[Intel-gfx] [PATCH 2/5] drm/i915: retrieve current fb config into new plane_config structure at init

[Jesse Barnes]

On Sat, 23 Nov 2013 01:08:17 +0200
Ville Syrjälä <ville.syrjala at linux.intel.com> wrote:

> On Fri, Nov 22, 2013 at 01:55:35PM -0800, Jesse Barnes wrote:
> > On Wed, 20 Nov 2013 15:10:39 +0200
> > Ville Syrjälä <ville.syrjala at linux.intel.com> wrote:
> > > > +	case DISPPLANE_8BPP:
> > > > +		return DRM_FORMAT_C8;
> > > > +	case DISPPLANE_BGRX555:
> > > > +		return DRM_FORMAT_ARGB1555;
> > >                                   ^
> > > X
> > 
> > Oops fixed, thanks.  These formats are a lot of typing.
> > 
> > > > +	case DISPPLANE_RGBA888:
> > > > +	case DISPPLANE_RGBX101010:
> > > > +	case DISPPLANE_RGBA101010:
> > > > +	case DISPPLANE_BGRX101010:
> > > > +		plane_config->bpp = 32;
> > > > +		break;
> > > > +	}
> > > 
> > > Maybe just intel_format_to_fourcc()+drm_format_plane_cpp() or something.
> > > Just to avoid duplicating essentially the same code.
> > 
> > Ah yeah, good idea, fixed.
> > 
> > > > +	val = I915_READ(HTOTAL(pipe));
> > > > +	plane_config->fb_width = (val & 0xffff) + 1;
> > > > +	val = I915_READ(VTOTAL(pipe));
> > > > +	plane_config->fb_height = (val & 0xffff) + 1;
> > > 
> > > Why make the fb the size of htotal/vtotal? pipe src size should be all
> > > we need.
> > 
> > Ok fixed.  Are there no cases where they'll be different?  Maybe
> > centered modes would have a pipesrc that differs from the
> > htotal/vtotal?  But even in that case we just want the pipesrc.
> 
> htotal/vtotal should have nothing to do with the fb dimensions.
> pipesrc (or plane w/h if we had such registers for primary planes)
> are the only things we can really tell. The information whether
> the fb was orignally larger than that can't be recovered.

We couldn't get that from the scaling regs?  If you're up or
downscaling, don't you have to specify a factor somewhere?  Either in
the pfit regs or the sprite scaling regs?

-- 
Jesse Barnes, Intel Open Source Technology Center