
[    2.859144] sd 4:0:0:0: [sdb] Write Protect is off
[    2.859173] sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 00
[    2.860702] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    2.867465] usbcore: registered new interface driver uvcvideo
[    2.867482] USB Video Class driver (1.1.1)
[    2.875276] usb 1-4.1: new high-speed USB device number 6 using ehci_hcd
[    2.906462] [drm:intel_panel_actually_set_backlight], set backlight PWM = 13046
[    2.978134] usb 1-4.1: New USB device found, idVendor=0b95, idProduct=772a
[    2.978154] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.978169] usb 1-4.1: Product: AX88x72A
[    2.978179] usb 1-4.1: Manufacturer: ASIX Elec. Corp.
[    2.978189] usb 1-4.1: SerialNumber: 00077E
[    3.053301] usb 1-4.2: new low-speed USB device number 7 using ehci_hcd
[    3.150515] usb 1-4.2: New USB device found, idVendor=0461, idProduct=4e05
[    3.150540] usb 1-4.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    3.150558] usb 1-4.2: Product: Samsung USB Keyboard
[    3.177541] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: discard,commit=600
[    3.211267] GPT:partition_entry_array_crc32 values don't match: 0x73cdb9b5 != 0xcb70e24f
[    3.211285] GPT:Primary header thinks Alt. header is not at the end of the disk.
[    3.211299] GPT:4952000 != 61767679
[    3.211306] GPT:Alternate GPT header not at the end of the disk.
[    3.211318] GPT:4952000 != 61767679
[    3.211327] GPT: Use GNU Parted to correct GPT errors.
[    3.211444]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12
[    3.219420] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    3.225270] usb 1-4.3: new low-speed USB device number 8 using ehci_hcd
[    3.225481] input: Samsung USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.2/1-4.2:1.0/input/input7
[    3.225944] primax 0003:0461:4E05.0001: input,hidraw0: USB HID v1.11 Keyboard [Samsung USB Keyboard] on usb-0000:00:1d.7-4.2/input0
[    3.286158] EXT4-fs (sda1): re-mounted. Opts: commit=600,data=ordered
[    3.315564] usb 1-4.3: New USB device found, idVendor=093a, idProduct=2510
[    3.315584] usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.315599] usb 1-4.3: Product: USB Optical Mouse
[    3.315610] usb 1-4.3: Manufacturer: PixArt
[    3.319089] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.3/1-4.3:1.0/input/input8
[    3.319423] generic-usb 0003:093A:2510.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.7-4.3/input0
[    3.389877] EXT4-fs (sda1): re-mounted. Opts: commit=600,data=ordered
[    3.402825] cfg80211: Calling CRDA to update world regulatory domain
[    3.471003] ath: phy0: ASPM enabled: 0x42
[    3.471052] ath: EEPROM regdomain: 0x6a
[    3.471059] ath: EEPROM indicates we should expect a direct regpair map
[    3.471070] ath: Country alpha2 being used: 00
[    3.471077] ath: Regpair used: 0x6a
[    3.478452] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[    3.482773] Registered led device: ath9k-phy0
[    3.482796] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xf8c40000, irq=16
[    3.525704] asix 1-4.1:1.0: eth0: register 'asix' at usb-0000:00:1d.7-4.1, ASIX AX88772 USB 2.0 Ethernet, 00:00:00:00:07:7e
[    3.525845] usbcore: registered new interface driver asix
[    3.627047] cfg80211: World regulatory domain updated:
[    3.627057] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    3.627067] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    3.627076] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    3.627085] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    3.627094] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    3.627103] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    3.658877] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    3.790725] init: lockbox-cache pre-start process (701) terminated with status 1
[    4.249073] [drm:i915_driver_open], 
[    4.249158] [drm:drm_crtc_helper_set_config], 
[    4.249166] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0)
[    4.249195] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    4.249293] [drm:i915_driver_open], 
[    4.249462] [drm:drm_crtc_helper_set_config], 
[    4.249469] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0)
[    4.249487] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    4.249801] [drm:i915_driver_open], 
[    4.249865] [drm:drm_crtc_helper_set_config], 
[    4.249872] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0)
[    4.249889] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    4.249982] [drm:i915_driver_open], 
[    4.250680] [drm:i915_getparam], Unknown parameter 19
[    4.250752] [drm:i915_getparam], Unknown parameter 21
[    4.251318] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
[    4.251339] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
[    4.251502] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    4.251517] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[    4.251549] [drm] Adding LVDS downclock mode
[    4.251569] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[    4.251583] [drm:drm_mode_debug_printmodeline], Modeline 14:"1280x800" 60 70700 1280 1296 1344 1440 800 801 804 818 0x48 0xa
[    4.251603] [drm:drm_mode_debug_printmodeline], Modeline 15:"1280x800" 48 56428 1280 1296 1344 1440 800 801 804 818 0x40 0xa
[    4.251628] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    4.252342] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[    4.252359] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[    4.265091] [drm:intel_crt_detect], CRT detected via hotplug
[    4.278590] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[    4.278633] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes :
[    4.278645] [drm:drm_mode_debug_printmodeline], Modeline 9:"2048x1280" 60 174250 2048 2096 2128 2208 1280 1283 1289 1317 0x48 0x9
[    4.278664] [drm:drm_mode_debug_printmodeline], Modeline 21:"2048x1152" 60 198022 2048 2184 2408 2768 1152 1153 1156 1192 0x0 0x6
[    4.278682] [drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6
[    4.278700] [drm:drm_mode_debug_printmodeline], Modeline 19:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[    4.278718] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[    4.278736] [drm:drm_mode_debug_printmodeline], Modeline 18:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[    4.278754] [drm:drm_mode_debug_printmodeline], Modeline 17:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[    4.278772] [drm:drm_mode_debug_printmodeline], Modeline 16:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[    4.278790] [drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[    4.278807] [drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    4.278824] [drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[    4.278842] [drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[    4.278858] [drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[    4.278876] [drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[    4.278894] [drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[    4.278946] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[    4.279218] [drm:drm_mode_getconnector], [CONNECTOR:0:?]
[    4.279296] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    4.279309] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[    4.279345] [drm] Adding LVDS downclock mode
[    4.279365] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[    4.279377] [drm:drm_mode_debug_printmodeline], Modeline 14:"1280x800" 60 70700 1280 1296 1344 1440 800 801 804 818 0x48 0xa
[    4.279396] [drm:drm_mode_debug_printmodeline], Modeline 15:"1280x800" 48 56428 1280 1296 1344 1440 800 801 804 818 0x40 0xa
[    4.279420] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    4.283186] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[    4.283206] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[    4.295928] [drm:intel_crt_detect], CRT detected via hotplug
[    4.309809] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[    4.309844] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes :
[    4.309853] [drm:drm_mode_debug_printmodeline], Modeline 9:"2048x1280" 60 174250 2048 2096 2128 2208 1280 1283 1289 1317 0x48 0x9
[    4.309867] [drm:drm_mode_debug_printmodeline], Modeline 21:"2048x1152" 60 198022 2048 2184 2408 2768 1152 1153 1156 1192 0x0 0x6
[    4.309880] [drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6
[    4.309892] [drm:drm_mode_debug_printmodeline], Modeline 19:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[    4.309905] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[    4.309918] [drm:drm_mode_debug_printmodeline], Modeline 18:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[    4.309931] [drm:drm_mode_debug_printmodeline], Modeline 17:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[    4.309943] [drm:drm_mode_debug_printmodeline], Modeline 16:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[    4.309956] [drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[    4.309968] [drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    4.309981] [drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[    4.309993] [drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[    4.310047] [drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[    4.310066] [drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[    4.310084] [drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[    4.310142] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[    4.318625] [drm:intel_panel_get_max_backlight], max backlight PWM = 13046
[    4.318637] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7827
[    4.319196] [drm:intel_panel_get_max_backlight], max backlight PWM = 13046
[    4.319211] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7827
[    4.337702] [drm:drm_mode_addfb], [FB:33]
[    4.337831] [drm:drm_mode_setcrtc], [CRTC:4]
[    4.337849] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
[    4.337859] [drm:drm_crtc_helper_set_config], 
[    4.337865] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:33] #connectors=1 (x y) (0 0)
[    4.337895] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    4.341194] [drm:i9xx_update_plane], Writing base 01000000 00000000 0 0 8192
[    4.341212] [drm:intel_update_fbc], 
[    4.341221] [drm:intel_increase_pllclock], upclocking LVDS
[    4.371907] [drm:drm_mode_setcrtc], [CRTC:3]
[    4.371920] [drm:drm_crtc_helper_set_config], 
[    4.371928] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
[    4.427294] [drm:i915_getparam], Unknown parameter 19
[    4.570996] init: disable_echo main process (73) killed by TERM signal
[    4.573445] [drm:i915_driver_open], 
[    4.573687] [drm:i915_driver_open], 
[    4.573749] [drm:i915_driver_open], 
[    4.675844] [drm:i915_driver_open], 
[    4.675900] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
[    4.675918] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
[    4.675948] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    4.675962] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[    4.675996] [drm] Adding LVDS downclock mode
[    4.676086] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[    4.676100] [drm:drm_mode_debug_printmodeline], Modeline 14:"1280x800" 60 70700 1280 1296 1344 1440 800 801 804 818 0x48 0xa
[    4.676119] [drm:drm_mode_debug_printmodeline], Modeline 15:"1280x800" 48 56428 1280 1296 1344 1440 800 801 804 818 0x40 0xa
[    4.676145] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    5.056102] [drm:intel_decrease_pllclock], downclocking LVDS
[    5.396362] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    5.396377] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[    5.396402] [drm] Adding LVDS downclock mode
[    5.396417] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[    5.396427] [drm:drm_mode_debug_printmodeline], Modeline 14:"1280x800" 60 70700 1280 1296 1344 1440 800 801 804 818 0x48 0xa
[    5.396440] [drm:drm_mode_debug_printmodeline], Modeline 15:"1280x800" 48 56428 1280 1296 1344 1440 800 801 804 818 0x40 0xa
[    5.396458] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    5.396972] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[    5.396983] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[    5.409647] [drm:intel_crt_detect], CRT detected via hotplug
[    5.423198] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[    5.423253] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes :
[    5.423269] [drm:drm_mode_debug_printmodeline], Modeline 9:"2048x1280" 60 174250 2048 2096 2128 2208 1280 1283 1289 1317 0x48 0x9
[    5.423292] [drm:drm_mode_debug_printmodeline], Modeline 21:"2048x1152" 60 198022 2048 2184 2408 2768 1152 1153 1156 1192 0x0 0x6
[    5.423314] [drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6
[    5.423336] [drm:drm_mode_debug_printmodeline], Modeline 19:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[    5.423358] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[    5.423380] [drm:drm_mode_debug_printmodeline], Modeline 18:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[    5.423402] [drm:drm_mode_debug_printmodeline], Modeline 17:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[    5.423424] [drm:drm_mode_debug_printmodeline], Modeline 16:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[    5.423445] [drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[    5.423467] [drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    5.423489] [drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[    5.423510] [drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[    5.423530] [drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[    5.423551] [drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[    5.423571] [drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[    5.423652] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[    5.429083] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    5.429112] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[    5.429163] [drm] Adding LVDS downclock mode
[    5.429194] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[    5.429215] [drm:drm_mode_debug_printmodeline], Modeline 14:"1280x800" 60 70700 1280 1296 1344 1440 800 801 804 818 0x48 0xa
[    5.429248] [drm:drm_mode_debug_printmodeline], Modeline 15:"1280x800" 48 56428 1280 1296 1344 1440 800 801 804 818 0x40 0xa
[    5.429291] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    5.430512] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[    5.430537] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[    5.443190] [drm:intel_crt_detect], CRT detected via hotplug
[    5.456794] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[    5.456848] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes :
[    5.456862] [drm:drm_mode_debug_printmodeline], Modeline 9:"2048x1280" 60 174250 2048 2096 2128 2208 1280 1283 1289 1317 0x48 0x9
[    5.456885] [drm:drm_mode_debug_printmodeline], Modeline 21:"2048x1152" 60 198022 2048 2184 2408 2768 1152 1153 1156 1192 0x0 0x6
[    5.456906] [drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6
[    5.456927] [drm:drm_mode_debug_printmodeline], Modeline 19:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[    5.456949] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[    5.456970] [drm:drm_mode_debug_printmodeline], Modeline 18:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[    5.456991] [drm:drm_mode_debug_printmodeline], Modeline 17:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[    5.457065] [drm:drm_mode_debug_printmodeline], Modeline 16:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[    5.457098] [drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[    5.457128] [drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    5.457158] [drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[    5.457187] [drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[    5.457217] [drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[    5.457246] [drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[    5.457275] [drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[    5.457369] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[    5.458996] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    5.459063] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[    5.459113] [drm] Adding LVDS downclock mode
[    5.459144] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[    5.459165] [drm:drm_mode_debug_printmodeline], Modeline 14:"1280x800" 60 70700 1280 1296 1344 1440 800 801 804 818 0x48 0xa
[    5.459195] [drm:drm_mode_debug_printmodeline], Modeline 15:"1280x800" 48 56428 1280 1296 1344 1440 800 801 804 818 0x40 0xa
[    5.459237] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    5.460467] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[    5.460493] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[    5.473230] [drm:intel_crt_detect], CRT detected via hotplug
[    5.486758] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[    5.486811] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes :
[    5.486826] [drm:drm_mode_debug_printmodeline], Modeline 9:"2048x1280" 60 174250 2048 2096 2128 2208 1280 1283 1289 1317 0x48 0x9
[    5.486848] [drm:drm_mode_debug_printmodeline], Modeline 21:"2048x1152" 60 198022 2048 2184 2408 2768 1152 1153 1156 1192 0x0 0x6
[    5.486870] [drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6
[    5.486891] [drm:drm_mode_debug_printmodeline], Modeline 19:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[    5.486913] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[    5.486935] [drm:drm_mode_debug_printmodeline], Modeline 18:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[    5.486956] [drm:drm_mode_debug_printmodeline], Modeline 17:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[    5.486978] [drm:drm_mode_debug_printmodeline], Modeline 16:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[    5.486999] [drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[    5.487079] [drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    5.487111] [drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[    5.487142] [drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[    5.487171] [drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[    5.487201] [drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[    5.487230] [drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[    5.487325] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[    5.492515] [drm:drm_mode_addfb], [FB:34]
[    5.492570] [drm:drm_mode_setcrtc], [CRTC:4]
[    5.492599] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
[    5.492617] [drm:drm_crtc_helper_set_config], 
[    5.492631] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    5.492677] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    5.544284] [drm:i9xx_update_plane], Writing base 02000000 00000000 0 0 8192
[    5.544306] [drm:intel_update_fbc], 
[    5.544317] [drm:intel_increase_pllclock], upclocking LVDS
[    5.584968] [drm:drm_mode_setcrtc], [CRTC:3]
[    5.585079] [drm:drm_mode_setcrtc], [CONNECTOR:12:VGA-1]
[    5.585098] [drm:drm_crtc_helper_set_config], 
[    5.585112] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:34] #connectors=1 (x y) (0 860)
[    5.585154] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[    5.585173] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[    5.585192] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    5.585210] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[    5.585227] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:3]
[    5.585247] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[    5.585264] [drm:drm_mode_debug_printmodeline], Modeline 33:"" 0 174250 2048 2096 2128 2208 1280 1283 1289 1317 0x0 0x9
[    5.585303] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[    5.587330] [drm:i9xx_crtc_mode_set], Mode for pipe A:
[    5.587343] [drm:drm_mode_debug_printmodeline], Modeline 33:"" 0 174250 2048 2096 2128 2208 1280 1283 1289 1317 0x0 0x9
[    5.621138] [drm:i9xx_update_plane], Writing base 02000000 006B8000 0 860 8192
[    5.621158] [drm:intel_update_fbc], 
[    5.621173] [drm:pineview_update_wm], Self-refresh is disabled
[    5.621188] [drm:drm_crtc_helper_set_mode], [ENCODER:13:DAC-13] set [MODE:33:]
[    5.621204] [drm:pineview_update_wm], Self-refresh is disabled
[    5.621752] [drm:intel_update_fbc], 
[    5.621768] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[    5.621781] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:12:VGA-1] set DPMS on
[    5.623320] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    5.623341] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[    5.623382] [drm] Adding LVDS downclock mode
[    5.623412] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[    5.623430] [drm:drm_mode_debug_printmodeline], Modeline 14:"1280x800" 60 70700 1280 1296 1344 1440 800 801 804 818 0x48 0xa
[    5.623452] [drm:drm_mode_debug_printmodeline], Modeline 15:"1280x800" 48 56428 1280 1296 1344 1440 800 801 804 818 0x40 0xa
[    5.623481] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    5.624521] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[    5.624541] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[    5.638109] [drm:intel_crt_detect], CRT detected via hotplug
[    5.651582] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[    5.651632] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes :
[    5.651646] [drm:drm_mode_debug_printmodeline], Modeline 9:"2048x1280" 60 174250 2048 2096 2128 2208 1280 1283 1289 1317 0x48 0x9
[    5.651668] [drm:drm_mode_debug_printmodeline], Modeline 21:"2048x1152" 60 198022 2048 2184 2408 2768 1152 1153 1156 1192 0x0 0x6
[    5.651690] [drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6
[    5.651711] [drm:drm_mode_debug_printmodeline], Modeline 19:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[    5.651732] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[    5.651753] [drm:drm_mode_debug_printmodeline], Modeline 18:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[    5.651774] [drm:drm_mode_debug_printmodeline], Modeline 17:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[    5.651795] [drm:drm_mode_debug_printmodeline], Modeline 16:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[    5.651816] [drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[    5.651837] [drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    5.651858] [drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[    5.651878] [drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[    5.651899] [drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[    5.651919] [drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[    5.651939] [drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[    5.652073] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[    5.774511] [drm:i915_driver_open], 
[    5.774991] [drm:i915_getparam], Unknown parameter 19
[    5.789684] [drm:i915_driver_irq_handler], pipe A underrun
[    5.895112] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.986520] ieee80211 phy0: device now idle
[    6.002331] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    6.043343] ieee80211 phy0: device no longer idle - scanning
[    6.284104] [drm:intel_decrease_pllclock], downclocking LVDS
[    6.302059] [drm:intel_wait_for_vblank], vblank wait timed out
[    6.322110] [drm:intel_decrease_pllclock], downclocking LVDS
[    6.340158] [drm:intel_wait_for_vblank], vblank wait timed out
[    6.749528] [drm:drm_mode_setcrtc], [CRTC:3]
[    6.749557] [drm:drm_mode_setcrtc], [CONNECTOR:12:VGA-1]
[    6.749569] [drm:drm_crtc_helper_set_config], 
[    6.749577] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:34] #connectors=1 (x y) (0 860)
[    6.749608] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    6.749620] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:3]
[    6.749655] [drm:drm_mode_setcrtc], [CRTC:4]
[    6.749671] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
[    6.749680] [drm:drm_crtc_helper_set_config], 
[    6.749687] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    6.749711] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    6.749722] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:3]
[    6.978426] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    6.978453] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[    6.978500] [drm] Adding LVDS downclock mode
[    6.978528] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[    6.978547] [drm:drm_mode_debug_printmodeline], Modeline 14:"1280x800" 60 70700 1280 1296 1344 1440 800 801 804 818 0x48 0xa
[    6.978575] [drm:drm_mode_debug_printmodeline], Modeline 15:"1280x800" 48 56428 1280 1296 1344 1440 800 801 804 818 0x40 0xa
[    6.978614] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    6.979706] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[    6.979728] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[    6.988698] [drm:intel_crt_detect], CRT detected via hotplug
[    7.002296] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[    7.002354] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes :
[    7.002369] [drm:drm_mode_debug_printmodeline], Modeline 9:"2048x1280" 60 174250 2048 2096 2128 2208 1280 1283 1289 1317 0x48 0x9
[    7.002393] [drm:drm_mode_debug_printmodeline], Modeline 21:"2048x1152" 60 198022 2048 2184 2408 2768 1152 1153 1156 1192 0x0 0x6
[    7.002415] [drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6
[    7.002437] [drm:drm_mode_debug_printmodeline], Modeline 19:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[    7.002461] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[    7.002491] [drm:drm_mode_debug_printmodeline], Modeline 18:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[    7.002522] [drm:drm_mode_debug_printmodeline], Modeline 17:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[    7.002553] [drm:drm_mode_debug_printmodeline], Modeline 16:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[    7.002583] [drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[    7.002616] [drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    7.002646] [drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[    7.002670] [drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[    7.002692] [drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[    7.002721] [drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[    7.002752] [drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[    7.002885] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[    7.007811] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    7.007833] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[    7.007872] [drm] Adding LVDS downclock mode
[    7.007895] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[    7.007909] [drm:drm_mode_debug_printmodeline], Modeline 14:"1280x800" 60 70700 1280 1296 1344 1440 800 801 804 818 0x48 0xa
[    7.007931] [drm:drm_mode_debug_printmodeline], Modeline 15:"1280x800" 48 56428 1280 1296 1344 1440 800 801 804 818 0x40 0xa
[    7.007962] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    7.008966] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[    7.008986] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[    7.022060] [drm:intel_crt_detect], CRT detected via hotplug
[    7.035533] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[    7.035585] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes :
[    7.035600] [drm:drm_mode_debug_printmodeline], Modeline 9:"2048x1280" 60 174250 2048 2096 2128 2208 1280 1283 1289 1317 0x48 0x9
[    7.035622] [drm:drm_mode_debug_printmodeline], Modeline 21:"2048x1152" 60 198022 2048 2184 2408 2768 1152 1153 1156 1192 0x0 0x6
[    7.035644] [drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6
[    7.035666] [drm:drm_mode_debug_printmodeline], Modeline 19:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[    7.035688] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[    7.035709] [drm:drm_mode_debug_printmodeline], Modeline 18:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[    7.035730] [drm:drm_mode_debug_printmodeline], Modeline 17:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[    7.035752] [drm:drm_mode_debug_printmodeline], Modeline 16:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[    7.035772] [drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[    7.035793] [drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    7.035814] [drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[    7.035834] [drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[    7.035855] [drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[    7.035875] [drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[    7.035895] [drm:drm_mode_debug_printmodeline], Modeline 25:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[    7.036079] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[    7.371438] [drm:drm_mode_addfb], [FB:33]
[    7.371453] [drm:drm_mode_setcrtc], [CRTC:3]
[    7.371468] [drm:drm_mode_setcrtc], [CONNECTOR:12:VGA-1]
[    7.371475] [drm:drm_crtc_helper_set_config], 
[    7.371481] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:33] #connectors=1 (x y) (0 0)
[    7.371505] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    7.371513] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:3]
[    7.383947] [drm:i9xx_update_plane], Writing base 0A000000 00000000 0 0 8192
[    7.383960] [drm:intel_update_fbc], 
[    7.434090] [drm:intel_wait_for_vblank], vblank wait timed out
[    7.434192] [drm:drm_mode_addfb], [FB:35]
[    7.434210] [drm:drm_mode_setcrtc], [CRTC:4]
[    7.434229] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
[    7.434240] [drm:drm_crtc_helper_set_config], 
[    7.434250] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:35] #connectors=1 (x y) (0 0)
[    7.434278] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    7.434292] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:VGA-1] to [CRTC:3]
[    7.434312] [drm:i9xx_update_plane], Writing base 09000000 00000000 0 0 8192
[    7.434327] [drm:intel_update_fbc], 
[    7.434337] [drm:intel_increase_pllclock], upclocking LVDS
[    7.468106] [drm:drm_mode_addfb], [FB:36]
[    7.501463] [drm:intel_update_fbc], 
[    7.706105] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    7.709985] asix 1-4.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xC9E1
[    7.831501] [drm:drm_mode_addfb], [FB:37]
[    7.855417] [drm:intel_update_fbc], 
[    7.985051] [drm:intel_update_fbc], 
[    8.322277] [drm:intel_update_fbc], 
[    8.678097] [drm:intel_decrease_pllclock], downclocking LVDS
[    8.696057] [drm:intel_wait_for_vblank], vblank wait timed out
[    8.714074] [drm:intel_decrease_pllclock], downclocking LVDS
[    8.732076] [drm:intel_wait_for_vblank], vblank wait timed out
[    9.014092] [drm:intel_decrease_pllclock], downclocking LVDS
[    9.032040] [drm:intel_wait_for_vblank], vblank wait timed out
[    9.996077] ieee80211 phy0: device now idle
[   11.440607] [drm:intel_crt_detect], CRT detected via hotplug
[   11.440619] [drm:output_poll_execute], [CONNECTOR:12:VGA-1] status updated from 1 to 1
[   11.877499] low_mem: setting minfree to 102400 kB
[   11.912629] fuse init (API version 7.18)
[   12.002543] zsmalloc: module is from the staging directory, the quality is unknown, you have been warned.
[   12.009728] zram: module is from the staging directory, the quality is unknown, you have been warned.
[   12.010428] zram: num_devices not specified. Using default: 1
[   12.010441] zram: Creating 1 devices ...
[   12.057081] [drm:intel_decrease_pllclock], downclocking LVDS
[   12.075191] [drm:intel_wait_for_vblank], vblank wait timed out
[   12.162429] Bluetooth: Core ver 2.16
[   12.162552] NET: Registered protocol family 31
[   12.162564] Bluetooth: HCI device and connection manager initialized
[   12.162598] Bluetooth: HCI socket layer initialized
[   12.162630] Bluetooth: L2CAP socket layer initialized
[   12.162662] Bluetooth: SCO socket layer initialized
[   12.188932] Adding 2834416k swap on /dev/zram0.  Priority:-1 extents:1 across:2834416k SS
[   12.257443] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   12.287101] zram: open attempted while zram0 claimed (count: 3)
[   12.299938] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   12.433884] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   12.434431] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   12.436154] nm10_gpio version 0.04 built on Jun 14 2013 at 13:31:18
[   12.436191] gpiochip_find_base: found new base at 192
[   12.436314] gpiochip_add: registered GPIOs 192 to 255 on device: 0000:00:1f.0
[   12.454163] industrialio: module is from the staging directory, the quality is unknown, you have been warned.
[   12.468344] tsl2583: module is from the staging directory, the quality is unknown, you have been warned.
[   12.527445] usbcore: registered new interface driver qcserial
[   12.527528] USB Serial support registered for Qualcomm USB modem
[   12.527606] qcserial 1-2:1.1: Qualcomm USB modem converter detected
[   12.534247] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB0
[   12.680170] tsl2583 6-0029: Light sensor found.
[   13.411209] [drm:intel_increase_pllclock], upclocking LVDS
[   13.429052] [drm:intel_wait_for_vblank], vblank wait timed out
[   13.429329] [drm:intel_update_fbc], 
[   13.503418] i2c /dev entries driver
[   13.578607] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7831
[   13.612413] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7835
[   13.640387] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7840
[   13.671135] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7844
[   13.677751] [drm:intel_update_fbc], 
[   13.701780] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7848
[   13.732245] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7853
[   13.761240] [drm:intel_update_fbc], 
[   13.762661] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7857
[   13.793102] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7861
[   13.823505] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7865
[   13.827860] [drm:intel_update_fbc], 
[   13.856428] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7870
[   13.887178] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7874
[   13.894767] [drm:intel_update_fbc], 
[   13.917641] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7879
[   13.948710] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7883
[   13.979162] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7887
[   14.009573] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7891
[   14.040163] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7896
[   14.070607] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7900
[   14.101094] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7904
[   14.131572] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7908
[   14.162067] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7913
[   14.178252] [drm:intel_update_fbc], 
[   14.192494] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7917
[   14.223112] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7921
[   14.253654] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7925
[   14.284302] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7930
[   14.314868] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7934
[   14.345427] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7938
[   14.376002] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7942
[   14.406628] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7947
[   14.437164] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7951
[   14.467814] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7955
[   14.498478] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7960
[   14.529082] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7964
[   14.559995] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7968
[   14.590556] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7972
[   14.621106] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7977
[   14.651591] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7981
[   14.678412] [drm:intel_update_fbc], 
[   14.681806] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7985
[   14.712227] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7989
[   14.742656] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7994
[   14.773119] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7998
[   14.803537] [drm:intel_panel_actually_set_backlight], set backlight PWM = 8002
[   14.833968] [drm:intel_panel_actually_set_backlight], set backlight PWM = 8006
[   14.864428] [drm:intel_panel_actually_set_backlight], set backlight PWM = 8011
[   14.894820] [drm:intel_panel_actually_set_backlight], set backlight PWM = 8015
[   14.925255] [drm:intel_panel_actually_set_backlight], set backlight PWM = 8019
[   14.955688] [drm:intel_panel_actually_set_backlight], set backlight PWM = 8023
[   14.986242] [drm:intel_panel_actually_set_backlight], set backlight PWM = 8028
[   15.016958] [drm:intel_panel_actually_set_backlight], set backlight PWM = 8032
[   15.047655] [drm:intel_panel_actually_set_backlight], set backlight PWM = 8036
[   15.078278] [drm:intel_panel_actually_set_backlight], set backlight PWM = 8040
[   15.108766] [drm:intel_panel_actually_set_backlight], set backlight PWM = 8045
[   15.139249] [drm:intel_panel_actually_set_backlight], set backlight PWM = 8049
[   15.169715] [drm:intel_panel_actually_set_backlight], set backlight PWM = 8053
[   15.178743] [drm:intel_update_fbc], 
[   15.200395] [drm:intel_panel_actually_set_backlight], set backlight PWM = 8057
[   15.231412] [drm:intel_panel_actually_set_backlight], set backlight PWM = 8062
[   15.261979] [drm:intel_panel_actually_set_backlight], set backlight PWM = 8066
[   15.292539] [drm:intel_panel_actually_set_backlight], set backlight PWM = 8070
[   15.322968] [drm:intel_panel_actually_set_backlight], set backlight PWM = 8075
[   15.353552] [drm:intel_panel_actually_set_backlight], set backlight PWM = 8079
[   15.383929] [drm:intel_panel_actually_set_backlight], set backlight PWM = 8083
[   15.414520] [drm:intel_panel_actually_set_backlight], set backlight PWM = 8087
[   15.445103] [drm:intel_panel_actually_set_backlight], set backlight PWM = 8092
[   15.475942] [drm:intel_panel_actually_set_backlight], set backlight PWM = 8096
[   15.487681] zram: open attempted while zram0 claimed (count: 3)
[   15.487725] zram: open attempted while zram0 claimed (count: 3)
[   15.487878] zram: open attempted while zram0 claimed (count: 3)
[   15.490086] zram: open attempted while zram0 claimed (count: 3)
[   15.490138] zram: open attempted while zram0 claimed (count: 3)
[   15.490182] zram: open attempted while zram0 claimed (count: 3)
[   15.506445] [drm:intel_panel_actually_set_backlight], set backlight PWM = 8100
[   15.537003] [drm:intel_panel_actually_set_backlight], set backlight PWM = 8104
[   15.567600] [drm:intel_panel_actually_set_backlight], set backlight PWM = 8106
[   15.679138] [drm:intel_update_fbc], 
[   16.179529] [drm:intel_update_fbc], 
[   16.596342] [drm:intel_update_fbc], 
[   16.679748] [drm:intel_update_fbc], 
[   16.995132] usb 1-2: USB disconnect, device number 3
[   16.995687] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
[   16.995788] qcserial 1-2:1.1: device disconnected
[   17.180101] [drm:intel_update_fbc], 
[   17.308166] usb 1-2: new high-speed USB device number 9 using ehci_hcd
[   17.425387] usb 1-2: New USB device found, idVendor=05c6, idProduct=9245
[   17.425412] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[   17.425431] usb 1-2: Product: Qualcomm Gobi 2000
[   17.425444] usb 1-2: Manufacturer: Qualcomm Incorporated
[   17.429004] qcserial 1-2:1.1: Qualcomm USB modem converter detected
[   17.429495] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB0
[   17.430566] qcserial 1-2:1.2: Qualcomm USB modem converter detected
[   17.430984] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB1
[   17.431948] qcserial 1-2:1.3: Qualcomm USB modem converter detected
[   17.432594] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB2
[   17.482134] gobi: 1.0.110+google+w0
[   17.485339] gobi 1-2:1.0: wwan0: register 'gobi' at usb-0000:00:1d.7-2, QCUSBNet Ethernet Device, ce:e0:bd:e6:77:cb
[   17.697331] [drm:intel_update_fbc], 
[   18.197402] [drm:intel_update_fbc], 
[   18.287406] init: bootcache main process (7221) terminated with status 2
[   18.697889] [drm:intel_update_fbc], 
[   19.198193] [drm:intel_update_fbc], 
[   19.698504] [drm:intel_update_fbc], 
[   20.198853] [drm:intel_update_fbc], 
[   20.512923] ieee80211 phy0: device no longer idle - scanning
[   20.599132] [drm:intel_update_fbc], 
[   20.699212] [drm:intel_update_fbc], 
[   21.098585] gobi: registered qcqmi0
[   21.098753] usbcore: registered new interface driver gobi
[   21.199388] [drm:intel_update_fbc], 
[   21.699821] [drm:intel_update_fbc], 
[   22.200154] [drm:intel_update_fbc], 
[   22.700537] [drm:intel_update_fbc], 
[   23.200847] [drm:intel_update_fbc], 
[   23.701189] [drm:intel_update_fbc], 
[   24.003113] ieee80211 phy0: device now idle
[   24.201361] [drm:intel_update_fbc], 
[   24.701839] [drm:intel_update_fbc], 
[   25.202121] [drm:intel_update_fbc], 
[   25.702390] [drm:intel_update_fbc], 
[   26.202825] [drm:intel_update_fbc], 
[   26.703117] [drm:intel_update_fbc], 
[   27.203379] [drm:intel_update_fbc], 
[   27.703769] [drm:intel_update_fbc], 
[   28.204046] [drm:intel_update_fbc], 
[   28.704370] [drm:intel_update_fbc], 
[   29.204779] [drm:intel_update_fbc], 
[   29.705150] [drm:intel_update_fbc], 
[   30.205444] [drm:intel_update_fbc], 
[   30.705774] [drm:intel_update_fbc], 
[   31.206121] [drm:intel_update_fbc], 
[   31.723102] [drm:intel_update_fbc], 
[   32.223469] [drm:intel_update_fbc], 
[   32.723772] [drm:intel_update_fbc], 
[   33.224135] [drm:intel_update_fbc], 
[   33.724317] [drm:intel_update_fbc], 
[   34.224800] [drm:intel_update_fbc], 
[   34.244420] ieee80211 phy0: device no longer idle - scanning
[   34.725138] [drm:intel_update_fbc], 
[   35.225394] [drm:intel_update_fbc], 
[   35.725759] [drm:intel_update_fbc], 
[   36.226171] [drm:intel_update_fbc], 
[   36.726409] [drm:intel_update_fbc], 
[   37.226767] [drm:intel_update_fbc], 
[   37.673098] ieee80211 phy0: device now idle
[   37.727083] [drm:intel_update_fbc], 
[   38.227418] [drm:intel_update_fbc], 
[   38.727759] [drm:intel_update_fbc], 
[   39.228140] [drm:intel_update_fbc], 
[   39.728414] [drm:intel_update_fbc], 
[   40.228728] [drm:intel_update_fbc], 
[   40.729078] [drm:intel_update_fbc], 
[   41.229416] [drm:intel_update_fbc], 
[   41.729717] [drm:intel_update_fbc], 
[   42.230069] [drm:intel_update_fbc], 
[   42.730539] [drm:intel_update_fbc], 
[   43.230724] [drm:intel_update_fbc], 
[   43.627078] gobi: int_callback: urb status = -2
[   43.731089] [drm:intel_update_fbc], 
[   43.750184] init: tlsdated main process (4515) killed by TERM signal
[   44.231362] [drm:intel_update_fbc], 
[   44.731604] [drm:intel_update_fbc], 
[   45.232107] [drm:intel_update_fbc], 
[   45.732403] [drm:intel_update_fbc], 
[   46.232703] [drm:intel_update_fbc], 
[   46.733055] [drm:intel_update_fbc], 
[   46.866462] [drm:intel_update_fbc], 
[   47.234886] [drm:intel_update_fbc], 
[   47.733702] [drm:intel_update_fbc], 
[   47.902871] ieee80211 phy0: device no longer idle - scanning
[   48.233916] [drm:intel_update_fbc], 
[   48.734236] [drm:intel_update_fbc], 
[   49.234717] [drm:intel_update_fbc], 
[   49.751689] [drm:intel_update_fbc], 
[   50.251918] [drm:intel_update_fbc], 
[   50.752315] [drm:intel_update_fbc], 
[   51.252646] [drm:intel_update_fbc], 
[   51.340176] ieee80211 phy0: device now idle
[   51.752983] [drm:intel_update_fbc], 
[   52.253261] [drm:intel_update_fbc], 
[   52.753626] [drm:intel_update_fbc], 
[   53.253915] [drm:intel_update_fbc], 
[   53.754346] [drm:intel_update_fbc], 
[   54.254648] [drm:intel_update_fbc], 
[   54.754911] [drm:intel_update_fbc], 
[   55.255318] [drm:intel_update_fbc], 
[   55.755650] [drm:intel_update_fbc], 
[   56.255970] [drm:intel_update_fbc], 
[   56.756218] [drm:intel_update_fbc], 
[   57.256634] [drm:intel_update_fbc], 
[   57.756876] [drm:intel_update_fbc], 
[   58.257181] [drm:intel_update_fbc], 
[   58.757595] [drm:intel_update_fbc], 
[   59.257948] [drm:intel_update_fbc], 
[   59.758256] [drm:intel_update_fbc], 
[   60.258581] [drm:intel_update_fbc], 
[   60.762513] [drm:intel_update_fbc], 
[   61.263363] [drm:intel_update_fbc], 
[   61.759584] [drm:intel_update_fbc], 
[   62.259796] [drm:intel_update_fbc], 
[   62.760247] [drm:intel_update_fbc], 
[   63.260612] [drm:intel_update_fbc], 
[   63.760803] [drm:intel_update_fbc], 
[   64.261137] [drm:intel_update_fbc], 
[   64.761601] [drm:intel_update_fbc], 
[   65.261924] [drm:intel_update_fbc], 
[   65.762233] [drm:intel_update_fbc], 
[   66.262539] [drm:intel_update_fbc], 
[   66.762869] [drm:intel_update_fbc], 
[   67.263199] [drm:intel_update_fbc], 
[   67.763541] [drm:intel_update_fbc], 
[   68.263780] [drm:intel_update_fbc], 
[   68.764119] [drm:intel_update_fbc], 
[   69.264490] [drm:intel_update_fbc], 
[   69.764893] [drm:intel_update_fbc], 
[   70.265232] [drm:intel_update_fbc], 
[   70.765545] [drm:intel_update_fbc], 
[   71.265774] [drm:intel_update_fbc], 
[   71.766090] [drm:intel_update_fbc], 
[   72.283100] [drm:intel_update_fbc], 
[   72.783545] [drm:intel_update_fbc], 
[   73.283807] [drm:intel_update_fbc], 
[   73.784207] [drm:intel_update_fbc], 
[   74.284529] [drm:intel_update_fbc], 
[   74.784761] [drm:intel_update_fbc], 
[   75.285195] [drm:intel_update_fbc], 
[   75.785525] [drm:intel_update_fbc], 
[   76.285890] [drm:intel_update_fbc], 
[   76.786092] [drm:intel_update_fbc], 
[   77.286434] [drm:intel_update_fbc], 
[   77.786895] [drm:intel_update_fbc], 
[   78.287197] [drm:intel_update_fbc], 
[   78.787534] [drm:intel_update_fbc], 
[   79.287865] [drm:intel_update_fbc], 
[   79.788204] [drm:intel_update_fbc], 
[   80.288516] [drm:intel_update_fbc], 
[   80.788858] [drm:intel_update_fbc], 
[   80.872225] [drm:intel_update_fbc], 
[   81.289082] [drm:intel_update_fbc], 
[   81.789505] [drm:intel_update_fbc], 
[   82.289869] [drm:intel_update_fbc], 
[   82.790169] [drm:intel_update_fbc], 
[   83.290523] [drm:intel_update_fbc], 
[   83.790792] [drm:intel_update_fbc], 
[   84.291136] [drm:intel_update_fbc], 
[   84.791386] [drm:intel_update_fbc], 
[   85.291832] [drm:intel_update_fbc], 
[   85.792173] [drm:intel_update_fbc], 
[   86.292436] [drm:intel_update_fbc], 
[   86.792824] [drm:intel_update_fbc], 
[   87.293042] [drm:intel_update_fbc], 
[   87.793370] [drm:intel_update_fbc], 
[   88.293704] [drm:intel_update_fbc], 
[   88.794033] [drm:intel_update_fbc], 


More information about the Intel-gfx mailing list