[Intel-gfx] [PATCH] drm/edid: parse the list of additional 3D modes

Thomas Wood thomas.wood at intel.com
Fri Nov 29 19:18:58 CET 2013


Parse 2D_VIC_order_X and 3D_Structure_X from the list at the end of the
HDMI Vendor Specific Data Block.

v2: Use an offset value depending on 3D_Multi_present and add
    detail_present. (Ville Syrjälä)
v3: Make sure the list is parsed even if 3D_Structure_ALL/MASK is not
    present. (Ville Syrjälä)
    Fix one length check and remove another. (Ville Syrjälä)

Signed-off-by: Thomas Wood <thomas.wood at intel.com>
---
 drivers/gpu/drm/drm_edid.c | 94 +++++++++++++++++++++++++++++++++++-----------
 1 file changed, 73 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index f1d6e1e..4c82a80 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -2734,7 +2734,7 @@ static int
 do_hdmi_vsdb_modes(struct drm_connector *connector, const u8 *db, u8 len,
 		   const u8 *video_db, u8 video_len)
 {
-	int modes = 0, offset = 0, i, multi_present = 0;
+	int modes = 0, offset = 0, i, multi_present = 0, multi_len;
 	u8 vic_len, hdmi_3d_len = 0;
 	u16 mask;
 	u16 structure_all;
@@ -2780,32 +2780,84 @@ do_hdmi_vsdb_modes(struct drm_connector *connector, const u8 *db, u8 len,
 	}
 	offset += 1 + vic_len;
 
-	if (!(multi_present == 1 || multi_present == 2))
-		goto out;
+	if (multi_present == 1)
+		multi_len = 2;
+	else if (multi_present == 2)
+		multi_len = 4;
+	else
+		multi_len = 0;
 
-	if ((multi_present == 1 && len < (9 + offset)) ||
-	    (multi_present == 2 && len < (11 + offset)))
+	if (len < (8 + offset + hdmi_3d_len - 1))
 		goto out;
 
-	if ((multi_present == 1 && hdmi_3d_len < 2) ||
-	    (multi_present == 2 && hdmi_3d_len < 4))
+	if (hdmi_3d_len < multi_len)
 		goto out;
 
-	/* 3D_Structure_ALL */
-	structure_all = (db[8 + offset] << 8) | db[9 + offset];
+	if (multi_present == 1 || multi_present == 2) {
+		/* 3D_Structure_ALL */
+		structure_all = (db[8 + offset] << 8) | db[9 + offset];
 
-	/* check if 3D_MASK is present */
-	if (multi_present == 2)
-		mask = (db[10 + offset] << 8) | db[11 + offset];
-	else
-		mask = 0xffff;
-
-	for (i = 0; i < 16; i++) {
-		if (mask & (1 << i))
-			modes += add_3d_struct_modes(connector,
-						     structure_all,
-						     video_db,
-						     video_len, i);
+		/* check if 3D_MASK is present */
+		if (multi_present == 2)
+			mask = (db[10 + offset] << 8) | db[11 + offset];
+		else
+			mask = 0xffff;
+
+		for (i = 0; i < 16; i++) {
+			if (mask & (1 << i))
+				modes += add_3d_struct_modes(connector,
+						structure_all,
+						video_db,
+						video_len, i);
+		}
+	}
+
+	offset += multi_len;
+
+	for (i = 0; i < (hdmi_3d_len - multi_len); i++) {
+		int vic_index;
+		struct drm_display_mode *newmode = NULL;
+		unsigned int newflag = 0;
+		bool detail_present;
+
+		detail_present = ((db[8 + offset + i] & 0x0f) > 7);
+
+		if (detail_present && (i + 1 == hdmi_3d_len - multi_len))
+			break;
+
+		/* 2D_VIC_order_X */
+		vic_index = db[8 + offset + i] >> 4;
+
+		/* 3D_Structure_X */
+		switch (db[8 + offset + i] & 0x0f) {
+		case 0:
+			newflag = DRM_MODE_FLAG_3D_FRAME_PACKING;
+			break;
+		case 6:
+			newflag = DRM_MODE_FLAG_3D_TOP_AND_BOTTOM;
+			break;
+		case 8:
+			/* 3D_Detail_X */
+			if ((db[9 + offset + i] >> 4) == 1)
+				newflag = DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF;
+			break;
+		}
+
+		if (newflag != 0) {
+			newmode = drm_display_mode_from_vic_index(connector,
+								  video_db,
+								  video_len,
+								  vic_index);
+
+			if (newmode) {
+				newmode->flags |= newflag;
+				drm_mode_probed_add(connector, newmode);
+				modes++;
+			}
+		}
+
+		if (detail_present)
+			i++;
 	}
 
 out:
-- 
1.8.4.2




More information about the Intel-gfx mailing list