[Intel-gfx] [PATCH 3/5] drm/i915: properly set HSW WM_PIPE registers
Ville Syrjälä
ville.syrjala at linux.intel.com
Wed May 29 17:39:54 CEST 2013
On Mon, May 27, 2013 at 04:21:19PM -0300, Paulo Zanoni wrote:
> From: Paulo Zanoni <paulo.r.zanoni at intel.com>
>
> We were previously calling sandybridge_update_wm on HSW, but the SNB
> function didn't really match the HSW specification, so we were just
> writing the wrong values.
>
> With this patch, the haswell_update_wm function will set the correct
> values for the WM_PIPE registers, but it will still keep all the LP
> watermarks disabled.
>
> The patch may look a little bit over-complicated for now, but it's
> because much of the infrastructure for setting the LP watermarks is
> already in place, so we won't have too much code churn on the patch
> that sets the LP watermarks.
>
> v2: - Fix pixel_rate on panel fitter case (Ville)
> - Try to not overflow (Ville)
> - Remove useless variable (Ville)
> - Fix p->pri_horiz_pixels (Paulo)
> v3: - Fix rounding errors on hsw_wm_method2 (Ville)
>
> Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 3 +
> drivers/gpu/drm/i915/intel_pm.c | 338 +++++++++++++++++++++++++++++++++++++---
> 2 files changed, 323 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index dbd9de5..5a49f8a 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -4931,6 +4931,9 @@
> #define SFUSE_STRAP_DDIC_DETECTED (1<<1)
> #define SFUSE_STRAP_DDID_DETECTED (1<<0)
>
> +#define WM_MISC 0x45260
> +#define WM_MISC_DATA_PARTITION_5_6 (1 << 0)
> +
> #define WM_DBG 0x45280
> #define WM_DBG_DISALLOW_MULTIPLE_LP (1<<0)
> #define WM_DBG_DISALLOW_MAXFIFO (1<<1)
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 9328ed9..5460409 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -2072,19 +2072,170 @@ static void ivybridge_update_wm(struct drm_device *dev)
> cursor_wm);
> }
>
> -static void
> -haswell_update_linetime_wm(struct drm_device *dev, struct drm_crtc *crtc)
> +static uint32_t hsw_wm_get_pixel_rate(struct drm_device *dev,
> + struct drm_crtc *crtc)
> +{
> + struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> + uint32_t pixel_rate, pfit_size;
> +
> + if (intel_crtc->config.pixel_target_clock)
> + pixel_rate = intel_crtc->config.pixel_target_clock;
> + else
> + pixel_rate = intel_crtc->config.adjusted_mode.clock;
> +
> + /* We only use IF-ID interlacing. If we ever use PF-ID we'll need to
> + * adjust the pixel_rate here. */
> +
> + pfit_size = intel_crtc->config.pch_pfit.size;
> + if (pfit_size) {
> + uint64_t pipe_w, pipe_h, pfit_w, pfit_h;
> +
> + pipe_w = intel_crtc->config.requested_mode.hdisplay;
> + pipe_h = intel_crtc->config.requested_mode.vdisplay;
> + pfit_w = (pfit_size >> 16) & 0xFFFF;
> + pfit_h = pfit_size & 0xFFFF;
> + if (pipe_w < pfit_w)
> + pipe_w = pfit_w;
> + if (pipe_h < pfit_h)
> + pipe_h = pfit_h;
> +
> + pixel_rate = div_u64((uint64_t) pixel_rate * pipe_w * pipe_h,
> + pfit_w * pfit_h);
> + }
> +
> + return pixel_rate;
> +}
> +
> +static uint32_t hsw_wm_method1(uint32_t pixel_rate, uint8_t bytes_per_pixel,
> + uint32_t latency)
> +{
> + uint64_t ret;
> +
> + ret = (uint64_t) pixel_rate * bytes_per_pixel * latency;
> + ret = DIV_ROUND_UP_ULL(ret, 64 * 10000) + 2;
> +
> + return ret;
> +}
> +
> +static uint32_t hsw_wm_method2(uint32_t pixel_rate, uint32_t pipe_htotal,
> + uint32_t horiz_pixels, uint8_t bytes_per_pixel,
> + uint32_t latency)
> +{
> + uint32_t ret;
> +
> + ret = (latency * pixel_rate) / (pipe_htotal * 10000);
> + ret = (ret + 1) * horiz_pixels * bytes_per_pixel;
> + ret = DIV_ROUND_UP(ret, 64) + 2;
> + return ret;
That leaves us w/ 20 bits for pixel_rate, which I guess should be enough
for the forseeable future.
> +}
> +
> +struct hsw_pipe_wm_parameters {
> + bool active;
> + bool sprite_enabled;
> + uint8_t pri_bytes_per_pixel;
> + uint8_t spr_bytes_per_pixel;
> + uint8_t cur_bytes_per_pixel;
> + uint32_t pri_horiz_pixels;
> + uint32_t spr_horiz_pixels;
> + uint32_t cur_horiz_pixels;
> + uint32_t pipe_htotal;
> + uint32_t pixel_rate;
> +};
> +
> +struct hsw_wm_values {
> + uint32_t wm_pipe[3];
> + uint32_t wm_lp[3];
> + uint32_t wm_lp_spr[3];
> + uint32_t wm_linetime[3];
> +};
> +
> +enum hsw_data_buf_partitioning {
> + HSW_DATA_BUF_PART_1_2,
> + HSW_DATA_BUF_PART_5_6,
> +};
> +
> +/* Only for WM_PIPE. */
> +static uint32_t hsw_compute_pri_wm_pipe(struct hsw_pipe_wm_parameters *params,
> + uint32_t mem_value)
> +{
> + /* TODO: for now, assume the primary plane is always enabled. */
> + if (!params->active)
> + return 0;
> +
> + return hsw_wm_method1(params->pixel_rate,
> + params->pri_bytes_per_pixel,
> + mem_value);
> +}
> +
> +/* For both WM_PIPE and WM_LP. */
> +static uint32_t hsw_compute_spr_wm(struct hsw_pipe_wm_parameters *params,
> + uint32_t mem_value)
> +{
> + uint32_t method1, method2;
> +
> + if (!params->active || !params->sprite_enabled)
> + return 0;
> +
> + method1 = hsw_wm_method1(params->pixel_rate,
> + params->spr_bytes_per_pixel,
> + mem_value);
> + method2 = hsw_wm_method2(params->pixel_rate,
> + params->pipe_htotal,
> + params->spr_horiz_pixels,
> + params->spr_bytes_per_pixel,
> + mem_value);
> + return min(method1, method2);
> +}
> +
> +/* For both WM_PIPE and WM_LP. */
> +static uint32_t hsw_compute_cur_wm(struct hsw_pipe_wm_parameters *params,
> + uint32_t mem_value)
> +{
> + if (!params->active)
> + return 0;
> +
> + return hsw_wm_method2(params->pixel_rate,
> + params->pipe_htotal,
> + params->cur_horiz_pixels,
> + params->cur_bytes_per_pixel,
> + mem_value);
> +}
> +
> +static uint32_t hsw_compute_wm_pipe(struct drm_i915_private *dev_priv,
> + uint32_t mem_value, enum pipe pipe,
> + struct hsw_pipe_wm_parameters *params)
> +{
> + uint32_t pri_val, cur_val, spr_val;
> +
> + pri_val = hsw_compute_pri_wm_pipe(params, mem_value);
> + spr_val = hsw_compute_spr_wm(params, mem_value);
> + cur_val = hsw_compute_cur_wm(params, mem_value);
> +
> + WARN(pri_val > 127,
> + "Primary WM error, mode not supported for pipe %c\n",
> + pipe_name(pipe));
> + WARN(spr_val > 127,
> + "Sprite WM error, mode not supported for pipe %c\n",
> + pipe_name(pipe));
> + WARN(cur_val > 63,
> + "Cursor WM error, mode not supported for pipe %c\n",
> + pipe_name(pipe));
> +
> + return (pri_val << WM0_PIPE_PLANE_SHIFT) |
> + (spr_val << WM0_PIPE_SPRITE_SHIFT) |
> + cur_val;
> +}
Up to this point most of the functions/structs could use ilk_ prefix
instead of hsw_, but I suppose we can rename it all later...
The rest look OK to me.
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> +
> +static uint32_t
> +hsw_compute_linetime_wm(struct drm_device *dev, struct drm_crtc *crtc)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> - enum pipe pipe = intel_crtc->pipe;
> struct drm_display_mode *mode = &intel_crtc->config.adjusted_mode;
> u32 linetime, ips_linetime;
>
> - if (!intel_crtc_active(crtc)) {
> - I915_WRITE(PIPE_WM_LINETIME(pipe), 0);
> - return;
> - }
> + if (!intel_crtc_active(crtc))
> + return 0;
>
> /* The WM are computed with base on how long it takes to fill a single
> * row at the given clock rate, multiplied by 8.
> @@ -2093,29 +2244,180 @@ haswell_update_linetime_wm(struct drm_device *dev, struct drm_crtc *crtc)
> ips_linetime = DIV_ROUND_CLOSEST(mode->htotal * 1000 * 8,
> intel_ddi_get_cdclk_freq(dev_priv));
>
> - I915_WRITE(PIPE_WM_LINETIME(pipe),
> - PIPE_WM_LINETIME_IPS_LINETIME(ips_linetime) |
> - PIPE_WM_LINETIME_TIME(linetime));
> + return PIPE_WM_LINETIME_IPS_LINETIME(ips_linetime) |
> + PIPE_WM_LINETIME_TIME(linetime);
> }
>
> -static void haswell_update_wm(struct drm_device *dev)
> +static void hsw_compute_wm_parameters(struct drm_device *dev,
> + struct hsw_pipe_wm_parameters *params,
> + uint32_t *wm)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> struct drm_crtc *crtc;
> + struct drm_plane *plane;
> + uint64_t sskpd = I915_READ64(MCH_SSKPD);
> enum pipe pipe;
>
> - /* Disable the LP WMs before changine the linetime registers. This is
> - * just a temporary code that will be replaced soon. */
> - I915_WRITE(WM3_LP_ILK, 0);
> - I915_WRITE(WM2_LP_ILK, 0);
> - I915_WRITE(WM1_LP_ILK, 0);
> + if ((sskpd >> 56) & 0xFF)
> + wm[0] = (sskpd >> 56) & 0xFF;
> + else
> + wm[0] = sskpd & 0xF;
> + wm[1] = ((sskpd >> 4) & 0xFF) * 5;
> + wm[2] = ((sskpd >> 12) & 0xFF) * 5;
> + wm[3] = ((sskpd >> 20) & 0x1FF) * 5;
> + wm[4] = ((sskpd >> 32) & 0x1FF) * 5;
> +
> + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
> + struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> + struct hsw_pipe_wm_parameters *p;
> +
> + pipe = intel_crtc->pipe;
> + p = ¶ms[pipe];
> +
> + p->active = intel_crtc_active(crtc);
> + if (!p->active)
> + continue;
> +
> + p->pipe_htotal = intel_crtc->config.adjusted_mode.htotal;
> + p->pixel_rate = hsw_wm_get_pixel_rate(dev, crtc);
> + p->pri_bytes_per_pixel = crtc->fb->bits_per_pixel / 8;
> + p->cur_bytes_per_pixel = 4;
> + p->pri_horiz_pixels =
> + intel_crtc->config.requested_mode.hdisplay;
> + p->cur_horiz_pixels = 64;
> + }
> +
> + list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
> + struct intel_plane *intel_plane = to_intel_plane(plane);
> + struct hsw_pipe_wm_parameters *p;
> +
> + pipe = intel_plane->pipe;
> + p = ¶ms[pipe];
> +
> + p->sprite_enabled = intel_plane->wm.enable;
> + p->spr_bytes_per_pixel = intel_plane->wm.bytes_per_pixel;
> + p->spr_horiz_pixels = intel_plane->wm.horiz_pixels;
> + }
> +}
> +
> +static void hsw_compute_wm_results(struct drm_device *dev,
> + struct hsw_pipe_wm_parameters *params,
> + uint32_t *wm,
> + struct hsw_wm_values *results)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct drm_crtc *crtc;
> + enum pipe pipe;
> +
> + /* No support for LP WMs yet. */
> + results->wm_lp[2] = 0;
> + results->wm_lp[1] = 0;
> + results->wm_lp[0] = 0;
> + results->wm_lp_spr[2] = 0;
> + results->wm_lp_spr[1] = 0;
> + results->wm_lp_spr[0] = 0;
> +
> + for_each_pipe(pipe)
> + results->wm_pipe[pipe] = hsw_compute_wm_pipe(dev_priv, wm[0],
> + pipe,
> + ¶ms[pipe]);
>
> for_each_pipe(pipe) {
> crtc = dev_priv->pipe_to_crtc_mapping[pipe];
> - haswell_update_linetime_wm(dev, crtc);
> + results->wm_linetime[pipe] = hsw_compute_linetime_wm(dev, crtc);
> }
> +}
> +
> +/*
> + * The spec says we shouldn't write when we don't need, because every write
> + * causes WMs to be re-evaluated, expending some power.
> + */
> +static void hsw_write_wm_values(struct drm_i915_private *dev_priv,
> + struct hsw_wm_values *results,
> + enum hsw_data_buf_partitioning partitioning)
> +{
> + struct hsw_wm_values previous;
> + uint32_t val;
> + enum hsw_data_buf_partitioning prev_partitioning;
> +
> + previous.wm_pipe[0] = I915_READ(WM0_PIPEA_ILK);
> + previous.wm_pipe[1] = I915_READ(WM0_PIPEB_ILK);
> + previous.wm_pipe[2] = I915_READ(WM0_PIPEC_IVB);
> + previous.wm_lp[0] = I915_READ(WM1_LP_ILK);
> + previous.wm_lp[1] = I915_READ(WM2_LP_ILK);
> + previous.wm_lp[2] = I915_READ(WM3_LP_ILK);
> + previous.wm_lp_spr[0] = I915_READ(WM1S_LP_ILK);
> + previous.wm_lp_spr[1] = I915_READ(WM2S_LP_IVB);
> + previous.wm_lp_spr[2] = I915_READ(WM3S_LP_IVB);
> + previous.wm_linetime[0] = I915_READ(PIPE_WM_LINETIME(PIPE_A));
> + previous.wm_linetime[1] = I915_READ(PIPE_WM_LINETIME(PIPE_B));
> + previous.wm_linetime[2] = I915_READ(PIPE_WM_LINETIME(PIPE_C));
> +
> + prev_partitioning = (I915_READ(WM_MISC) & WM_MISC_DATA_PARTITION_5_6) ?
> + HSW_DATA_BUF_PART_5_6 : HSW_DATA_BUF_PART_1_2;
> +
> + if (memcmp(results->wm_pipe, previous.wm_pipe, 3) == 0 &&
> + memcmp(results->wm_lp, previous.wm_lp, 3) == 0 &&
> + memcmp(results->wm_lp_spr, previous.wm_lp_spr, 3) == 0 &&
> + memcmp(results->wm_linetime, previous.wm_linetime, 3) == 0 &&
> + partitioning == prev_partitioning)
> + return;
> +
> + if (previous.wm_lp[2] != 0)
> + I915_WRITE(WM3_LP_ILK, 0);
> + if (previous.wm_lp[1] != 0)
> + I915_WRITE(WM2_LP_ILK, 0);
> + if (previous.wm_lp[0] != 0)
> + I915_WRITE(WM1_LP_ILK, 0);
> +
> + if (previous.wm_pipe[0] != results->wm_pipe[0])
> + I915_WRITE(WM0_PIPEA_ILK, results->wm_pipe[0]);
> + if (previous.wm_pipe[1] != results->wm_pipe[1])
> + I915_WRITE(WM0_PIPEB_ILK, results->wm_pipe[1]);
> + if (previous.wm_pipe[2] != results->wm_pipe[2])
> + I915_WRITE(WM0_PIPEC_IVB, results->wm_pipe[2]);
> +
> + if (previous.wm_linetime[0] != results->wm_linetime[0])
> + I915_WRITE(PIPE_WM_LINETIME(PIPE_A), results->wm_linetime[0]);
> + if (previous.wm_linetime[1] != results->wm_linetime[1])
> + I915_WRITE(PIPE_WM_LINETIME(PIPE_B), results->wm_linetime[1]);
> + if (previous.wm_linetime[2] != results->wm_linetime[2])
> + I915_WRITE(PIPE_WM_LINETIME(PIPE_C), results->wm_linetime[2]);
> +
> + if (prev_partitioning != partitioning) {
> + val = I915_READ(WM_MISC);
> + if (partitioning == HSW_DATA_BUF_PART_1_2)
> + val &= ~WM_MISC_DATA_PARTITION_5_6;
> + else
> + val |= WM_MISC_DATA_PARTITION_5_6;
> + I915_WRITE(WM_MISC, val);
> + }
> +
> + if (previous.wm_lp_spr[0] != results->wm_lp_spr[0])
> + I915_WRITE(WM1S_LP_ILK, results->wm_lp_spr[0]);
> + if (previous.wm_lp_spr[1] != results->wm_lp_spr[1])
> + I915_WRITE(WM2S_LP_IVB, results->wm_lp_spr[1]);
> + if (previous.wm_lp_spr[2] != results->wm_lp_spr[2])
> + I915_WRITE(WM3S_LP_IVB, results->wm_lp_spr[2]);
> +
> + if (results->wm_lp[0] != 0)
> + I915_WRITE(WM1_LP_ILK, results->wm_lp[0]);
> + if (results->wm_lp[1] != 0)
> + I915_WRITE(WM2_LP_ILK, results->wm_lp[1]);
> + if (results->wm_lp[2] != 0)
> + I915_WRITE(WM3_LP_ILK, results->wm_lp[2]);
> +}
> +
> +static void haswell_update_wm(struct drm_device *dev)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct hsw_pipe_wm_parameters params[3];
> + struct hsw_wm_values results;
> + uint32_t wm[5];
>
> - sandybridge_update_wm(dev);
> + hsw_compute_wm_parameters(dev, params, wm);
> + hsw_compute_wm_results(dev, params, wm, &results);
> + hsw_write_wm_values(dev_priv, &results, HSW_DATA_BUF_PART_1_2);
> }
>
> static void haswell_update_sprite_wm(struct drm_device *dev, int pipe,
> --
> 1.8.1.2
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
More information about the Intel-gfx
mailing list