[Intel-gfx] [PATCH 04/10] drm/i915: add pipe_config->pixel_multiplier
Daniel Vetter
daniel at ffwll.ch
Sun Mar 3 19:05:37 CET 2013
On Tue, Feb 26, 2013 at 02:27:36PM -0300, Paulo Zanoni wrote:
> Hi
>
> 2013/2/21 Daniel Vetter <daniel.vetter at ffwll.ch>:
> > Used by SDVO (and hopefully, eventually HDMI, if we ever get around
> > to fixing up the low dotclock CEA modes ...).
> >
> > This required adding a new encoder->mode_set callback to be able to
> > pass around the intel_crtc_config.
>
> Again, can we please separate the callback in another patch and add
> some nice documentation explaining what's this callback, why it's
> called and what's its relationship with the other mode_set callbacks
> (again, think about future code readers, not people reading the
> patch)? Also, why not just convert every encoder to this callback
> right now?
Same reasons as for the ->compute_config part - less potential for
conflicts and it's really the same function. The only difference is that
the old ->mode_set only gets mode&adjusted mode, but since without further
changes that's all they're interested in.
On a quick survey of the final state after all patches only sdvo/tv
encoders have such a new mode_set callback. For the compute_config
callback only dvo still uses ->mode_fixup.
I guess we could convert all the leftover ones to the new interfaces once
things settle a bit. But for now I'd like to avoid changing things just
because to avoid needless conflicts.
-Daniel
>
> The pixel_multiplier part of the patch looks correct.
>
> >
> > Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
> > ---
> > drivers/gpu/drm/i915/intel_display.c | 80 +++++++++++++++++++-----------------
> > drivers/gpu/drm/i915/intel_drv.h | 19 ++-------
> > drivers/gpu/drm/i915/intel_sdvo.c | 39 +++++++++---------
> > 3 files changed, 66 insertions(+), 72 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > index ad03b7f..3446e2b 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -4280,14 +4280,15 @@ static void i9xx_update_pll_dividers(struct drm_crtc *crtc,
> > }
> >
> > static void vlv_update_pll(struct drm_crtc *crtc,
> > - struct drm_display_mode *mode,
> > - struct drm_display_mode *adjusted_mode,
> > intel_clock_t *clock, intel_clock_t *reduced_clock,
> > int num_connectors)
> > {
> > struct drm_device *dev = crtc->dev;
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> > + struct drm_display_mode *adjusted_mode =
> > + &intel_crtc->config.adjusted_mode;
> > + struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
> > int pipe = intel_crtc->pipe;
> > u32 dpll, mdiv, pdiv;
> > u32 bestn, bestm1, bestm2, bestp1, bestp2;
> > @@ -4354,11 +4355,11 @@ static void vlv_update_pll(struct drm_crtc *crtc,
> >
> > temp = 0;
> > if (is_sdvo) {
> > - temp = intel_mode_get_pixel_multiplier(adjusted_mode);
> > - if (temp > 1)
> > - temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
> > - else
> > - temp = 0;
> > + temp = 0;
> > + if (intel_crtc->config.pixel_multiplier > 1) {
> > + temp = (intel_crtc->config.pixel_multiplier - 1)
> > + << DPLL_MD_UDI_MULTIPLIER_SHIFT;
> > + }
> > }
> > I915_WRITE(DPLL_MD(pipe), temp);
> > POSTING_READ(DPLL_MD(pipe));
> > @@ -4384,14 +4385,15 @@ static void vlv_update_pll(struct drm_crtc *crtc,
> > }
> >
> > static void i9xx_update_pll(struct drm_crtc *crtc,
> > - struct drm_display_mode *mode,
> > - struct drm_display_mode *adjusted_mode,
> > intel_clock_t *clock, intel_clock_t *reduced_clock,
> > int num_connectors)
> > {
> > struct drm_device *dev = crtc->dev;
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> > + struct drm_display_mode *adjusted_mode =
> > + &intel_crtc->config.adjusted_mode;
> > + struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
> > struct intel_encoder *encoder;
> > int pipe = intel_crtc->pipe;
> > u32 dpll;
> > @@ -4408,11 +4410,12 @@ static void i9xx_update_pll(struct drm_crtc *crtc,
> > dpll |= DPLLB_MODE_LVDS;
> > else
> > dpll |= DPLLB_MODE_DAC_SERIAL;
> > +
> > if (is_sdvo) {
> > - int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
> > - if (pixel_multiplier > 1) {
> > - if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
> > - dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
> > + if ((intel_crtc->config.pixel_multiplier > 1) &&
> > + (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))) {
> > + dpll |= (intel_crtc->config.pixel_multiplier - 1)
> > + << SDVO_MULTIPLIER_SHIFT_HIRES;
> > }
> > dpll |= DPLL_DVO_HIGH_SPEED;
> > }
> > @@ -4477,11 +4480,11 @@ static void i9xx_update_pll(struct drm_crtc *crtc,
> > if (INTEL_INFO(dev)->gen >= 4) {
> > u32 temp = 0;
> > if (is_sdvo) {
> > - temp = intel_mode_get_pixel_multiplier(adjusted_mode);
> > - if (temp > 1)
> > - temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
> > - else
> > - temp = 0;
> > + temp = 0;
> > + if (intel_crtc->config.pixel_multiplier > 1) {
> > + temp = (intel_crtc->config.pixel_multiplier - 1)
> > + << DPLL_MD_UDI_MULTIPLIER_SHIFT;
> > + }
> > }
> > I915_WRITE(DPLL_MD(pipe), temp);
> > } else {
> > @@ -4691,11 +4694,11 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
> > has_reduced_clock ? &reduced_clock : NULL,
> > num_connectors);
> > else if (IS_VALLEYVIEW(dev))
> > - vlv_update_pll(crtc, mode, adjusted_mode, &clock,
> > + vlv_update_pll(crtc, &clock,
> > has_reduced_clock ? &reduced_clock : NULL,
> > num_connectors);
> > else
> > - i9xx_update_pll(crtc, mode, adjusted_mode, &clock,
> > + i9xx_update_pll(crtc, &clock,
> > has_reduced_clock ? &reduced_clock : NULL,
> > num_connectors);
> >
> > @@ -5407,17 +5410,18 @@ int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp)
> > return bps / (link_bw * 8) + 1;
> > }
> >
> > -static void ironlake_set_m_n(struct drm_crtc *crtc,
> > - struct drm_display_mode *mode,
> > - struct drm_display_mode *adjusted_mode)
> > +static void ironlake_set_m_n(struct drm_crtc *crtc)
> > {
> > struct drm_device *dev = crtc->dev;
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> > + struct drm_display_mode *adjusted_mode =
> > + &intel_crtc->config.adjusted_mode;
> > + struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
> > enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
> > struct intel_encoder *intel_encoder, *edp_encoder = NULL;
> > struct intel_link_m_n m_n = {0};
> > - int target_clock, pixel_multiplier, lane, link_bw;
> > + int target_clock, lane, link_bw;
> > bool is_dp = false, is_cpu_edp = false;
> >
> > for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
> > @@ -5435,7 +5439,6 @@ static void ironlake_set_m_n(struct drm_crtc *crtc,
> > }
> >
> > /* FDI link */
> > - pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
> > lane = 0;
> > /* CPU eDP doesn't require FDI link, so just set DP M/N
> > according to current link config */
> > @@ -5466,8 +5469,8 @@ static void ironlake_set_m_n(struct drm_crtc *crtc,
> >
> > intel_crtc->fdi_lanes = lane;
> >
> > - if (pixel_multiplier > 1)
> > - link_bw *= pixel_multiplier;
> > + if (intel_crtc->config.pixel_multiplier > 1)
> > + link_bw *= intel_crtc->config.pixel_multiplier;
> > intel_link_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw, &m_n);
> >
> > I915_WRITE(PIPE_DATA_M1(cpu_transcoder), TU_SIZE(m_n.tu) | m_n.gmch_m);
> > @@ -5477,7 +5480,6 @@ static void ironlake_set_m_n(struct drm_crtc *crtc,
> > }
> >
> > static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
> > - struct drm_display_mode *adjusted_mode,
> > intel_clock_t *clock, u32 fp)
> > {
> > struct drm_crtc *crtc = &intel_crtc->base;
> > @@ -5485,7 +5487,7 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > struct intel_encoder *intel_encoder;
> > uint32_t dpll;
> > - int factor, pixel_multiplier, num_connectors = 0;
> > + int factor, num_connectors = 0;
> > bool is_lvds = false, is_sdvo = false, is_tv = false;
> > bool is_dp = false, is_cpu_edp = false;
> >
> > @@ -5536,9 +5538,9 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
> > else
> > dpll |= DPLLB_MODE_DAC_SERIAL;
> > if (is_sdvo) {
> > - pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
> > - if (pixel_multiplier > 1) {
> > - dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
> > + if (intel_crtc->config.pixel_multiplier > 1) {
> > + dpll |= (intel_crtc->config.pixel_multiplier - 1)
> > + << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
> > }
> > dpll |= DPLL_DVO_HIGH_SPEED;
> > }
> > @@ -5642,7 +5644,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
> > fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
> > reduced_clock.m2;
> >
> > - dpll = ironlake_compute_dpll(intel_crtc, adjusted_mode, &clock, fp);
> > + dpll = ironlake_compute_dpll(intel_crtc, &clock, fp);
> >
> > DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
> > drm_mode_debug_printmodeline(mode);
> > @@ -5696,7 +5698,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
> >
> > /* Note, this also computes intel_crtc->fdi_lanes which is used below in
> > * ironlake_check_fdi_lanes. */
> > - ironlake_set_m_n(crtc, mode, adjusted_mode);
> > + ironlake_set_m_n(crtc);
> >
> > fdi_config_ok = ironlake_check_fdi_lanes(intel_crtc);
> >
> > @@ -5812,7 +5814,7 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
> > intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
> >
> > if (!is_dp || is_cpu_edp)
> > - ironlake_set_m_n(crtc, mode, adjusted_mode);
> > + ironlake_set_m_n(crtc);
> >
> > haswell_set_pipeconf(crtc, adjusted_mode, dither);
> >
> > @@ -5865,8 +5867,12 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
> > encoder->base.base.id,
> > drm_get_encoder_name(&encoder->base),
> > mode->base.id, mode->name);
> > - encoder_funcs = encoder->base.helper_private;
> > - encoder_funcs->mode_set(&encoder->base, mode, adjusted_mode);
> > + if (encoder->mode_set) {
> > + encoder->mode_set(encoder);
> > + } else {
> > + encoder_funcs = encoder->base.helper_private;
> > + encoder_funcs->mode_set(&encoder->base, mode, adjusted_mode);
> > + }
> > }
> >
> > return 0;
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > index edafbef..ef5111b 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -102,8 +102,6 @@
> > #define INTEL_DVO_CHIP_TVOUT 4
> >
> > /* drm_display_mode->private_flags */
> > -#define INTEL_MODE_PIXEL_MULTIPLIER_SHIFT (0x0)
> > -#define INTEL_MODE_PIXEL_MULTIPLIER_MASK (0xf << INTEL_MODE_PIXEL_MULTIPLIER_SHIFT)
> > #define INTEL_MODE_DP_FORCE_6BPC (0x10)
> > /*
> > * Set when limited 16-235 (as opposed to full 0-255) RGB color range is
> > @@ -111,20 +109,6 @@
> > */
> > #define INTEL_MODE_LIMITED_COLOR_RANGE (0x40)
> >
> > -static inline void
> > -intel_mode_set_pixel_multiplier(struct drm_display_mode *mode,
> > - int multiplier)
> > -{
> > - mode->clock *= multiplier;
> > - mode->private_flags |= multiplier;
> > -}
> > -
> > -static inline int
> > -intel_mode_get_pixel_multiplier(const struct drm_display_mode *mode)
> > -{
> > - return (mode->private_flags & INTEL_MODE_PIXEL_MULTIPLIER_MASK) >> INTEL_MODE_PIXEL_MULTIPLIER_SHIFT;
> > -}
> > -
> > struct intel_framebuffer {
> > struct drm_framebuffer base;
> > struct drm_i915_gem_object *obj;
> > @@ -159,6 +143,7 @@ struct intel_encoder {
> > void (*pre_pll_enable)(struct intel_encoder *);
> > void (*pre_enable)(struct intel_encoder *);
> > void (*enable)(struct intel_encoder *);
> > + void (*mode_set)(struct intel_encoder *intel_encoder);
> > void (*disable)(struct intel_encoder *);
> > void (*post_disable)(struct intel_encoder *);
> > /* Read out the current hw state of this connector, returning true if
> > @@ -204,6 +189,8 @@ struct intel_crtc_config {
> > * changes the crtc timings in the mode to prevent the crtc fixup from
> > * overwriting them. Currently only lvds needs that. */
> > bool timings_set;
> > + /* Used by SDVO (and if we ever fix it, HDMI). */
> > + unsigned pixel_multiplier;
> > };
> >
> > struct intel_crtc {
> > diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
> > index 33b46d9..06bb2e1 100644
> > --- a/drivers/gpu/drm/i915/intel_sdvo.c
> > +++ b/drivers/gpu/drm/i915/intel_sdvo.c
> > @@ -788,7 +788,6 @@ static void intel_sdvo_get_dtd_from_mode(struct intel_sdvo_dtd *dtd,
> > v_sync_offset = mode->vsync_start - mode->vdisplay;
> >
> > mode_clock = mode->clock;
> > - mode_clock /= intel_mode_get_pixel_multiplier(mode) ?: 1;
> > mode_clock /= 10;
> > dtd->part1.clock = mode_clock;
> >
> > @@ -1039,12 +1038,12 @@ intel_sdvo_get_preferred_input_mode(struct intel_sdvo *intel_sdvo,
> > return true;
> > }
> >
> > -static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
> > - const struct drm_display_mode *mode,
> > - struct drm_display_mode *adjusted_mode)
> > +static bool intel_sdvo_compute_config(struct intel_encoder *encoder,
> > + struct intel_crtc_config *pipe_config)
> > {
> > - struct intel_sdvo *intel_sdvo = to_intel_sdvo(encoder);
> > - int multiplier;
> > + struct intel_sdvo *intel_sdvo = to_intel_sdvo(&encoder->base);
> > + struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
> > + struct drm_display_mode *mode = &pipe_config->requested_mode;
> >
> > /* We need to construct preferred input timings based on our
> > * output timings. To do that, we have to set the output
> > @@ -1071,8 +1070,9 @@ static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
> > /* Make the CRTC code factor in the SDVO pixel multiplier. The
> > * SDVO device will factor out the multiplier during mode_set.
> > */
> > - multiplier = intel_sdvo_get_pixel_multiplier(adjusted_mode);
> > - intel_mode_set_pixel_multiplier(adjusted_mode, multiplier);
> > + pipe_config->pixel_multiplier =
> > + intel_sdvo_get_pixel_multiplier(adjusted_mode);
> > + adjusted_mode->clock *= pipe_config->pixel_multiplier;
> >
> > if (intel_sdvo->color_range_auto) {
> > /* See CEA-861-E - 5.1 Default Encoding Parameters */
> > @@ -1089,19 +1089,19 @@ static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
> > return true;
> > }
> >
> > -static void intel_sdvo_mode_set(struct drm_encoder *encoder,
> > - struct drm_display_mode *mode,
> > - struct drm_display_mode *adjusted_mode)
> > +static void intel_sdvo_mode_set(struct intel_encoder *intel_encoder)
> > {
> > - struct drm_device *dev = encoder->dev;
> > + struct drm_device *dev = intel_encoder->base.dev;
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > - struct drm_crtc *crtc = encoder->crtc;
> > + struct drm_crtc *crtc = intel_encoder->base.crtc;
> > struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> > - struct intel_sdvo *intel_sdvo = to_intel_sdvo(encoder);
> > + struct drm_display_mode *adjusted_mode =
> > + &intel_crtc->config.adjusted_mode;
> > + struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
> > + struct intel_sdvo *intel_sdvo = to_intel_sdvo(&intel_encoder->base);
> > u32 sdvox;
> > struct intel_sdvo_in_out_map in_out;
> > struct intel_sdvo_dtd input_dtd, output_dtd;
> > - int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
> > int rate;
> >
> > if (!mode)
> > @@ -1161,7 +1161,7 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
> > DRM_INFO("Setting input timings on %s failed\n",
> > SDVO_NAME(intel_sdvo));
> >
> > - switch (pixel_multiplier) {
> > + switch (intel_crtc->config.pixel_multiplier) {
> > default:
> > case 1: rate = SDVO_CLOCK_RATE_MULT_1X; break;
> > case 2: rate = SDVO_CLOCK_RATE_MULT_2X; break;
> > @@ -1205,7 +1205,8 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
> > } else if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
> > /* done in crtc_mode_set as it lives inside the dpll register */
> > } else {
> > - sdvox |= (pixel_multiplier - 1) << SDVO_PORT_MULTIPLY_SHIFT;
> > + sdvox |= (intel_crtc->config.pixel_multiplier - 1)
> > + << SDVO_PORT_MULTIPLY_SHIFT;
> > }
> >
> > if (input_dtd.part2.sdvo_flags & SDVO_NEED_TO_STALL &&
> > @@ -2041,8 +2042,6 @@ done:
> > }
> >
> > static const struct drm_encoder_helper_funcs intel_sdvo_helper_funcs = {
> > - .mode_fixup = intel_sdvo_mode_fixup,
> > - .mode_set = intel_sdvo_mode_set,
> > };
> >
> > static const struct drm_connector_funcs intel_sdvo_connector_funcs = {
> > @@ -2781,7 +2780,9 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
> >
> > drm_encoder_helper_add(&intel_encoder->base, &intel_sdvo_helper_funcs);
> >
> > + intel_encoder->compute_config = intel_sdvo_compute_config;
> > intel_encoder->disable = intel_disable_sdvo;
> > + intel_encoder->mode_set = intel_sdvo_mode_set;
> > intel_encoder->enable = intel_enable_sdvo;
> > intel_encoder->get_hw_state = intel_sdvo_get_hw_state;
> >
> > --
> > 1.7.11.4
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx at lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
>
>
> --
> Paulo Zanoni
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
More information about the Intel-gfx
mailing list