[Intel-gfx] [PATCH 04/13] drm/i915: add pipe_config->pixel_multiplier
Daniel Vetter
daniel.vetter at ffwll.ch
Wed Mar 27 00:44:53 CET 2013
Used by SDVO (and hopefully, eventually HDMI, if we ever get around
to fixing up the low dotclock CEA modes ...).
This required adding a new encoder->mode_set callback to be able to
pass around the intel_crtc_config.
Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
drivers/gpu/drm/i915/intel_display.c | 80 +++++++++++++++++++-----------------
drivers/gpu/drm/i915/intel_drv.h | 19 ++-------
drivers/gpu/drm/i915/intel_sdvo.c | 39 +++++++++---------
3 files changed, 66 insertions(+), 72 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3e22305..3672b8d 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4320,14 +4320,15 @@ static void i9xx_update_pll_dividers(struct drm_crtc *crtc,
}
static void vlv_update_pll(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
intel_clock_t *clock, intel_clock_t *reduced_clock,
int num_connectors)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_display_mode *adjusted_mode =
+ &intel_crtc->config.adjusted_mode;
+ struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
int pipe = intel_crtc->pipe;
u32 dpll, mdiv, pdiv;
u32 bestn, bestm1, bestm2, bestp1, bestp2;
@@ -4394,11 +4395,11 @@ static void vlv_update_pll(struct drm_crtc *crtc,
temp = 0;
if (is_sdvo) {
- temp = intel_mode_get_pixel_multiplier(adjusted_mode);
- if (temp > 1)
- temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
- else
- temp = 0;
+ temp = 0;
+ if (intel_crtc->config.pixel_multiplier > 1) {
+ temp = (intel_crtc->config.pixel_multiplier - 1)
+ << DPLL_MD_UDI_MULTIPLIER_SHIFT;
+ }
}
I915_WRITE(DPLL_MD(pipe), temp);
POSTING_READ(DPLL_MD(pipe));
@@ -4424,14 +4425,15 @@ static void vlv_update_pll(struct drm_crtc *crtc,
}
static void i9xx_update_pll(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
intel_clock_t *clock, intel_clock_t *reduced_clock,
int num_connectors)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_display_mode *adjusted_mode =
+ &intel_crtc->config.adjusted_mode;
+ struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
u32 dpll;
@@ -4448,11 +4450,12 @@ static void i9xx_update_pll(struct drm_crtc *crtc,
dpll |= DPLLB_MODE_LVDS;
else
dpll |= DPLLB_MODE_DAC_SERIAL;
+
if (is_sdvo) {
- int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
- if (pixel_multiplier > 1) {
- if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
- dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
+ if ((intel_crtc->config.pixel_multiplier > 1) &&
+ (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))) {
+ dpll |= (intel_crtc->config.pixel_multiplier - 1)
+ << SDVO_MULTIPLIER_SHIFT_HIRES;
}
dpll |= DPLL_DVO_HIGH_SPEED;
}
@@ -4517,11 +4520,11 @@ static void i9xx_update_pll(struct drm_crtc *crtc,
if (INTEL_INFO(dev)->gen >= 4) {
u32 temp = 0;
if (is_sdvo) {
- temp = intel_mode_get_pixel_multiplier(adjusted_mode);
- if (temp > 1)
- temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
- else
- temp = 0;
+ temp = 0;
+ if (intel_crtc->config.pixel_multiplier > 1) {
+ temp = (intel_crtc->config.pixel_multiplier - 1)
+ << DPLL_MD_UDI_MULTIPLIER_SHIFT;
+ }
}
I915_WRITE(DPLL_MD(pipe), temp);
} else {
@@ -4731,11 +4734,11 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
has_reduced_clock ? &reduced_clock : NULL,
num_connectors);
else if (IS_VALLEYVIEW(dev))
- vlv_update_pll(crtc, mode, adjusted_mode, &clock,
+ vlv_update_pll(crtc, &clock,
has_reduced_clock ? &reduced_clock : NULL,
num_connectors);
else
- i9xx_update_pll(crtc, mode, adjusted_mode, &clock,
+ i9xx_update_pll(crtc, &clock,
has_reduced_clock ? &reduced_clock : NULL,
num_connectors);
@@ -5449,17 +5452,18 @@ int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp)
return bps / (link_bw * 8) + 1;
}
-static void ironlake_set_m_n(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
+static void ironlake_set_m_n(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_display_mode *adjusted_mode =
+ &intel_crtc->config.adjusted_mode;
+ struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
struct intel_encoder *intel_encoder, *edp_encoder = NULL;
struct intel_link_m_n m_n = {0};
- int target_clock, pixel_multiplier, lane, link_bw;
+ int target_clock, lane, link_bw;
bool is_dp = false, is_cpu_edp = false;
for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
@@ -5477,7 +5481,6 @@ static void ironlake_set_m_n(struct drm_crtc *crtc,
}
/* FDI link */
- pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
lane = 0;
/* CPU eDP doesn't require FDI link, so just set DP M/N
according to current link config */
@@ -5508,8 +5511,8 @@ static void ironlake_set_m_n(struct drm_crtc *crtc,
intel_crtc->fdi_lanes = lane;
- if (pixel_multiplier > 1)
- link_bw *= pixel_multiplier;
+ if (intel_crtc->config.pixel_multiplier > 1)
+ link_bw *= intel_crtc->config.pixel_multiplier;
intel_link_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw, &m_n);
I915_WRITE(PIPE_DATA_M1(cpu_transcoder), TU_SIZE(m_n.tu) | m_n.gmch_m);
@@ -5519,7 +5522,6 @@ static void ironlake_set_m_n(struct drm_crtc *crtc,
}
static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
- struct drm_display_mode *adjusted_mode,
intel_clock_t *clock, u32 fp)
{
struct drm_crtc *crtc = &intel_crtc->base;
@@ -5527,7 +5529,7 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_encoder *intel_encoder;
uint32_t dpll;
- int factor, pixel_multiplier, num_connectors = 0;
+ int factor, num_connectors = 0;
bool is_lvds = false, is_sdvo = false, is_tv = false;
bool is_dp = false, is_cpu_edp = false;
@@ -5578,9 +5580,9 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
else
dpll |= DPLLB_MODE_DAC_SERIAL;
if (is_sdvo) {
- pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
- if (pixel_multiplier > 1) {
- dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
+ if (intel_crtc->config.pixel_multiplier > 1) {
+ dpll |= (intel_crtc->config.pixel_multiplier - 1)
+ << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
}
dpll |= DPLL_DVO_HIGH_SPEED;
}
@@ -5684,7 +5686,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
reduced_clock.m2;
- dpll = ironlake_compute_dpll(intel_crtc, adjusted_mode, &clock, fp);
+ dpll = ironlake_compute_dpll(intel_crtc, &clock, fp);
DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
drm_mode_debug_printmodeline(mode);
@@ -5738,7 +5740,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
/* Note, this also computes intel_crtc->fdi_lanes which is used below in
* ironlake_check_fdi_lanes. */
- ironlake_set_m_n(crtc, mode, adjusted_mode);
+ ironlake_set_m_n(crtc);
fdi_config_ok = ironlake_check_fdi_lanes(intel_crtc);
@@ -5859,7 +5861,7 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
if (!is_dp || is_cpu_edp)
- ironlake_set_m_n(crtc, mode, adjusted_mode);
+ ironlake_set_m_n(crtc);
haswell_set_pipeconf(crtc, adjusted_mode, dither);
@@ -5907,8 +5909,12 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
encoder->base.base.id,
drm_get_encoder_name(&encoder->base),
mode->base.id, mode->name);
- encoder_funcs = encoder->base.helper_private;
- encoder_funcs->mode_set(&encoder->base, mode, adjusted_mode);
+ if (encoder->mode_set) {
+ encoder->mode_set(encoder);
+ } else {
+ encoder_funcs = encoder->base.helper_private;
+ encoder_funcs->mode_set(&encoder->base, mode, adjusted_mode);
+ }
}
return 0;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 054032a..f0e5462 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -102,8 +102,6 @@
#define INTEL_DVO_CHIP_TVOUT 4
/* drm_display_mode->private_flags */
-#define INTEL_MODE_PIXEL_MULTIPLIER_SHIFT (0x0)
-#define INTEL_MODE_PIXEL_MULTIPLIER_MASK (0xf << INTEL_MODE_PIXEL_MULTIPLIER_SHIFT)
#define INTEL_MODE_DP_FORCE_6BPC (0x10)
/*
* Set when limited 16-235 (as opposed to full 0-255) RGB color range is
@@ -111,20 +109,6 @@
*/
#define INTEL_MODE_LIMITED_COLOR_RANGE (0x40)
-static inline void
-intel_mode_set_pixel_multiplier(struct drm_display_mode *mode,
- int multiplier)
-{
- mode->clock *= multiplier;
- mode->private_flags |= multiplier;
-}
-
-static inline int
-intel_mode_get_pixel_multiplier(const struct drm_display_mode *mode)
-{
- return (mode->private_flags & INTEL_MODE_PIXEL_MULTIPLIER_MASK) >> INTEL_MODE_PIXEL_MULTIPLIER_SHIFT;
-}
-
struct intel_framebuffer {
struct drm_framebuffer base;
struct drm_i915_gem_object *obj;
@@ -159,6 +143,7 @@ struct intel_encoder {
void (*pre_pll_enable)(struct intel_encoder *);
void (*pre_enable)(struct intel_encoder *);
void (*enable)(struct intel_encoder *);
+ void (*mode_set)(struct intel_encoder *intel_encoder);
void (*disable)(struct intel_encoder *);
void (*post_disable)(struct intel_encoder *);
/* Read out the current hw state of this connector, returning true if
@@ -205,6 +190,8 @@ struct intel_crtc_config {
* changes the crtc timings in the mode to prevent the crtc fixup from
* overwriting them. Currently only lvds needs that. */
bool timings_set;
+ /* Used by SDVO (and if we ever fix it, HDMI). */
+ unsigned pixel_multiplier;
};
struct intel_crtc {
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 8fdd8f8..4d9fede 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -788,7 +788,6 @@ static void intel_sdvo_get_dtd_from_mode(struct intel_sdvo_dtd *dtd,
v_sync_offset = mode->vsync_start - mode->vdisplay;
mode_clock = mode->clock;
- mode_clock /= intel_mode_get_pixel_multiplier(mode) ?: 1;
mode_clock /= 10;
dtd->part1.clock = mode_clock;
@@ -1041,12 +1040,12 @@ intel_sdvo_get_preferred_input_mode(struct intel_sdvo *intel_sdvo,
return true;
}
-static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
- const struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
+static bool intel_sdvo_compute_config(struct intel_encoder *encoder,
+ struct intel_crtc_config *pipe_config)
{
- struct intel_sdvo *intel_sdvo = to_intel_sdvo(encoder);
- int multiplier;
+ struct intel_sdvo *intel_sdvo = to_intel_sdvo(&encoder->base);
+ struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
+ struct drm_display_mode *mode = &pipe_config->requested_mode;
/* We need to construct preferred input timings based on our
* output timings. To do that, we have to set the output
@@ -1073,8 +1072,9 @@ static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
/* Make the CRTC code factor in the SDVO pixel multiplier. The
* SDVO device will factor out the multiplier during mode_set.
*/
- multiplier = intel_sdvo_get_pixel_multiplier(adjusted_mode);
- intel_mode_set_pixel_multiplier(adjusted_mode, multiplier);
+ pipe_config->pixel_multiplier =
+ intel_sdvo_get_pixel_multiplier(adjusted_mode);
+ adjusted_mode->clock *= pipe_config->pixel_multiplier;
if (intel_sdvo->color_range_auto) {
/* See CEA-861-E - 5.1 Default Encoding Parameters */
@@ -1093,19 +1093,19 @@ static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
return true;
}
-static void intel_sdvo_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
+static void intel_sdvo_mode_set(struct intel_encoder *intel_encoder)
{
- struct drm_device *dev = encoder->dev;
+ struct drm_device *dev = intel_encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct drm_crtc *crtc = encoder->crtc;
+ struct drm_crtc *crtc = intel_encoder->base.crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- struct intel_sdvo *intel_sdvo = to_intel_sdvo(encoder);
+ struct drm_display_mode *adjusted_mode =
+ &intel_crtc->config.adjusted_mode;
+ struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
+ struct intel_sdvo *intel_sdvo = to_intel_sdvo(&intel_encoder->base);
u32 sdvox;
struct intel_sdvo_in_out_map in_out;
struct intel_sdvo_dtd input_dtd, output_dtd;
- int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
int rate;
if (!mode)
@@ -1165,7 +1165,7 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
DRM_INFO("Setting input timings on %s failed\n",
SDVO_NAME(intel_sdvo));
- switch (pixel_multiplier) {
+ switch (intel_crtc->config.pixel_multiplier) {
default:
case 1: rate = SDVO_CLOCK_RATE_MULT_1X; break;
case 2: rate = SDVO_CLOCK_RATE_MULT_2X; break;
@@ -1209,7 +1209,8 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
} else if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
/* done in crtc_mode_set as it lives inside the dpll register */
} else {
- sdvox |= (pixel_multiplier - 1) << SDVO_PORT_MULTIPLY_SHIFT;
+ sdvox |= (intel_crtc->config.pixel_multiplier - 1)
+ << SDVO_PORT_MULTIPLY_SHIFT;
}
if (input_dtd.part2.sdvo_flags & SDVO_NEED_TO_STALL &&
@@ -2041,8 +2042,6 @@ done:
}
static const struct drm_encoder_helper_funcs intel_sdvo_helper_funcs = {
- .mode_fixup = intel_sdvo_mode_fixup,
- .mode_set = intel_sdvo_mode_set,
};
static const struct drm_connector_funcs intel_sdvo_connector_funcs = {
@@ -2787,7 +2786,9 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
drm_encoder_helper_add(&intel_encoder->base, &intel_sdvo_helper_funcs);
+ intel_encoder->compute_config = intel_sdvo_compute_config;
intel_encoder->disable = intel_disable_sdvo;
+ intel_encoder->mode_set = intel_sdvo_mode_set;
intel_encoder->enable = intel_enable_sdvo;
intel_encoder->get_hw_state = intel_sdvo_get_hw_state;
--
1.7.11.7
More information about the Intel-gfx
mailing list