[Intel-gfx] [PATCH 5/8] drm/i915: add hw state readout/checking for pipe_config
Daniel Vetter
daniel.vetter at ffwll.ch
Thu Mar 28 10:42:00 CET 2013
We need to be able to read out the hw state code for a bunch
of reasons:
- Correctly disabling boot-up/resume state.
- Pure paranoia.
Since not all of the pipe configuration is e.g. relevant for
fastboot (or at least we can allow some wiggle room in some
parameters, like the clocks), we need to add a strict_checking
parameter to intel_pipe_config_compare for fastboot.
For now intel_pipe_config_compare should be fully paranoid and
check everything that the hw state readout code supports. Which
for this infrastructure code is nothing.
I've gone a bit overboard with adding 3 get_pipe_config functions:
The ilk version will differ with the next patch, so it's not too
onerous.
v2: Don't check the hw config if the pipe is off, since an enabled,
but dpms off crtc will obviously have tons of difference with the hw
state.
Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
drivers/gpu/drm/i915/i915_drv.h | 5 +++
drivers/gpu/drm/i915/intel_display.c | 77 +++++++++++++++++++++++++++++++-----
2 files changed, 72 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 86777c8..99d7f81 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -285,6 +285,7 @@ struct drm_i915_error_state {
};
struct intel_crtc_config;
+struct intel_crtc;
struct drm_i915_display_funcs {
bool (*fbc_enabled)(struct drm_device *dev);
@@ -298,6 +299,10 @@ struct drm_i915_display_funcs {
void (*update_linetime_wm)(struct drm_device *dev, int pipe,
struct drm_display_mode *mode);
void (*modeset_global_resources)(struct drm_device *dev);
+ /* Returns the active state of the crtc, and if the crtc is active,
+ * fills out the pipe-config with the hw state. */
+ bool (*get_pipe_config)(struct intel_crtc *,
+ struct intel_crtc_config *);
int (*crtc_mode_set)(struct drm_crtc *crtc,
int x, int y,
struct drm_framebuffer *old_fb);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index e925efe..a5adaa0 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4695,6 +4695,20 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
return ret;
}
+static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
+ struct intel_crtc_config *pipe_config)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t tmp;
+
+ tmp = I915_READ(PIPECONF(crtc->pipe));
+ if (!(tmp & PIPECONF_ENABLE))
+ return false;
+
+ return true;
+}
+
static void ironlake_init_pch_refclk(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -5355,7 +5369,6 @@ static void ironlake_fdi_set_m_n(struct drm_crtc *crtc)
&intel_crtc->config.adjusted_mode;
struct intel_link_m_n m_n = {0};
int target_clock, lane, link_bw;
- uint32_t bps;
/* FDI is a binary signal running at ~2.7GHz, encoding
* each output octet as 10 bits. The actual frequency
@@ -5611,6 +5624,20 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
return fdi_config_ok ? ret : -EINVAL;
}
+static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
+ struct intel_crtc_config *pipe_config)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t tmp;
+
+ tmp = I915_READ(PIPECONF(crtc->pipe));
+ if (!(tmp & PIPECONF_ENABLE))
+ return false;
+
+ return true;
+}
+
static void haswell_modeset_global_resources(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -5725,6 +5752,20 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
return ret;
}
+static bool haswell_get_pipe_config(struct intel_crtc *crtc,
+ struct intel_crtc_config *pipe_config)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t tmp;
+
+ tmp = I915_READ(PIPECONF(crtc->cpu_transcoder));
+ if (!(tmp & PIPECONF_ENABLE))
+ return false;
+
+ return true;
+}
+
static int intel_crtc_mode_set(struct drm_crtc *crtc,
int x, int y,
struct drm_framebuffer *fb)
@@ -7647,12 +7688,21 @@ intel_modeset_update_state(struct drm_device *dev, unsigned prepare_pipes)
base.head) \
if (mask & (1 <<(intel_crtc)->pipe)) \
+static bool
+intel_pipe_config_compare(struct intel_crtc_config *current_config,
+ struct intel_crtc_config *pipe_config)
+{
+ return true;
+}
+
void
intel_modeset_check_state(struct drm_device *dev)
{
+ drm_i915_private_t *dev_priv = dev->dev_private;
struct intel_crtc *crtc;
struct intel_encoder *encoder;
struct intel_connector *connector;
+ struct intel_crtc_config pipe_config;
list_for_each_entry(connector, &dev->mode_config.connector_list,
base.head) {
@@ -7741,7 +7791,15 @@ intel_modeset_check_state(struct drm_device *dev)
"crtc's computed enabled state doesn't match tracked enabled state "
"(expected %i, found %i)\n", enabled, crtc->base.enabled);
- assert_pipe(dev->dev_private, crtc->pipe, crtc->active);
+ active = dev_priv->display.get_pipe_config(crtc,
+ &pipe_config);
+ WARN(crtc->active != active,
+ "crtc active state doesn't match with hw state "
+ "(expected %i, found %i)\n", crtc->active, active);
+
+ WARN(active &&
+ !intel_pipe_config_compare(&crtc->config, &pipe_config),
+ "pipe state doesn't match!\n");
}
}
@@ -8549,18 +8607,21 @@ static void intel_init_display(struct drm_device *dev)
struct drm_i915_private *dev_priv = dev->dev_private;
if (HAS_DDI(dev)) {
+ dev_priv->display.get_pipe_config = haswell_get_pipe_config;
dev_priv->display.crtc_mode_set = haswell_crtc_mode_set;
dev_priv->display.crtc_enable = haswell_crtc_enable;
dev_priv->display.crtc_disable = haswell_crtc_disable;
dev_priv->display.off = haswell_crtc_off;
dev_priv->display.update_plane = ironlake_update_plane;
} else if (HAS_PCH_SPLIT(dev)) {
+ dev_priv->display.get_pipe_config = ironlake_get_pipe_config;
dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set;
dev_priv->display.crtc_enable = ironlake_crtc_enable;
dev_priv->display.crtc_disable = ironlake_crtc_disable;
dev_priv->display.off = ironlake_crtc_off;
dev_priv->display.update_plane = ironlake_update_plane;
} else {
+ dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
dev_priv->display.crtc_enable = i9xx_crtc_enable;
dev_priv->display.crtc_disable = i9xx_crtc_disable;
@@ -9092,14 +9153,10 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
}
setup_pipes:
- for_each_pipe(pipe) {
- crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
-
- tmp = I915_READ(PIPECONF(crtc->cpu_transcoder));
- if (tmp & PIPECONF_ENABLE)
- crtc->active = true;
- else
- crtc->active = false;
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list,
+ base.head) {
+ crtc->active = dev_priv->display.get_pipe_config(crtc,
+ &crtc->config);
crtc->base.enabled = crtc->active;
--
1.7.11.7
More information about the Intel-gfx
mailing list