[Intel-gfx] [PATCH 03/10] drm/i915: add pipe_config->timings_set
Daniel Vetter
daniel at ffwll.ch
Sun Mar 3 18:58:27 CET 2013
On Tue, Feb 26, 2013 at 02:23:23PM -0300, Paulo Zanoni wrote:
> Hi
>
> 2013/2/21 Daniel Vetter <daniel.vetter at ffwll.ch>:
> > Only used by the lvds encoder. Note that we shouldn't do the same
> > simple conversion with the FORCE_6BPC flag, since that's much better
> > handled by moving all the pipe_bpc computation around.
> >
> > Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
>
> In addition to Ville's question (which makes sense):
>
> This patch does 2 things: it adds pipe_config->timings_set, but it
> also adds the encoder->compute_config function. Even though I can see
> intel_encoder->compute_config is just like drm_encoder->mode_fixup but
> with different arguments, I don't think this is a trivial thing to
> notice (imagine a future code reader, not someone looking at this
> specific patch). It would be really nice if you could add the
> compute_config callback on a separate patch and give a detailed
> documentation of the expected behavior of the function for our future
> readers. Bonus points if you could also add documentation for all the
> other intel_encoder callbacks you've created and document their
> relationship with the drm callbacks.
>
> Also, if we agree to create a separate patch for the compute_config
> callbacks, why don't we just convert all encoders to use
> compute_config instead of mode_fixup in the very first patch? Looks
> simpler to me.
The patch set is pretty old (well, a few months at least), and when I've
started it I kinda expected it to not get merged right away. So I eshewed
doing tree-wide refactorings if not required.
The second reason is that it's almost exactly the same callback as before,
the only difference is that the mode/adjusted_mode argumentes are grouped
together into pipe_config. With a few things tacked on top. So
documentation is "it's like mode_fixup, but better".
Last but not least the current pipe configuration computation code is
really hapzardous and there's a lot of interdependent stuff going on. So
right now I think nothing short of just reading the entire modeset code is
documentation enough. So I don't think adding documentation for this in
the middle of the core reorg makes much sense. I've tried to add useful
documentation for most of the new pipe_config attributes though.
Can I bribe you with the promise that I'll supply a nice blog post and
documenatation patches once the basic infrastructure has settled instead?
Cheers, Daniel
> > ---
> > drivers/gpu/drm/i915/intel_display.c | 12 +++++++++++-
> > drivers/gpu/drm/i915/intel_drv.h | 10 ++++++----
> > drivers/gpu/drm/i915/intel_lvds.c | 19 +++++++++----------
> > 3 files changed, 26 insertions(+), 15 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > index 0f61008..ad03b7f 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -3930,7 +3930,7 @@ static bool intel_crtc_compute_config(struct drm_crtc *crtc,
> > /* All interlaced capable intel hw wants timings in frames. Note though
> > * that intel_lvds_mode_fixup does some funny tricks with the crtc
> > * timings, so we need to be careful not to clobber these.*/
> > - if (!(adjusted_mode->private_flags & INTEL_MODE_CRTC_TIMINGS_SET))
> > + if (!pipe_config->timings_set)
> > drm_mode_set_crtcinfo(adjusted_mode, 0);
> >
> > /* WaPruneModeWithIncorrectHsyncOffset: Cantiga+ cannot handle modes
> > @@ -7509,6 +7509,16 @@ intel_modeset_pipe_config(struct drm_crtc *crtc,
> >
> > if (&encoder->new_crtc->base != crtc)
> > continue;
> > +
> > + if (encoder->compute_config) {
> > + if (!(encoder->compute_config(encoder, pipe_config))) {
> > + DRM_DEBUG_KMS("Encoder config failure\n");
> > + goto fail;
> > + }
> > +
> > + continue;
> > + }
> > +
> > encoder_funcs = encoder->base.helper_private;
> > if (!(encoder_funcs->mode_fixup(&encoder->base,
> > &pipe_config->requested_mode,
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > index eca75b6..edafbef 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -105,10 +105,6 @@
> > #define INTEL_MODE_PIXEL_MULTIPLIER_SHIFT (0x0)
> > #define INTEL_MODE_PIXEL_MULTIPLIER_MASK (0xf << INTEL_MODE_PIXEL_MULTIPLIER_SHIFT)
> > #define INTEL_MODE_DP_FORCE_6BPC (0x10)
> > -/* This flag must be set by the encoder's mode_fixup if it changes the crtc
> > - * timings in the mode to prevent the crtc fixup from overwriting them.
> > - * Currently only lvds needs that. */
> > -#define INTEL_MODE_CRTC_TIMINGS_SET (0x20)
> > /*
> > * Set when limited 16-235 (as opposed to full 0-255) RGB color range is
> > * to be used.
> > @@ -158,6 +154,8 @@ struct intel_encoder {
> > bool cloneable;
> > bool connectors_active;
> > void (*hot_plug)(struct intel_encoder *);
> > + bool (*compute_config)(struct intel_encoder *,
> > + struct intel_crtc_config *);
> > void (*pre_pll_enable)(struct intel_encoder *);
> > void (*pre_enable)(struct intel_encoder *);
> > void (*enable)(struct intel_encoder *);
> > @@ -202,6 +200,10 @@ struct intel_connector {
> > struct intel_crtc_config {
> > struct drm_display_mode requested_mode;
> > struct drm_display_mode adjusted_mode;
> > + /* This flag must be set by the encoder's compute_config callback if it
> > + * changes the crtc timings in the mode to prevent the crtc fixup from
> > + * overwriting them. Currently only lvds needs that. */
> > + bool timings_set;
> > };
> >
> > struct intel_crtc {
> > diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> > index 3d1d974..1616f53 100644
> > --- a/drivers/gpu/drm/i915/intel_lvds.c
> > +++ b/drivers/gpu/drm/i915/intel_lvds.c
> > @@ -261,8 +261,6 @@ centre_horizontally(struct drm_display_mode *mode,
> >
> > mode->crtc_hsync_start = mode->crtc_hblank_start + sync_pos;
> > mode->crtc_hsync_end = mode->crtc_hsync_start + sync_width;
> > -
> > - mode->private_flags |= INTEL_MODE_CRTC_TIMINGS_SET;
> > }
> >
> > static void
> > @@ -284,8 +282,6 @@ centre_vertically(struct drm_display_mode *mode,
> >
> > mode->crtc_vsync_start = mode->crtc_vblank_start + sync_pos;
> > mode->crtc_vsync_end = mode->crtc_vsync_start + sync_width;
> > -
> > - mode->private_flags |= INTEL_MODE_CRTC_TIMINGS_SET;
> > }
> >
> > static inline u32 panel_fitter_scaling(u32 source, u32 target)
> > @@ -301,15 +297,17 @@ static inline u32 panel_fitter_scaling(u32 source, u32 target)
> > return (FACTOR * ratio + FACTOR/2) / FACTOR;
> > }
> >
> > -static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
> > - const struct drm_display_mode *mode,
> > - struct drm_display_mode *adjusted_mode)
> > +static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder,
> > + struct intel_crtc_config *pipe_config)
> > {
> > - struct drm_device *dev = encoder->dev;
> > + struct drm_device *dev = intel_encoder->base.dev;
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > - struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(encoder);
> > + struct intel_lvds_encoder *lvds_encoder =
> > + to_lvds_encoder(&intel_encoder->base);
> > struct intel_connector *intel_connector =
> > &lvds_encoder->attached_connector->base;
> > + struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
> > + struct drm_display_mode *mode = &pipe_config->requested_mode;
> > struct intel_crtc *intel_crtc = lvds_encoder->base.new_crtc;
> > u32 pfit_control = 0, pfit_pgm_ratios = 0, border = 0;
> > int pipe;
> > @@ -359,6 +357,7 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
> > I915_WRITE(BCLRPAT(pipe), 0);
> >
> > drm_mode_set_crtcinfo(adjusted_mode, 0);
> > + pipe_config->timings_set = true;
> >
> > switch (intel_connector->panel.fitting_mode) {
> > case DRM_MODE_SCALE_CENTER:
> > @@ -661,7 +660,6 @@ static int intel_lvds_set_property(struct drm_connector *connector,
> > }
> >
> > static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = {
> > - .mode_fixup = intel_lvds_mode_fixup,
> > .mode_set = intel_lvds_mode_set,
> > };
> >
> > @@ -1102,6 +1100,7 @@ bool intel_lvds_init(struct drm_device *dev)
> > intel_encoder->enable = intel_enable_lvds;
> > intel_encoder->pre_enable = intel_pre_enable_lvds;
> > intel_encoder->pre_pll_enable = intel_pre_pll_enable_lvds;
> > + intel_encoder->compute_config = intel_lvds_compute_config;
> > intel_encoder->disable = intel_disable_lvds;
> > intel_encoder->get_hw_state = intel_lvds_get_hw_state;
> > intel_connector->get_hw_state = intel_connector_get_hw_state;
> > --
> > 1.7.11.4
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx at lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
>
>
> --
> Paulo Zanoni
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
More information about the Intel-gfx
mailing list