[Intel-gfx] [PATCH 3/4] drm/i915: scramble reset support for DP port CRC on vlv
Daniel Vetter
daniel.vetter at ffwll.ch
Fri Nov 1 10:50:22 CET 2013
They've moved the DC balance reset bit around. Again I don't think we
need it, but better safe than sorry and maybe HDMI port CRC will prove
useful for checking infoframes or hdmi audio.
Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
drivers/gpu/drm/i915/i915_debugfs.c | 38 +++++++++++++++++++++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 194ca5f..5942362 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -2026,6 +2026,9 @@ static int vlv_pipe_crc_ctl_reg(struct drm_device *dev,
enum intel_pipe_crc_source *source,
uint32_t *val)
{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ bool need_scramble_reset = false;
+
if (*source == INTEL_PIPE_CRC_SOURCE_AUTO) {
int ret = i9xx_pipe_crc_auto_source(dev, pipe, source);
if (ret)
@@ -2038,9 +2041,11 @@ static int vlv_pipe_crc_ctl_reg(struct drm_device *dev,
break;
case INTEL_PIPE_CRC_SOURCE_DP_B:
*val = PIPE_CRC_ENABLE | PIPE_CRC_SOURCE_DP_B_VLV;
+ need_scramble_reset = true;
break;
case INTEL_PIPE_CRC_SOURCE_DP_C:
*val = PIPE_CRC_ENABLE | PIPE_CRC_SOURCE_DP_C_VLV;
+ need_scramble_reset = true;
break;
case INTEL_PIPE_CRC_SOURCE_NONE:
*val = 0;
@@ -2049,6 +2054,21 @@ static int vlv_pipe_crc_ctl_reg(struct drm_device *dev,
return -EINVAL;
}
+ /* DP port CRC needs slight spec mis-compliance to get stable CRCs. */
+ if (need_scramble_reset) {
+ uint32_t tmp = I915_READ(PORT_DFT2_G4X);
+
+ WARN_ON(!IS_G4X(dev));
+
+ tmp |= DC_BALANCE_RESET_VLV;
+ if (pipe == PIPE_A)
+ tmp |= PIPE_A_SCRAMBLE_RESET;
+ else
+ tmp |= PIPE_B_SCRAMBLE_RESET;
+
+ I915_WRITE(PORT_DFT2_G4X, tmp);
+ }
+
return 0;
}
@@ -2120,6 +2140,22 @@ static int i9xx_pipe_crc_ctl_reg(struct drm_device *dev,
return 0;
}
+static void vlv_undo_pipe_scramble_reset(struct drm_device *dev,
+ enum pipe pipe)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t tmp = I915_READ(PORT_DFT2_G4X);
+
+ if (pipe == PIPE_A)
+ tmp &= ~PIPE_A_SCRAMBLE_RESET;
+ else
+ tmp &= ~PIPE_B_SCRAMBLE_RESET;
+ if (!(tmp & PIPE_SCRAMBLE_RESET_MASK))
+ tmp &= ~DC_BALANCE_RESET_VLV;
+ I915_WRITE(PORT_DFT2_G4X, tmp);
+
+}
+
static void g4x_undo_pipe_scramble_reset(struct drm_device *dev,
enum pipe pipe)
{
@@ -2259,6 +2295,8 @@ static int pipe_crc_set_source(struct drm_device *dev, enum pipe pipe,
if (IS_G4X(dev))
g4x_undo_pipe_scramble_reset(dev, pipe);
+ else if (IS_VALLEYVIEW(dev))
+ vlv_undo_pipe_scramble_reset(dev, pipe);
}
return 0;
--
1.8.4.rc3
More information about the Intel-gfx
mailing list