[Intel-gfx] [PATCH 1/2] drm/i915: Use pipe_config state to disable ilk+ pfit

[Daniel Vetter]

No more need to guard the write with a power well check on Haswell now
that we have proper pfit state readout: We can simply only clear the
pfit if it's actually on.

This removes some duplication of knowledge between the haswell pfit
disable and pfit state readout code about.

While at it extract a little helper for this.

Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c | 28 +++++++++++++++++-----------
 1 file changed, 17 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 58395e3..d7f2eaa 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3399,6 +3399,21 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
 	intel_wait_for_vblank(dev, intel_crtc->pipe);
 }
 
+static void ironlake_pfit_disable(struct intel_crtc *crtc)
+{
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int pipe = crtc->pipe;
+
+	/* To avoid upsetting the power well on haswell only disable the pfit if
+	 * it's in use. The hw state code will make sure we get this right. */
+	if (crtc->config.pch_pfit.size) {
+		I915_WRITE(PF_CTL(pipe), 0);
+		I915_WRITE(PF_WIN_POS(pipe), 0);
+		I915_WRITE(PF_WIN_SZ(pipe), 0);
+	}
+}
+
 static void ironlake_crtc_disable(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
@@ -3428,9 +3443,7 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
 	intel_set_pch_fifo_underrun_reporting(dev, pipe, false);
 	intel_disable_pipe(dev_priv, pipe);
 
-	/* Disable PF */
-	I915_WRITE(PF_CTL(pipe), 0);
-	I915_WRITE(PF_WIN_SZ(pipe), 0);
+	ironlake_pfit_disable(intel_crtc);
 
 	for_each_encoder_on_crtc(dev, crtc, encoder)
 		if (encoder->post_disable)
@@ -3512,14 +3525,7 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
 
 	intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder);
 
-	/* XXX: Once we have proper panel fitter state tracking implemented with
-	 * hardware state read/check support we should switch to only disable
-	 * the panel fitter when we know it's used. */
-	if (intel_display_power_enabled(dev,
-					POWER_DOMAIN_PIPE_PANEL_FITTER(pipe))) {
-		I915_WRITE(PF_CTL(pipe), 0);
-		I915_WRITE(PF_WIN_SZ(pipe), 0);
-	}
+	ironlake_pfit_disable(intel_crtc);
 
 	intel_ddi_disable_pipe_clock(intel_crtc);
 
-- 
1.7.11.7