[Intel-gfx] [PATCH] drm/i915: fetch PCH PLL state at init time v2

[Jesse Barnes]

We need to properly track PCH PLL sharing configs, and generally set up
PCH PLL state at init time as part of the state readout process.

v2: update to new code, use intel_crtc instead (Jesse)

I-told-you-so-by: Daniel Vetter <daniel.vetter at ffwll.ch>
Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
---
 drivers/gpu/drm/i915/intel_display.c |   48 +++++++++++++++++++++++++++++++++-
 1 file changed, 47 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index dda4501..2e7a5bb 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -6974,6 +6974,49 @@ static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
 	pipe_config->adjusted_mode.clock = clock.dot;
 }
 
+static void ironlake_crtc_pll_get(struct intel_crtc *crtc)
+{
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 dpll_sel;
+
+	if (HAS_PCH_IBX(dev_priv->dev))
+		crtc->pch_pll = &dev_priv->pch_plls[crtc->pipe];
+
+	if (HAS_PCH_CPT(dev_priv->dev)) {
+		dpll_sel = I915_READ(PCH_DPLL_SEL);
+
+		switch (crtc->pipe) {
+		case PIPE_A:
+			if ((dpll_sel & TRANSA_DPLL_ENABLE) &&
+			    (dpll_sel & TRANSA_DPLLB_SEL))
+				crtc->pch_pll = &dev_priv->pch_plls[1];
+			else if (dpll_sel & TRANSA_DPLL_ENABLE)
+				crtc->pch_pll = &dev_priv->pch_plls[0];
+			break;
+		case PIPE_B:
+			if ((dpll_sel & TRANSB_DPLL_ENABLE) &&
+			    (dpll_sel & TRANSB_DPLLB_SEL))
+				crtc->pch_pll = &dev_priv->pch_plls[1];
+			else if (dpll_sel & TRANSB_DPLL_ENABLE)
+				crtc->pch_pll = &dev_priv->pch_plls[0];
+			break;
+		case PIPE_C:
+			if ((dpll_sel & TRANSC_DPLL_ENABLE) &&
+			    (dpll_sel & TRANSC_DPLLB_SEL))
+				crtc->pch_pll = &dev_priv->pch_plls[1];
+			else if (dpll_sel & TRANSC_DPLL_ENABLE)
+				crtc->pch_pll = &dev_priv->pch_plls[0];
+			break;
+		default:
+			BUG();
+		}
+	}
+
+	crtc->pch_pll->refcount++;
+	crtc->pch_pll->active = 1;
+}
+
 static void ironlake_crtc_clock_get(struct intel_crtc *crtc,
 				    struct intel_crtc_config *pipe_config)
 {
@@ -7021,6 +7064,8 @@ static void ironlake_crtc_clock_get(struct intel_crtc *crtc,
 	do_div(clock, link_n);
 
 	pipe_config->adjusted_mode.clock = clock;
+
+	ironlake_crtc_pll_get(crtc);
 }
 
 /** Returns the currently programmed mode of the given pipe. */
@@ -9611,7 +9656,8 @@ setup_pipes:
 		if (crtc->active) {
 			intel_pipe_config_to_crtc(crtc, &crtc->config);
 
-			DRM_DEBUG_KMS("[CRTC:%d] found active mode: ");
+			DRM_DEBUG_KMS("[CRTC:%d] found active mode: ",
+				      crtc->base.base.id);
 			drm_mode_debug_printmodeline(&crtc->base.mode);
 		}
 
-- 
1.7.9.5