[Intel-gfx] [PATCH] drm/i915: Simplify PSR debugfs
Daniel Vetter
daniel at ffwll.ch
Thu Oct 3 19:58:25 CEST 2013
On Tue, Oct 01, 2013 at 03:26:29PM -0300, Rodrigo Vivi wrote:
> for igt test case.
>
> Signed-off-by: Rodrigo Vivi <rodrigo.vivi at gmail.com>
Tried to apply this but it conflicted. Then I've noticed that there's some
trailing whitespace ;-) Can you please rebase on dinq and resend?
-Daniel
> ---
> drivers/gpu/drm/i915/i915_debugfs.c | 126 +++---------------------------------
> drivers/gpu/drm/i915/i915_drv.h | 16 ++---
> drivers/gpu/drm/i915/intel_dp.c | 35 +++++-----
> 3 files changed, 28 insertions(+), 149 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> index a6f4cb5..ada12f7 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -1655,126 +1655,18 @@ static int i915_edp_psr_status(struct seq_file *m, void *data)
> struct drm_info_node *node = m->private;
> struct drm_device *dev = node->minor->dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> - u32 psrstat, psrperf;
> + u32 psrperf = 0;
> + bool enabled = false;
>
> - if (!IS_HASWELL(dev)) {
> - seq_puts(m, "PSR not supported on this platform\n");
> - } else if (IS_HASWELL(dev) && I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE) {
> - seq_puts(m, "PSR enabled\n");
> - } else {
> - seq_puts(m, "PSR disabled: ");
> - switch (dev_priv->no_psr_reason) {
> - case PSR_NO_SOURCE:
> - seq_puts(m, "not supported on this platform");
> - break;
> - case PSR_NO_SINK:
> - seq_puts(m, "not supported by panel");
> - break;
> - case PSR_MODULE_PARAM:
> - seq_puts(m, "disabled by flag");
> - break;
> - case PSR_CRTC_NOT_ACTIVE:
> - seq_puts(m, "crtc not active");
> - break;
> - case PSR_PWR_WELL_ENABLED:
> - seq_puts(m, "power well enabled");
> - break;
> - case PSR_NOT_TILED:
> - seq_puts(m, "not tiled");
> - break;
> - case PSR_SPRITE_ENABLED:
> - seq_puts(m, "sprite enabled");
> - break;
> - case PSR_S3D_ENABLED:
> - seq_puts(m, "stereo 3d enabled");
> - break;
> - case PSR_INTERLACED_ENABLED:
> - seq_puts(m, "interlaced enabled");
> - break;
> - case PSR_HSW_NOT_DDIA:
> - seq_puts(m, "HSW ties PSR to DDI A (eDP)");
> - break;
> - default:
> - seq_puts(m, "unknown reason");
> - }
> - seq_puts(m, "\n");
> - return 0;
> - }
> -
> - psrstat = I915_READ(EDP_PSR_STATUS_CTL);
> -
> - seq_puts(m, "PSR Current State: ");
> - switch (psrstat & EDP_PSR_STATUS_STATE_MASK) {
> - case EDP_PSR_STATUS_STATE_IDLE:
> - seq_puts(m, "Reset state\n");
> - break;
> - case EDP_PSR_STATUS_STATE_SRDONACK:
> - seq_puts(m, "Wait for TG/Stream to send on frame of data after SRD conditions are met\n");
> - break;
> - case EDP_PSR_STATUS_STATE_SRDENT:
> - seq_puts(m, "SRD entry\n");
> - break;
> - case EDP_PSR_STATUS_STATE_BUFOFF:
> - seq_puts(m, "Wait for buffer turn off\n");
> - break;
> - case EDP_PSR_STATUS_STATE_BUFON:
> - seq_puts(m, "Wait for buffer turn on\n");
> - break;
> - case EDP_PSR_STATUS_STATE_AUXACK:
> - seq_puts(m, "Wait for AUX to acknowledge on SRD exit\n");
> - break;
> - case EDP_PSR_STATUS_STATE_SRDOFFACK:
> - seq_puts(m, "Wait for TG/Stream to acknowledge the SRD VDM exit\n");
> - break;
> - default:
> - seq_puts(m, "Unknown\n");
> - break;
> - }
> -
> - seq_puts(m, "Link Status: ");
> - switch (psrstat & EDP_PSR_STATUS_LINK_MASK) {
> - case EDP_PSR_STATUS_LINK_FULL_OFF:
> - seq_puts(m, "Link is fully off\n");
> - break;
> - case EDP_PSR_STATUS_LINK_FULL_ON:
> - seq_puts(m, "Link is fully on\n");
> - break;
> - case EDP_PSR_STATUS_LINK_STANDBY:
> - seq_puts(m, "Link is in standby\n");
> - break;
> - default:
> - seq_puts(m, "Unknown\n");
> - break;
> - }
> -
> - seq_printf(m, "PSR Entry Count: %u\n",
> - psrstat >> EDP_PSR_STATUS_COUNT_SHIFT &
> - EDP_PSR_STATUS_COUNT_MASK);
> -
> - seq_printf(m, "Max Sleep Timer Counter: %u\n",
> - psrstat >> EDP_PSR_STATUS_MAX_SLEEP_TIMER_SHIFT &
> - EDP_PSR_STATUS_MAX_SLEEP_TIMER_MASK);
> -
> - seq_printf(m, "Had AUX error: %s\n",
> - yesno(psrstat & EDP_PSR_STATUS_AUX_ERROR));
> -
> - seq_printf(m, "Sending AUX: %s\n",
> - yesno(psrstat & EDP_PSR_STATUS_AUX_SENDING));
> -
> - seq_printf(m, "Sending Idle: %s\n",
> - yesno(psrstat & EDP_PSR_STATUS_SENDING_IDLE));
> -
> - seq_printf(m, "Sending TP2 TP3: %s\n",
> - yesno(psrstat & EDP_PSR_STATUS_SENDING_TP2_TP3));
> -
> - seq_printf(m, "Sending TP1: %s\n",
> - yesno(psrstat & EDP_PSR_STATUS_SENDING_TP1));
> + seq_printf(m, "Sink_Support: %s\n", yesno(dev_priv->psr.sink_support));
> + seq_printf(m, "Source_OK: %s\n", yesno(dev_priv->psr.source_ok));
>
> - seq_printf(m, "Idle Count: %u\n",
> - psrstat & EDP_PSR_STATUS_IDLE_MASK);
> + enabled = IS_HASWELL(dev) && I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE;
> + seq_printf(m, "Enabled: %s\n", yesno(enabled));
>
> - psrperf = (I915_READ(EDP_PSR_PERF_CNT)) & EDP_PSR_PERF_CNT_MASK;
> - seq_printf(m, "Performance Counter: %u\n", psrperf);
> + if (IS_HASWELL(dev))
> + psrperf = (I915_READ(EDP_PSR_PERF_CNT)) & EDP_PSR_PERF_CNT_MASK;
> + seq_printf(m, "Performance_Counter: %u\n", psrperf);
>
> return 0;
> }
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 35874b3..cad2207 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -621,17 +621,9 @@ struct i915_fbc {
> } no_fbc_reason;
> };
>
> -enum no_psr_reason {
> - PSR_NO_SOURCE, /* Not supported on platform */
> - PSR_NO_SINK, /* Not supported by panel */
> - PSR_MODULE_PARAM,
> - PSR_CRTC_NOT_ACTIVE,
> - PSR_PWR_WELL_ENABLED,
> - PSR_NOT_TILED,
> - PSR_SPRITE_ENABLED,
> - PSR_S3D_ENABLED,
> - PSR_INTERLACED_ENABLED,
> - PSR_HSW_NOT_DDIA,
> +struct i915_psr {
> + bool sink_support;
> + bool source_ok;
> };
>
> enum intel_pch {
> @@ -1298,7 +1290,7 @@ typedef struct drm_i915_private {
> /* Haswell power well */
> struct i915_power_well power_well;
>
> - enum no_psr_reason no_psr_reason;
> + struct i915_psr psr;
>
> struct i915_gpu_error gpu_error;
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index ff3e8b9..524d3d5 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -1392,10 +1392,11 @@ static void intel_dp_get_config(struct intel_encoder *encoder,
> }
> }
>
> -static bool is_edp_psr(struct intel_dp *intel_dp)
> +static bool is_edp_psr(struct drm_device *dev)
> {
> - return is_edp(intel_dp) &&
> - intel_dp->psr_dpcd[0] & DP_PSR_IS_SUPPORTED;
> + struct drm_i915_private *dev_priv = dev->dev_private;
> +
> + return dev_priv->psr.sink_support;
> }
>
> static bool intel_edp_is_psr_enabled(struct drm_device *dev)
> @@ -1522,42 +1523,33 @@ static bool intel_edp_psr_match_conditions(struct intel_dp *intel_dp)
> struct drm_i915_gem_object *obj = to_intel_framebuffer(crtc->fb)->obj;
> struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base;
>
> + dev_priv->psr.source_ok = false;
> +
> if (!IS_HASWELL(dev)) {
> DRM_DEBUG_KMS("PSR not supported on this platform\n");
> - dev_priv->no_psr_reason = PSR_NO_SOURCE;
> return false;
> }
>
> if ((intel_encoder->type != INTEL_OUTPUT_EDP) ||
> (dig_port->port != PORT_A)) {
> DRM_DEBUG_KMS("HSW ties PSR to DDI A (eDP)\n");
> - dev_priv->no_psr_reason = PSR_HSW_NOT_DDIA;
> - return false;
> - }
> -
> - if (!is_edp_psr(intel_dp)) {
> - DRM_DEBUG_KMS("PSR not supported by this panel\n");
> - dev_priv->no_psr_reason = PSR_NO_SINK;
> return false;
> }
>
> if (!i915_enable_psr) {
> DRM_DEBUG_KMS("PSR disable by flag\n");
> - dev_priv->no_psr_reason = PSR_MODULE_PARAM;
> return false;
> }
>
> crtc = dig_port->base.base.crtc;
> if (crtc == NULL) {
> DRM_DEBUG_KMS("crtc not active for PSR\n");
> - dev_priv->no_psr_reason = PSR_CRTC_NOT_ACTIVE;
> return false;
> }
>
> intel_crtc = to_intel_crtc(crtc);
> if (!intel_crtc->active || !crtc->fb || !crtc->mode.clock) {
> DRM_DEBUG_KMS("crtc not active for PSR\n");
> - dev_priv->no_psr_reason = PSR_CRTC_NOT_ACTIVE;
> return false;
> }
>
> @@ -1565,29 +1557,26 @@ static bool intel_edp_psr_match_conditions(struct intel_dp *intel_dp)
> if (obj->tiling_mode != I915_TILING_X ||
> obj->fence_reg == I915_FENCE_REG_NONE) {
> DRM_DEBUG_KMS("PSR condition failed: fb not tiled or fenced\n");
> - dev_priv->no_psr_reason = PSR_NOT_TILED;
> return false;
> }
>
> if (I915_READ(SPRCTL(intel_crtc->pipe)) & SPRITE_ENABLE) {
> DRM_DEBUG_KMS("PSR condition failed: Sprite is Enabled\n");
> - dev_priv->no_psr_reason = PSR_SPRITE_ENABLED;
> return false;
> }
>
> if (I915_READ(HSW_STEREO_3D_CTL(intel_crtc->config.cpu_transcoder)) &
> S3D_ENABLE) {
> DRM_DEBUG_KMS("PSR condition failed: Stereo 3D is Enabled\n");
> - dev_priv->no_psr_reason = PSR_S3D_ENABLED;
> return false;
> }
>
> if (crtc->mode.flags & DRM_MODE_FLAG_INTERLACE) {
> DRM_DEBUG_KMS("PSR condition failed: Interlaced is Enabled\n");
> - dev_priv->no_psr_reason = PSR_INTERLACED_ENABLED;
> return false;
> }
>
> + dev_priv->psr.source_ok = true;
> return true;
> }
>
> @@ -1643,7 +1632,7 @@ void intel_edp_psr_update(struct drm_device *dev)
> if (encoder->type == INTEL_OUTPUT_EDP) {
> intel_dp = enc_to_intel_dp(&encoder->base);
>
> - if (!is_edp_psr(intel_dp))
> + if (!is_edp_psr(dev))
> return;
>
> if (!intel_edp_psr_match_conditions(intel_dp))
> @@ -2558,6 +2547,10 @@ intel_dp_link_down(struct intel_dp *intel_dp)
> static bool
> intel_dp_get_dpcd(struct intel_dp *intel_dp)
> {
> + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> + struct drm_device *dev = dig_port->base.base.dev;
> + struct drm_i915_private *dev_priv = dev->dev_private;
> +
> char dpcd_hex_dump[sizeof(intel_dp->dpcd) * 3];
>
> if (intel_dp_aux_native_read_retry(intel_dp, 0x000, intel_dp->dpcd,
> @@ -2576,8 +2569,10 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
> intel_dp_aux_native_read_retry(intel_dp, DP_PSR_SUPPORT,
> intel_dp->psr_dpcd,
> sizeof(intel_dp->psr_dpcd));
> - if (is_edp_psr(intel_dp))
> + if (intel_dp->psr_dpcd[0] & DP_PSR_IS_SUPPORTED) {
> + dev_priv->psr.sink_support = true;
> DRM_DEBUG_KMS("Detected EDP PSR Panel.\n");
> + }
> if (!(intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] &
> DP_DWN_STRM_PORT_PRESENT))
> return true; /* native DP sink */
> --
> 1.7.11.7
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
More information about the Intel-gfx
mailing list