[Intel-gfx] [PATCH] drm/i915: pixel multiplier readout support for pch ports

Daniel Vetter daniel at ffwll.ch
Sun Jun 30 21:25:38 CEST 2013


On Fri, Jun 28, 2013 at 10:20:35AM -0700, Jesse Barnes wrote:
> On Thu, 27 Jun 2013 19:47:19 +0200
> Daniel Vetter <daniel.vetter at ffwll.ch> wrote:
> 
> > Now that we painstakingly track the shared pch dplls we can finally
> > implement pixel mutliplier readout support for pch ports, too.
> > 
> > v2: Undo the temporary hack to disable the sdvo pixel multiplier
> > cross-checking.
> > 
> > Cc: Imre Deak <imre.deak at intel.com>
> > Cc: Jesse Barnes <jbarnes at virtuousgeek.org>
> > Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
> > ---
> >  drivers/gpu/drm/i915/intel_display.c | 12 ++++++------
> >  drivers/gpu/drm/i915/intel_sdvo.c    |  3 ---
> >  2 files changed, 6 insertions(+), 9 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > index 04c2cab..16aacfa 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -5778,10 +5778,6 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
> >  
> >  		ironlake_get_fdi_m_n_config(crtc, pipe_config);
> >  
> > -		/* XXX: Can't properly read out the pch dpll pixel multiplier
> > -		 * since we don't have state tracking for pch clocks yet. */
> > -		pipe_config->pixel_multiplier = 1;
> > -
> >  		if (HAS_PCH_IBX(dev_priv->dev)) {
> >  			pipe_config->shared_dpll = crtc->pipe;
> >  		} else {
> > @@ -5796,6 +5792,11 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
> >  
> >  		WARN_ON(!pll->get_hw_state(dev_priv, pll,
> >  					   &pipe_config->dpll_hw_state));
> > +
> > +		tmp = pipe_config->dpll_hw_state.dpll;
> > +		pipe_config->pixel_multiplier =
> > +			((tmp & PLL_REF_SDVO_HDMI_MULTIPLIER_MASK)
> > +			 >> PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT) + 1;
> >  	} else {
> >  		pipe_config->pixel_multiplier = 1;
> >  	}
> > @@ -8046,8 +8047,7 @@ intel_pipe_config_compare(struct drm_device *dev,
> >  	PIPE_CONF_CHECK_I(adjusted_mode.crtc_vsync_start);
> >  	PIPE_CONF_CHECK_I(adjusted_mode.crtc_vsync_end);
> >  
> > -	if (!HAS_PCH_SPLIT(dev))
> > -		PIPE_CONF_CHECK_I(pixel_multiplier);
> > +	PIPE_CONF_CHECK_I(pixel_multiplier);
> >  
> >  	PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
> >  			      DRM_MODE_FLAG_INTERLACE);
> > diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
> > index 2628d56..8415d6a 100644
> > --- a/drivers/gpu/drm/i915/intel_sdvo.c
> > +++ b/drivers/gpu/drm/i915/intel_sdvo.c
> > @@ -1370,9 +1370,6 @@ static void intel_sdvo_get_config(struct intel_encoder *encoder,
> >  		break;
> >  	}
> >  
> > -	if(HAS_PCH_SPLIT(dev))
> > -		return; /* no pixel multiplier readout support yet */
> > -
> >  	WARN(encoder_pixel_multiplier != pipe_config->pixel_multiplier,
> >  	     "SDVO pixel multiplier mismatch, port: %i, encoder: %i\n",
> >  	     pipe_config->pixel_multiplier, encoder_pixel_multiplier);
> 
> Yay
> 
> Reviewed-by: Jesse Barnes <jbarnes at virtuousgeek.org>

Queued for -next, thanks for the review.
-Daniel
-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch



More information about the Intel-gfx mailing list