[Intel-gfx] [PATCH 05/28] drm/i915: panel power sequencing for VLV eDP
Jesse Barnes
jbarnes at virtuousgeek.org
Fri Mar 1 22:14:08 CET 2013
PPS register offsets have changed in Valleyview.
Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
Signed-off-by: Gajanan Bhat <gajanan.bhat at intel.com>
Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman at intel.com>
Signed-off-by: Ben Widawsky <benjamin.widawsky at intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 9 ++
drivers/gpu/drm/i915/intel_display.c | 1 -
drivers/gpu/drm/i915/intel_dp.c | 171 ++++++++++++++++++++++++----------
3 files changed, 132 insertions(+), 49 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index b0124e3..766518b 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4132,6 +4132,15 @@
#define PIPEB_PP_OFF_DELAYS (VLV_DISPLAY_BASE + 0x6130c)
#define PIPEB_PP_DIVISOR (VLV_DISPLAY_BASE + 0x61310)
+#define VLV_PIPE_PP_STATUS(pipe) _PIPE(pipe, PIPEA_PP_STATUS, PIPEB_PP_STATUS)
+#define VLV_PIPE_PP_CONTROL(pipe) _PIPE(pipe, PIPEA_PP_CONTROL, PIPEB_PP_CONTROL)
+#define VLV_PIPE_PP_ON_DELAYS(pipe) \
+ _PIPE(pipe, PIPEA_PP_ON_DELAYS, PIPEB_PP_ON_DELAYS)
+#define VLV_PIPE_PP_OFF_DELAYS(pipe) \
+ _PIPE(pipe, PIPEA_PP_OFF_DELAYS, PIPEB_PP_OFF_DELAYS)
+#define VLV_PIPE_PP_DIVISOR(pipe) \
+ _PIPE(pipe, PIPEA_PP_DIVISOR, PIPEB_PP_DIVISOR)
+
#define PCH_PP_STATUS 0xc7200
#define PCH_PP_CONTROL 0xc7204
#define PANEL_UNLOCK_REGS (0xabcd << 16)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index cb4ecad..3b189fa 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8551,7 +8551,6 @@ static void intel_setup_outputs(struct drm_device *dev)
if (I915_READ(VLV_DISPLAY_BASE + DP_B) & DP_DETECTED)
intel_dp_init(dev, VLV_DISPLAY_BASE + DP_B, PORT_B);
}
-
if (I915_READ(VLV_DISPLAY_BASE + SDVOC) & PORT_DETECTED)
intel_hdmi_init(dev, VLV_DISPLAY_BASE + SDVOC, PORT_C);
} else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 2903380..68d238d 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -294,16 +294,20 @@ static bool ironlake_edp_have_panel_power(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 pp_stat_reg;
- return (I915_READ(PCH_PP_STATUS) & PP_ON) != 0;
+ pp_stat_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_STATUS : PCH_PP_STATUS;
+ return (I915_READ(pp_stat_reg) & PP_ON) != 0;
}
static bool ironlake_edp_have_panel_vdd(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 pp_ctrl_reg;
- return (I915_READ(PCH_PP_CONTROL) & EDP_FORCE_VDD) != 0;
+ pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
+ return (I915_READ(pp_ctrl_reg) & EDP_FORCE_VDD) != 0;
}
static void
@@ -311,14 +315,19 @@ intel_dp_check_edp(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 pp_stat_reg, pp_ctrl_reg;
if (!is_edp(intel_dp))
return;
+
+ pp_stat_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_STATUS : PCH_PP_STATUS;
+ pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
+
if (!ironlake_edp_have_panel_power(intel_dp) && !ironlake_edp_have_panel_vdd(intel_dp)) {
WARN(1, "eDP powered off while attempting aux channel communication.\n");
DRM_DEBUG_KMS("Status 0x%08x Control 0x%08x\n",
- I915_READ(PCH_PP_STATUS),
- I915_READ(PCH_PP_CONTROL));
+ I915_READ(pp_stat_reg),
+ I915_READ(pp_ctrl_reg));
}
}
@@ -986,16 +995,20 @@ static void ironlake_wait_panel_status(struct intel_dp *intel_dp,
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 pp_stat_reg, pp_ctrl_reg;
+
+ pp_stat_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_STATUS : PCH_PP_STATUS;
+ pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
DRM_DEBUG_KMS("mask %08x value %08x status %08x control %08x\n",
- mask, value,
- I915_READ(PCH_PP_STATUS),
- I915_READ(PCH_PP_CONTROL));
+ mask, value,
+ I915_READ(pp_stat_reg),
+ I915_READ(pp_ctrl_reg));
- if (_wait_for((I915_READ(PCH_PP_STATUS) & mask) == value, 5000, 10)) {
+ if (_wait_for((I915_READ(pp_stat_reg) & mask) == value, 5000, 10)) {
DRM_ERROR("Panel status timeout: status %08x control %08x\n",
- I915_READ(PCH_PP_STATUS),
- I915_READ(PCH_PP_CONTROL));
+ I915_READ(pp_stat_reg),
+ I915_READ(pp_ctrl_reg));
}
}
@@ -1022,9 +1035,15 @@ static void ironlake_wait_panel_power_cycle(struct intel_dp *intel_dp)
* is locked
*/
-static u32 ironlake_get_pp_control(struct drm_i915_private *dev_priv)
+static u32 ironlake_get_pp_control(struct intel_dp *intel_dp)
{
- u32 control = I915_READ(PCH_PP_CONTROL);
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 control;
+ u32 pp_ctrl_reg;
+
+ pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
+ control = I915_READ(pp_ctrl_reg);
control &= ~PANEL_UNLOCK_MASK;
control |= PANEL_UNLOCK_REGS;
@@ -1036,6 +1055,7 @@ void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp)
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
+ u32 pp_stat_reg, pp_ctrl_reg;
if (!is_edp(intel_dp))
return;
@@ -1054,13 +1074,16 @@ void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp)
if (!ironlake_edp_have_panel_power(intel_dp))
ironlake_wait_panel_power_cycle(intel_dp);
- pp = ironlake_get_pp_control(dev_priv);
+ pp = ironlake_get_pp_control(intel_dp);
pp |= EDP_FORCE_VDD;
- I915_WRITE(PCH_PP_CONTROL, pp);
- POSTING_READ(PCH_PP_CONTROL);
- DRM_DEBUG_KMS("PCH_PP_STATUS: 0x%08x PCH_PP_CONTROL: 0x%08x\n",
- I915_READ(PCH_PP_STATUS), I915_READ(PCH_PP_CONTROL));
+ pp_stat_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_STATUS : PCH_PP_STATUS;
+ pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
+
+ I915_WRITE(pp_ctrl_reg, pp);
+ POSTING_READ(pp_ctrl_reg);
+ DRM_DEBUG_KMS("PP_STATUS: 0x%08x PP_CONTROL: 0x%08x\n",
+ I915_READ(pp_stat_reg), I915_READ(pp_ctrl_reg));
/*
* If the panel wasn't on, delay before accessing aux channel
*/
@@ -1075,19 +1098,23 @@ static void ironlake_panel_vdd_off_sync(struct intel_dp *intel_dp)
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
+ u32 pp_stat_reg, pp_ctrl_reg;
WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
if (!intel_dp->want_panel_vdd && ironlake_edp_have_panel_vdd(intel_dp)) {
- pp = ironlake_get_pp_control(dev_priv);
+ pp = ironlake_get_pp_control(intel_dp);
pp &= ~EDP_FORCE_VDD;
- I915_WRITE(PCH_PP_CONTROL, pp);
- POSTING_READ(PCH_PP_CONTROL);
- /* Make sure sequencer is idle before allowing subsequent activity */
- DRM_DEBUG_KMS("PCH_PP_STATUS: 0x%08x PCH_PP_CONTROL: 0x%08x\n",
- I915_READ(PCH_PP_STATUS), I915_READ(PCH_PP_CONTROL));
+ pp_stat_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_STATUS : PCH_PP_STATUS;
+ pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
+
+ I915_WRITE(pp_ctrl_reg, pp);
+ POSTING_READ(pp_ctrl_reg);
+ /* Make sure sequencer is idle before allowing subsequent activity */
+ DRM_DEBUG_KMS("PP_STATUS: 0x%08x PP_CONTROL: 0x%08x\n",
+ I915_READ(pp_stat_reg), I915_READ(pp_ctrl_reg));
msleep(intel_dp->panel_power_down_delay);
}
}
@@ -1131,6 +1158,7 @@ void ironlake_edp_panel_on(struct intel_dp *intel_dp)
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
+ u32 pp_ctrl_reg;
if (!is_edp(intel_dp))
return;
@@ -1144,7 +1172,7 @@ void ironlake_edp_panel_on(struct intel_dp *intel_dp)
ironlake_wait_panel_power_cycle(intel_dp);
- pp = ironlake_get_pp_control(dev_priv);
+ pp = ironlake_get_pp_control(intel_dp);
if (IS_GEN5(dev)) {
/* ILK workaround: disable reset around power sequence */
pp &= ~PANEL_POWER_RESET;
@@ -1156,8 +1184,10 @@ void ironlake_edp_panel_on(struct intel_dp *intel_dp)
if (!IS_GEN5(dev))
pp |= PANEL_POWER_RESET;
- I915_WRITE(PCH_PP_CONTROL, pp);
- POSTING_READ(PCH_PP_CONTROL);
+ pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
+
+ I915_WRITE(pp_ctrl_reg, pp);
+ POSTING_READ(pp_ctrl_reg);
ironlake_wait_panel_on(intel_dp);
@@ -1173,6 +1203,7 @@ void ironlake_edp_panel_off(struct intel_dp *intel_dp)
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
+ u32 pp_ctrl_reg;
if (!is_edp(intel_dp))
return;
@@ -1181,12 +1212,15 @@ void ironlake_edp_panel_off(struct intel_dp *intel_dp)
WARN(!intel_dp->want_panel_vdd, "Need VDD to turn off panel\n");
- pp = ironlake_get_pp_control(dev_priv);
+ pp = ironlake_get_pp_control(intel_dp);
/* We need to switch off panel power _and_ force vdd, for otherwise some
* panels get very unhappy and cease to work. */
pp &= ~(POWER_TARGET_ON | EDP_FORCE_VDD | PANEL_POWER_RESET | EDP_BLC_ENABLE);
- I915_WRITE(PCH_PP_CONTROL, pp);
- POSTING_READ(PCH_PP_CONTROL);
+
+ pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
+
+ I915_WRITE(pp_ctrl_reg, pp);
+ POSTING_READ(pp_ctrl_reg);
intel_dp->want_panel_vdd = false;
@@ -1200,6 +1234,7 @@ void ironlake_edp_backlight_on(struct intel_dp *intel_dp)
struct drm_i915_private *dev_priv = dev->dev_private;
int pipe = to_intel_crtc(intel_dig_port->base.base.crtc)->pipe;
u32 pp;
+ u32 pp_ctrl_reg;
if (!is_edp(intel_dp))
return;
@@ -1212,10 +1247,13 @@ void ironlake_edp_backlight_on(struct intel_dp *intel_dp)
* allowing it to appear.
*/
msleep(intel_dp->backlight_on_delay);
- pp = ironlake_get_pp_control(dev_priv);
+ pp = ironlake_get_pp_control(intel_dp);
pp |= EDP_BLC_ENABLE;
- I915_WRITE(PCH_PP_CONTROL, pp);
- POSTING_READ(PCH_PP_CONTROL);
+
+ pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
+
+ I915_WRITE(pp_ctrl_reg, pp);
+ POSTING_READ(pp_ctrl_reg);
intel_panel_enable_backlight(dev, pipe);
}
@@ -1225,6 +1263,7 @@ void ironlake_edp_backlight_off(struct intel_dp *intel_dp)
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
+ u32 pp_ctrl_reg;
if (!is_edp(intel_dp))
return;
@@ -1232,10 +1271,13 @@ void ironlake_edp_backlight_off(struct intel_dp *intel_dp)
intel_panel_disable_backlight(dev);
DRM_DEBUG_KMS("\n");
- pp = ironlake_get_pp_control(dev_priv);
+ pp = ironlake_get_pp_control(intel_dp);
pp &= ~EDP_BLC_ENABLE;
- I915_WRITE(PCH_PP_CONTROL, pp);
- POSTING_READ(PCH_PP_CONTROL);
+
+ pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
+
+ I915_WRITE(pp_ctrl_reg, pp);
+ POSTING_READ(pp_ctrl_reg);
msleep(intel_dp->backlight_off_delay);
}
@@ -2617,15 +2659,33 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev,
struct drm_i915_private *dev_priv = dev->dev_private;
struct edp_power_seq cur, vbt, spec, final;
u32 pp_on, pp_off, pp_div, pp;
+ int pp_control_reg, pp_on_reg, pp_off_reg, pp_div_reg;
+
+ if (HAS_PCH_SPLIT(dev)) {
+ pp_control_reg = PCH_PP_CONTROL;
+ pp_on_reg = PCH_PP_ON_DELAYS;
+ pp_off_reg = PCH_PP_OFF_DELAYS;
+ pp_div_reg = PCH_PP_DIVISOR;
+ } else if (IS_VALLEYVIEW(dev)) {
+ pp_control_reg = PIPEA_PP_CONTROL;
+ pp_on_reg = PIPEA_PP_ON_DELAYS;
+ pp_off_reg = PIPEA_PP_OFF_DELAYS;
+ pp_div_reg = PIPEA_PP_DIVISOR;
+ } else {
+ pp_control_reg = PP_CONTROL;
+ pp_on_reg = PP_ON_DELAYS;
+ pp_off_reg = PP_OFF_DELAYS;
+ pp_div_reg = PP_DIVISOR;
+ }
/* Workaround: Need to write PP_CONTROL with the unlock key as
* the very first thing. */
- pp = ironlake_get_pp_control(dev_priv);
- I915_WRITE(PCH_PP_CONTROL, pp);
+ pp = ironlake_get_pp_control(intel_dp);
+ I915_WRITE(pp_control_reg, pp);
- pp_on = I915_READ(PCH_PP_ON_DELAYS);
- pp_off = I915_READ(PCH_PP_OFF_DELAYS);
- pp_div = I915_READ(PCH_PP_DIVISOR);
+ pp_on = I915_READ(pp_on_reg);
+ pp_off = I915_READ(pp_off_reg);
+ pp_div = I915_READ(pp_div_reg);
/* Pull timing values out of registers */
cur.t1_t3 = (pp_on & PANEL_POWER_UP_DELAY_MASK) >>
@@ -2701,6 +2761,22 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp_on, pp_off, pp_div;
+ int div = HAS_PCH_SPLIT(dev) ? intel_pch_rawclk(dev) : intel_hrawclk(dev);
+ int pp_on_reg, pp_off_reg, pp_div_reg;
+
+ if (HAS_PCH_SPLIT(dev)) {
+ pp_on_reg = PCH_PP_ON_DELAYS;
+ pp_off_reg = PCH_PP_OFF_DELAYS;
+ pp_div_reg = PCH_PP_DIVISOR;
+ } else if (IS_VALLEYVIEW(dev)) {
+ pp_on_reg = PIPEA_PP_ON_DELAYS;
+ pp_off_reg = PIPEA_PP_OFF_DELAYS;
+ pp_div_reg = PIPEA_PP_DIVISOR;
+ } else {
+ pp_on_reg = PP_ON_DELAYS;
+ pp_off_reg = PP_OFF_DELAYS;
+ pp_div_reg = PP_DIVISOR;
+ }
/* And finally store the new values in the power sequencer. */
pp_on = (seq->t1_t3 << PANEL_POWER_UP_DELAY_SHIFT) |
@@ -2709,8 +2785,7 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
(seq->t10 << PANEL_POWER_DOWN_DELAY_SHIFT);
/* Compute the divisor for the pp clock, simply match the Bspec
* formula. */
- pp_div = ((100 * intel_pch_rawclk(dev))/2 - 1)
- << PP_REFERENCE_DIVIDER_SHIFT;
+ pp_div = ((100 * div)/2 - 1) << PP_REFERENCE_DIVIDER_SHIFT;
pp_div |= (DIV_ROUND_UP(seq->t11_t12, 1000)
<< PANEL_POWER_CYCLE_DELAY_SHIFT);
@@ -2723,14 +2798,14 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
pp_on |= PANEL_POWER_PORT_DP_D;
}
- I915_WRITE(PCH_PP_ON_DELAYS, pp_on);
- I915_WRITE(PCH_PP_OFF_DELAYS, pp_off);
- I915_WRITE(PCH_PP_DIVISOR, pp_div);
+ I915_WRITE(pp_on_reg, pp_on);
+ I915_WRITE(pp_off_reg, pp_off);
+ I915_WRITE(pp_div_reg, pp_div);
DRM_DEBUG_KMS("panel power sequencer register settings: PP_ON %#x, PP_OFF %#x, PP_DIV %#x\n",
- I915_READ(PCH_PP_ON_DELAYS),
- I915_READ(PCH_PP_OFF_DELAYS),
- I915_READ(PCH_PP_DIVISOR));
+ I915_READ(pp_on_reg),
+ I915_READ(pp_off_reg),
+ I915_READ(pp_div_reg));
}
void
--
1.7.9.5
More information about the Intel-gfx
mailing list