[Intel-gfx] [PATCH 3/5] drm/i915: copy fetched mode state into crtc at setup_hw time v4

[Jesse Barnes]

We already fetch and track other state into the main CRTC and encoder
structs, and for fastboot we need to do the same with the mode and clock
data we read out.

v2: fix debug print
v3: use fastboot param around state copy
v4: set clock and flags for crtc here instead of in setup_hw_state

Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
---
 drivers/gpu/drm/i915/intel_display.c |   37 ++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index e75ce2f..8a7da45 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4731,6 +4731,27 @@ static void intel_get_pipe_timings(struct intel_crtc *crtc,
 	pipe_config->requested_mode.hdisplay = ((tmp >> 16) & 0xffff) + 1;
 }
 
+static void intel_pipe_config_to_crtc(struct intel_crtc *intel_crtc,
+				      struct intel_crtc_config *pipe_config)
+{
+	struct drm_crtc *crtc = &intel_crtc->base;
+
+	crtc->mode.hdisplay = pipe_config->adjusted_mode.crtc_hdisplay;
+	crtc->mode.htotal = pipe_config->adjusted_mode.crtc_htotal;
+	crtc->mode.hsync_start = pipe_config->adjusted_mode.crtc_hsync_start;
+	crtc->mode.hsync_end = pipe_config->adjusted_mode.crtc_hsync_end;
+
+	crtc->mode.vdisplay = pipe_config->adjusted_mode.crtc_vdisplay;
+	crtc->mode.vtotal = pipe_config->adjusted_mode.crtc_vtotal;
+	crtc->mode.vsync_start = pipe_config->adjusted_mode.crtc_vsync_start;
+	crtc->mode.vsync_end = pipe_config->adjusted_mode.crtc_vsync_end;
+
+	crtc->mode.flags = pipe_config->adjusted_mode.flags;
+
+	crtc->mode.clock = pipe_config->adjusted_mode.clock;
+	crtc->mode.flags |= pipe_config->adjusted_mode.flags;
+}
+
 static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc)
 {
 	struct drm_device *dev = intel_crtc->base.dev;
@@ -9945,6 +9966,22 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
 
 	intel_modeset_readout_hw_state(dev);
 
+	/*
+	 * Now that we have the config, copy it to each CRTC struct
+	 * Note that this could go away if we move to using crtc_config
+	 * checking everywhere.
+	 */
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list,
+			    base.head) {
+		if (crtc->active && i915_fastboot) {
+			intel_pipe_config_to_crtc(crtc, &crtc->config);
+
+			DRM_DEBUG_KMS("[CRTC:%d] found active mode: ",
+				      crtc->base.base.id);
+			drm_mode_debug_printmodeline(&crtc->base.mode);
+		}
+	}
+
 	/* HW state is read out, now we need to sanitize this mess. */
 	list_for_each_entry(encoder, &dev->mode_config.encoder_list,
 			    base.head) {
-- 
1.7.9.5