[Intel-gfx] [PATCH] drm/i915: disable LVDS clock gating on CPT v2
Jesse Barnes
jbarnes at virtuousgeek.org
Mon Oct 7 18:27:47 CEST 2013
Doesn't completely fix Uli's machine, but apparently it helps a bit, so:
Tested-by: Ulrich Drepper <drepper at gmail.com>
On Wed, 2 Oct 2013 10:34:19 -0700
Jesse Barnes <jbarnes at virtuousgeek.org> wrote:
> Needed to prevent display corruption in high res panels.
>
> v2: use correct unit names (Rodrigo)
>
> Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 2 ++
> drivers/gpu/drm/i915/intel_pm.c | 4 +++-
> 2 files changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 96fd2ce..b6312d9 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -4338,7 +4338,9 @@
> #define FDI_RX_CHICKEN(pipe) _PIPE(pipe, _FDI_RXA_CHICKEN, _FDI_RXB_CHICKEN)
>
> #define SOUTH_DSPCLK_GATE_D 0xc2020
> +#define PCH_DPLUNIT_CLOCK_GATE_DISABLE (1<<30)
> #define PCH_DPLSUNIT_CLOCK_GATE_DISABLE (1<<29)
> +#define PCH_CPUNIT_CLOCK_GATE_DISABLE (1<<14)
> #define PCH_LP_PARTITION_LEVEL_DISABLE (1<<12)
>
> /* CPU: FDI_TX */
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 698257c..9443f8e 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -4791,7 +4791,9 @@ static void cpt_init_clock_gating(struct drm_device *dev)
> * gating for the panel power sequencer or it will fail to
> * start up when no ports are active.
> */
> - I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE);
> + I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE |
> + PCH_DPLUNIT_CLOCK_GATE_DISABLE |
> + PCH_CPUNIT_CLOCK_GATE_DISABLE);
> I915_WRITE(SOUTH_CHICKEN2, I915_READ(SOUTH_CHICKEN2) |
> DPLS_EDP_PPS_FIX_DIS);
> /* The below fixes the weird display corruption, a few pixels shifted
--
Jesse Barnes, Intel Open Source Technology Center
More information about the Intel-gfx
mailing list