[Intel-gfx] [PATCH v2 1/4] drm/i915: stop using is_cpu_edp() in intel_disable/post_disable_dp

[Imre Deak]

Based on 3739850b46f - "drm/i915: disable the cpu edp port after the
cpu pipe" and the bspec disabling sequence for IVB and older it seems we
have to distinguish only the CPU vs. PCH port case, whether it's a DP or
eDP doesn't seem to matter. For IVB and older on the CPU side we can
only have eDP on port A, DP ports can only be on the PCH side. On VLV we
have only CPU side eDP/DP ports, no PCH. So the condition for the
disabling sequence we need for CPU ports is port == A || IS_VLV.

This allows us to remove is_cpu_edp() completely in a later patch.

v2:
- simplify (and fix) the condition for CPU side ports and adjust the
  commit message accordingly (Daniel)

Signed-off-by: Imre Deak <imre.deak at intel.com>
---
 drivers/gpu/drm/i915/intel_dp.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index c21fa4f..bd17887 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1372,6 +1372,8 @@ static void intel_dp_get_config(struct intel_encoder *encoder,
 static void intel_disable_dp(struct intel_encoder *encoder)
 {
 	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+	enum port port = dp_to_dig_port(intel_dp)->port;
+	struct drm_device *dev = encoder->base.dev;
 
 	/* Make sure the panel is off before trying to change the mode. But also
 	 * ensure that we have vdd while we switch off the panel. */
@@ -1381,16 +1383,17 @@ static void intel_disable_dp(struct intel_encoder *encoder)
 	ironlake_edp_panel_off(intel_dp);
 
 	/* cpu edp my only be disable _after_ the cpu pipe/plane is disabled. */
-	if (!is_cpu_edp(intel_dp))
+	if (!(port == PORT_A || IS_VALLEYVIEW(dev)))
 		intel_dp_link_down(intel_dp);
 }
 
 static void intel_post_disable_dp(struct intel_encoder *encoder)
 {
 	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+	enum port port = dp_to_dig_port(intel_dp)->port;
 	struct drm_device *dev = encoder->base.dev;
 
-	if (is_cpu_edp(intel_dp)) {
+	if (port == PORT_A || IS_VALLEYVIEW(dev)) {
 		intel_dp_link_down(intel_dp);
 		if (!IS_VALLEYVIEW(dev))
 			ironlake_edp_pll_off(intel_dp);
-- 
1.8.1.2