[Intel-gfx] [PATCH 13/18] drm/i915: consolidate interrupt naming scheme
Ben Widawsky
ben at bwidawsk.net
Tue May 28 20:50:46 CEST 2013
On Tue, May 28, 2013 at 03:01:54PM +0100, Damien Lespiau wrote:
> On Sat, Apr 27, 2013 at 05:59:24PM -0700, Ben Widawsky wrote:
> > The motivation here is we're going to add some new interrupt definitions
> > and handling outside of the GT interrupts which is all we've managed so
> > far (with some RPS exceptions). By consolidating the names in the future
> > we can make thing a bit cleaner as we don't need to define register
> > names twice, and we can leverage pretty decent overlap in HW registers
> > since ILK.
> >
> > To explain briefly what is in the comments: there are two sets of
> > interrupt masking/enabling registers. At least so far, the definitions
> > of the two sets overlap. The old code setup distinct names for
> > interrupts in each set, ie. one for global, and one for ring. This made
> > things confusing when using the wrong defines in the wrong places.
> >
> > rebase: Modified VLV bits
> >
> > Signed-off-by: Ben Widawsky <ben at bwidawsk.net>
>
>
> With or without the naming biskeshed below:
>
> Reviewed-by: Damien Lespiau <damien.lespiau at intel.com>
>
> --
> Damien
>
> > ---
> > drivers/gpu/drm/i915/i915_irq.c | 58 +++++++++---------
> > drivers/gpu/drm/i915/i915_reg.h | 101 ++++++++++++++------------------
> > drivers/gpu/drm/i915/intel_ringbuffer.c | 17 +++---
> > 3 files changed, 79 insertions(+), 97 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> > index 4a1b7f5..06e254a 100644
> > --- a/drivers/gpu/drm/i915/i915_irq.c
> > +++ b/drivers/gpu/drm/i915/i915_irq.c
> > @@ -781,7 +781,7 @@ static void ivybridge_parity_work(struct work_struct *work)
> > I915_WRITE(GEN7_MISCCPCTL, misccpctl);
> >
> > spin_lock_irqsave(&dev_priv->irq_lock, flags);
> > - dev_priv->gt_irq_mask &= ~GT_GEN7_L3_PARITY_ERROR_INTERRUPT;
> > + dev_priv->gt_irq_mask &= ~GT_RENDER_L3_PARITY_ERROR_INTERRUPT;
> > I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
> > spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
> >
> > @@ -813,7 +813,7 @@ static void ivybridge_handle_parity_error(struct drm_device *dev)
> > return;
> >
> > spin_lock_irqsave(&dev_priv->irq_lock, flags);
> > - dev_priv->gt_irq_mask |= GT_GEN7_L3_PARITY_ERROR_INTERRUPT;
> > + dev_priv->gt_irq_mask |= GT_RENDER_L3_PARITY_ERROR_INTERRUPT;
> > I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
> > spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
> >
> > @@ -825,22 +825,21 @@ static void snb_gt_irq_handler(struct drm_device *dev,
> > u32 gt_iir)
> > {
> >
> > - if (gt_iir & (GEN6_RENDER_USER_INTERRUPT |
> > - GEN6_RENDER_PIPE_CONTROL_NOTIFY_INTERRUPT))
> > + if (gt_iir & (GT_RENDER_USER_INTERRUPT | GT_RENDER_PIPECTL_NOTIFY_INTERRUPT))
> > notify_ring(dev, &dev_priv->ring[RCS]);
> > - if (gt_iir & GEN6_BSD_USER_INTERRUPT)
> > + if (gt_iir & GT_BSD_USER_INTERRUPT)
> > notify_ring(dev, &dev_priv->ring[VCS]);
> > - if (gt_iir & GEN6_BLITTER_USER_INTERRUPT)
> > + if (gt_iir & GT_BLT_USER_INTERRUPT)
> > notify_ring(dev, &dev_priv->ring[BCS]);
> >
> > - if (gt_iir & (GT_GEN6_BLT_CS_ERROR_INTERRUPT |
> > - GT_GEN6_BSD_CS_ERROR_INTERRUPT |
> > - GT_RENDER_CS_ERROR_INTERRUPT)) {
> > + if (gt_iir & (GT_BLT_CS_ERROR_INTERRUPT |
> > + GT_BSD_CS_ERROR_INTERRUPT |
> > + GT_RENDER_MASTER_ERROR_INTERRUPT)) {
>
> If we ware in the naming domain here, not sure why the CS master error
> for render would have a different name than the others,
> GT_RENDER_CS_ERROR_INTERRUPT looked good to me.
I was just copying the docs. I presume on earlier gens, maybe it meant
something else? It seems I accidently dropped the "CS" part though. I've
added that back, and left the MASTER.
"Render Command Parser Master Error"
>
> > DRM_ERROR("GT error interrupt 0x%08x\n", gt_iir);
> > i915_handle_error(dev, false);
> > }
> >
> > - if (gt_iir & GT_GEN7_L3_PARITY_ERROR_INTERRUPT)
> > + if (gt_iir & GT_RENDER_L3_PARITY_ERROR_INTERRUPT)
> > ivybridge_handle_parity_error(dev);
> > }
> >
> > @@ -1284,9 +1283,9 @@ static void ilk_gt_irq_handler(struct drm_device *dev,
> > struct drm_i915_private *dev_priv,
> > u32 gt_iir)
> > {
> > - if (gt_iir & (GT_USER_INTERRUPT | GT_PIPE_NOTIFY))
> > + if (gt_iir & (GT_RENDER_USER_INTERRUPT | GT_RENDER_PIPECTL_NOTIFY_INTERRUPT))
> > notify_ring(dev, &dev_priv->ring[RCS]);
> > - if (gt_iir & GT_BSD_USER_INTERRUPT)
> > + if (gt_iir & ILK_BSD_USER_INTERRUPT)
> > notify_ring(dev, &dev_priv->ring[VCS]);
> > }
> >
> > @@ -2629,7 +2628,7 @@ static int ironlake_irq_postinstall(struct drm_device *dev)
> > DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE |
> > DE_AUX_CHANNEL_A | DE_PIPEB_FIFO_UNDERRUN |
> > DE_PIPEA_FIFO_UNDERRUN | DE_POISON;
> > - u32 render_irqs;
> > + u32 gt_irqs;
> >
> > dev_priv->irq_mask = ~display_mask;
> >
> > @@ -2644,17 +2643,14 @@ static int ironlake_irq_postinstall(struct drm_device *dev)
> > I915_WRITE(GTIIR, I915_READ(GTIIR));
> > I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
> >
> > + gt_irqs = GT_RENDER_USER_INTERRUPT;
> > +
> > if (IS_GEN6(dev))
> > - render_irqs =
> > - GT_USER_INTERRUPT |
> > - GEN6_BSD_USER_INTERRUPT |
> > - GEN6_BLITTER_USER_INTERRUPT;
> > + gt_irqs |= GT_BLT_USER_INTERRUPT | GT_BSD_USER_INTERRUPT;
> > else
> > - render_irqs =
> > - GT_USER_INTERRUPT |
> > - GT_PIPE_NOTIFY |
> > - GT_BSD_USER_INTERRUPT;
> > - I915_WRITE(GTIER, render_irqs);
> > + gt_irqs |= GT_RENDER_PIPECTL_NOTIFY_INTERRUPT | ILK_BSD_USER_INTERRUPT;
> > +
> > + I915_WRITE(GTIER, gt_irqs);
> > POSTING_READ(GTIER);
> >
> > ibx_irq_postinstall(dev);
> > @@ -2680,7 +2676,7 @@ static int ivybridge_irq_postinstall(struct drm_device *dev)
> > DE_PLANEA_FLIP_DONE_IVB |
> > DE_AUX_CHANNEL_A_IVB |
> > DE_ERR_INT_IVB;
> > - u32 render_irqs;
> > + u32 gt_irqs;
> >
> > dev_priv->irq_mask = ~display_mask;
> >
> > @@ -2695,14 +2691,14 @@ static int ivybridge_irq_postinstall(struct drm_device *dev)
> > DE_PIPEA_VBLANK_IVB);
> > POSTING_READ(DEIER);
> >
> > - dev_priv->gt_irq_mask = ~GT_GEN7_L3_PARITY_ERROR_INTERRUPT;
> > + dev_priv->gt_irq_mask = ~GT_RENDER_L3_PARITY_ERROR_INTERRUPT;
> >
> > I915_WRITE(GTIIR, I915_READ(GTIIR));
> > I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
> >
> > - render_irqs = GT_USER_INTERRUPT | GEN6_BSD_USER_INTERRUPT |
> > - GEN6_BLITTER_USER_INTERRUPT | GT_GEN7_L3_PARITY_ERROR_INTERRUPT;
> > - I915_WRITE(GTIER, render_irqs);
> > + gt_irqs = GT_RENDER_USER_INTERRUPT | GT_BSD_USER_INTERRUPT |
> > + GT_BLT_USER_INTERRUPT | GT_RENDER_L3_PARITY_ERROR_INTERRUPT;
> > + I915_WRITE(GTIER, gt_irqs);
> > POSTING_READ(GTIER);
> >
> > ibx_irq_postinstall(dev);
> > @@ -2713,9 +2709,9 @@ static int ivybridge_irq_postinstall(struct drm_device *dev)
> > static int valleyview_irq_postinstall(struct drm_device *dev)
> > {
> > drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
> > + u32 gt_irqs;
> > u32 enable_mask;
> > u32 pipestat_enable = PLANE_FLIP_DONE_INT_EN_VLV;
> > - u32 render_irqs;
> > u16 msid;
> >
> > enable_mask = I915_DISPLAY_PORT_INTERRUPT;
> > @@ -2759,9 +2755,9 @@ static int valleyview_irq_postinstall(struct drm_device *dev)
> > I915_WRITE(GTIIR, I915_READ(GTIIR));
> > I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
> >
> > - render_irqs = GT_USER_INTERRUPT | GEN6_BSD_USER_INTERRUPT |
> > - GEN6_BLITTER_USER_INTERRUPT;
> > - I915_WRITE(GTIER, render_irqs);
> > + gt_irqs = GT_RENDER_USER_INTERRUPT | GT_BSD_USER_INTERRUPT |
> > + GT_BLT_USER_INTERRUPT;
> > + I915_WRITE(GTIER, gt_irqs);
> > POSTING_READ(GTIER);
> >
> > /* ack & enable invalid PTE error interrupts */
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> > index 4485dfa..399d041 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -716,24 +716,6 @@
> > #define VLV_IIR (VLV_DISPLAY_BASE + 0x20a4)
> > #define VLV_IMR (VLV_DISPLAY_BASE + 0x20a8)
> > #define VLV_ISR (VLV_DISPLAY_BASE + 0x20ac)
> > -#define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18)
> > -#define I915_DISPLAY_PORT_INTERRUPT (1<<17)
> > -#define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15)
> > -#define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT (1<<14) /* p-state */
> > -#define I915_HWB_OOM_INTERRUPT (1<<13)
> > -#define I915_SYNC_STATUS_INTERRUPT (1<<12)
> > -#define I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT (1<<11)
> > -#define I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT (1<<10)
> > -#define I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT (1<<9)
> > -#define I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT (1<<8)
> > -#define I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT (1<<7)
> > -#define I915_DISPLAY_PIPE_A_EVENT_INTERRUPT (1<<6)
> > -#define I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT (1<<5)
> > -#define I915_DISPLAY_PIPE_B_EVENT_INTERRUPT (1<<4)
> > -#define I915_DEBUG_INTERRUPT (1<<2)
> > -#define I915_USER_INTERRUPT (1<<1)
> > -#define I915_ASLE_INTERRUPT (1<<0)
> > -#define I915_BSD_USER_INTERRUPT (1<<25)
> > #define DISPLAY_PLANE_FLIP_PENDING(plane) (1<<(11-(plane))) /* A and B only */
> > #define EIR 0x020b0
> > #define EMR 0x020b4
> > @@ -845,28 +827,6 @@
> > #define CACHE_MODE_1 0x7004 /* IVB+ */
> > #define PIXEL_SUBSPAN_COLLECT_OPT_DISABLE (1<<6)
> >
> > -/* GEN6 interrupt control
> > - * Note that the per-ring interrupt bits do alias with the global interrupt bits
> > - * in GTIMR. */
> > -#define GEN6_RENDER_HWSTAM 0x2098
> > -#define GEN6_RENDER_IMR 0x20a8
> > -#define GEN6_RENDER_CONTEXT_SWITCH_INTERRUPT (1 << 8)
> > -#define GEN6_RENDER_PPGTT_PAGE_FAULT (1 << 7)
> > -#define GEN6_RENDER_TIMEOUT_COUNTER_EXPIRED (1 << 6)
> > -#define GEN6_RENDER_L3_PARITY_ERROR (1 << 5)
> > -#define GEN6_RENDER_PIPE_CONTROL_NOTIFY_INTERRUPT (1 << 4)
> > -#define GEN6_RENDER_COMMAND_PARSER_MASTER_ERROR (1 << 3)
> > -#define GEN6_RENDER_SYNC_STATUS (1 << 2)
> > -#define GEN6_RENDER_DEBUG_INTERRUPT (1 << 1)
> > -#define GEN6_RENDER_USER_INTERRUPT (1 << 0)
> > -
> > -#define GEN6_BLITTER_HWSTAM 0x22098
> > -#define GEN6_BLITTER_IMR 0x220a8
> > -#define GEN6_BLITTER_MI_FLUSH_DW_NOTIFY_INTERRUPT (1 << 26)
> > -#define GEN6_BLITTER_COMMAND_PARSER_MASTER_ERROR (1 << 25)
> > -#define GEN6_BLITTER_SYNC_STATUS (1 << 24)
> > -#define GEN6_BLITTER_USER_INTERRUPT (1 << 22)
> > -
> > #define GEN6_BLITTER_ECOSKPD 0x221d0
> > #define GEN6_BLITTER_LOCK_SHIFT 16
> > #define GEN6_BLITTER_FBC_NOTIFY (1<<3)
> > @@ -877,9 +837,49 @@
> > #define GEN6_BSD_SLEEP_INDICATOR (1 << 3)
> > #define GEN6_BSD_GO_INDICATOR (1 << 4)
> >
> > -#define GEN6_BSD_HWSTAM 0x12098
> > -#define GEN6_BSD_IMR 0x120a8
> > -#define GEN6_BSD_USER_INTERRUPT (1 << 12)
> > +/* On modern GEN architectures interrupt control consists of two sets
> > + * of registers. The first set pertains to the ring generating the
> > + * interrupt. The second control is for the functional block generating the
> > + * interrupt. These are PM, GT, DE, etc.
> > + *
> > + * Luckily *knocks on wood* all the ring interrupt bits match up with the
> > + * GT interrupt bits, so we don't need to duplicate the defines.
> > + *
> > + * These defines should cover us well from SNB->HSW with minor exceptions
> > + * it can also work on ILK.
> > + */
> > +#define GT_BLT_FLUSHDW_NOTIFY_INTERRUPT (1 << 26)
> > +#define GT_BLT_CS_ERROR_INTERRUPT (1 << 25)
> > +#define GT_BLT_USER_INTERRUPT (1 << 22)
> > +#define GT_BSD_CS_ERROR_INTERRUPT (1 << 15)
> > +#define GT_BSD_USER_INTERRUPT (1 << 12)
> > +#define GT_RENDER_L3_PARITY_ERROR_INTERRUPT (1 << 5) /* !snb */
> > +#define GT_RENDER_PIPECTL_NOTIFY_INTERRUPT (1 << 4)
> > +#define GT_RENDER_MASTER_ERROR_INTERRUPT (1 << 3)
> > +#define GT_RENDER_SYNC_STATUS_INTERRUPT (1 << 2)
> > +#define GT_RENDER_DEBUG_INTERRUPT (1 << 1)
> > +#define GT_RENDER_USER_INTERRUPT (1 << 0)
> > +
> > +/* These are all the "old" interrupts */
> > +#define ILK_BSD_USER_INTERRUPT (1<<5)
> > +#define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18)
> > +#define I915_DISPLAY_PORT_INTERRUPT (1<<17)
> > +#define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15)
> > +#define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT (1<<14) /* p-state */
> > +#define I915_HWB_OOM_INTERRUPT (1<<13)
> > +#define I915_SYNC_STATUS_INTERRUPT (1<<12)
> > +#define I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT (1<<11)
> > +#define I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT (1<<10)
> > +#define I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT (1<<9)
> > +#define I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT (1<<8)
> > +#define I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT (1<<7)
> > +#define I915_DISPLAY_PIPE_A_EVENT_INTERRUPT (1<<6)
> > +#define I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT (1<<5)
> > +#define I915_DISPLAY_PIPE_B_EVENT_INTERRUPT (1<<4)
> > +#define I915_DEBUG_INTERRUPT (1<<2)
> > +#define I915_USER_INTERRUPT (1<<1)
> > +#define I915_ASLE_INTERRUPT (1<<0)
> > +#define I915_BSD_USER_INTERRUPT (1 << 25)
> >
> > #define GEN6_BSD_RNCID 0x12198
> >
> > @@ -3665,21 +3665,6 @@
> > #define DEIIR 0x44008
> > #define DEIER 0x4400c
> >
> > -/* GT interrupt.
> > - * Note that for gen6+ the ring-specific interrupt bits do alias with the
> > - * corresponding bits in the per-ring interrupt control registers. */
> > -#define GT_GEN6_BLT_FLUSHDW_NOTIFY_INTERRUPT (1 << 26)
> > -#define GT_GEN6_BLT_CS_ERROR_INTERRUPT (1 << 25)
> > -#define GT_GEN6_BLT_USER_INTERRUPT (1 << 22)
> > -#define GT_GEN6_BSD_CS_ERROR_INTERRUPT (1 << 15)
> > -#define GT_GEN6_BSD_USER_INTERRUPT (1 << 12)
> > -#define GT_BSD_USER_INTERRUPT (1 << 5) /* ilk only */
> > -#define GT_GEN7_L3_PARITY_ERROR_INTERRUPT (1 << 5)
> > -#define GT_PIPE_NOTIFY (1 << 4)
> > -#define GT_RENDER_CS_ERROR_INTERRUPT (1 << 3)
> > -#define GT_SYNC_STATUS (1 << 2)
> > -#define GT_USER_INTERRUPT (1 << 0)
> > -
> > #define GTISR 0x44010
> > #define GTIMR 0x44014
> > #define GTIIR 0x44018
> > diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
> > index a737c66..ccfa1f9 100644
> > --- a/drivers/gpu/drm/i915/intel_ringbuffer.c
> > +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
> > @@ -556,7 +556,7 @@ static int init_render_ring(struct intel_ring_buffer *ring)
> > I915_WRITE(INSTPM, _MASKED_BIT_ENABLE(INSTPM_FORCE_ORDERING));
> >
> > if (HAS_L3_GPU_CACHE(dev))
> > - I915_WRITE_IMR(ring, ~GEN6_RENDER_L3_PARITY_ERROR);
> > + I915_WRITE_IMR(ring, ~GT_RENDER_L3_PARITY_ERROR_INTERRUPT);
> >
> > return ret;
> > }
> > @@ -971,7 +971,7 @@ gen6_ring_get_irq(struct intel_ring_buffer *ring)
> > if (ring->irq_refcount.gt++ == 0) {
> > if (HAS_L3_GPU_CACHE(dev) && ring->id == RCS)
> > I915_WRITE_IMR(ring, ~(ring->irq_enable_mask |
> > - GEN6_RENDER_L3_PARITY_ERROR));
> > + GT_RENDER_L3_PARITY_ERROR_INTERRUPT));
> > else
> > I915_WRITE_IMR(ring, ~ring->irq_enable_mask);
> > dev_priv->gt_irq_mask &= ~ring->irq_enable_mask;
> > @@ -993,7 +993,7 @@ gen6_ring_put_irq(struct intel_ring_buffer *ring)
> > spin_lock_irqsave(&dev_priv->irq_lock, flags);
> > if (--ring->irq_refcount.gt == 0) {
> > if (HAS_L3_GPU_CACHE(dev) && ring->id == RCS)
> > - I915_WRITE_IMR(ring, ~GEN6_RENDER_L3_PARITY_ERROR);
> > + I915_WRITE_IMR(ring, ~GT_RENDER_L3_PARITY_ERROR_INTERRUPT);
> > else
> > I915_WRITE_IMR(ring, ~0);
> > dev_priv->gt_irq_mask |= ring->irq_enable_mask;
> > @@ -1669,7 +1669,7 @@ int intel_init_render_ring_buffer(struct drm_device *dev)
> > ring->flush = gen6_render_ring_flush;
> > ring->irq_get = gen6_ring_get_irq;
> > ring->irq_put = gen6_ring_put_irq;
> > - ring->irq_enable_mask = GT_USER_INTERRUPT;
> > + ring->irq_enable_mask = GT_RENDER_USER_INTERRUPT;
> > ring->get_seqno = gen6_ring_get_seqno;
> > ring->set_seqno = ring_set_seqno;
> > ring->sync_to = gen6_ring_sync;
> > @@ -1688,7 +1688,8 @@ int intel_init_render_ring_buffer(struct drm_device *dev)
> > ring->set_seqno = pc_render_set_seqno;
> > ring->irq_get = gen5_ring_get_irq;
> > ring->irq_put = gen5_ring_put_irq;
> > - ring->irq_enable_mask = GT_USER_INTERRUPT | GT_PIPE_NOTIFY;
> > + ring->irq_enable_mask = GT_RENDER_USER_INTERRUPT |
> > + GT_RENDER_PIPECTL_NOTIFY_INTERRUPT;
> > } else {
> > ring->add_request = i9xx_add_request;
> > if (INTEL_INFO(dev)->gen < 4)
> > @@ -1830,7 +1831,7 @@ int intel_init_bsd_ring_buffer(struct drm_device *dev)
> > ring->add_request = gen6_add_request;
> > ring->get_seqno = gen6_ring_get_seqno;
> > ring->set_seqno = ring_set_seqno;
> > - ring->irq_enable_mask = GEN6_BSD_USER_INTERRUPT;
> > + ring->irq_enable_mask = GT_BSD_USER_INTERRUPT;
> > ring->irq_get = gen6_ring_get_irq;
> > ring->irq_put = gen6_ring_put_irq;
> > ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer;
> > @@ -1850,7 +1851,7 @@ int intel_init_bsd_ring_buffer(struct drm_device *dev)
> > ring->get_seqno = ring_get_seqno;
> > ring->set_seqno = ring_set_seqno;
> > if (IS_GEN5(dev)) {
> > - ring->irq_enable_mask = GT_BSD_USER_INTERRUPT;
> > + ring->irq_enable_mask = ILK_BSD_USER_INTERRUPT;
> > ring->irq_get = gen5_ring_get_irq;
> > ring->irq_put = gen5_ring_put_irq;
> > } else {
> > @@ -1879,7 +1880,7 @@ int intel_init_blt_ring_buffer(struct drm_device *dev)
> > ring->add_request = gen6_add_request;
> > ring->get_seqno = gen6_ring_get_seqno;
> > ring->set_seqno = ring_set_seqno;
> > - ring->irq_enable_mask = GEN6_BLITTER_USER_INTERRUPT;
> > + ring->irq_enable_mask = GT_BLT_USER_INTERRUPT;
> > ring->irq_get = gen6_ring_get_irq;
> > ring->irq_put = gen6_ring_put_irq;
> > ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer;
> > --
> > 1.8.2.1
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx at lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ben Widawsky, Intel Open Source Technology Center
More information about the Intel-gfx
mailing list