[Intel-gfx] [PATCH 3/7] drm/i915/vlv: use per-pipe backlight controls v2
Jani Nikula
jani.nikula at intel.com
Thu Oct 31 17:55:50 CET 2013
From: Jesse Barnes <jbarnes at virtuousgeek.org>
With the connector and pipe passed around, we can now set the backlight
on the right pipe on VLV/BYT.
v2: drop combination mode check for VLV (Jani)
add save/restore code for VLV backlight regs (Jani)
check for existing modulation freq when initializing backlight regs (Jani)
Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
drivers/gpu/drm/i915/i915_drv.h | 3 ++
drivers/gpu/drm/i915/i915_reg.h | 15 ++++++++
drivers/gpu/drm/i915/i915_suspend.c | 29 +++++++++++++++
drivers/gpu/drm/i915/intel_panel.c | 67 ++++++++++++++++++++++++++++-------
4 files changed, 102 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 83eda64..16fae30 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -745,6 +745,9 @@ struct i915_suspend_saved_registers {
u32 saveBLC_HIST_CTL;
u32 saveBLC_PWM_CTL;
u32 saveBLC_PWM_CTL2;
+ u32 saveBLC_HIST_CTL_B;
+ u32 saveBLC_PWM_CTL_B;
+ u32 saveBLC_PWM_CTL2_B;
u32 saveBLC_CPU_PWM_CTL;
u32 saveBLC_CPU_PWM_CTL2;
u32 saveFPB0;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 4d2db59..e2f3dd4 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2387,6 +2387,21 @@
#define PFIT_AUTO_RATIOS (dev_priv->info->display_mmio_offset + 0x61238)
+#define _VLV_BLC_PWM_CTL2_A (dev_priv->info->display_mmio_offset + 0x61250)
+#define _VLV_BLC_PWM_CTL2_B (dev_priv->info->display_mmio_offset + 0x61350)
+#define VLV_BLC_PWM_CTL2(pipe) _PIPE(pipe, _VLV_BLC_PWM_CTL2_A, \
+ _VLV_BLC_PWM_CTL2_B)
+
+#define _VLV_BLC_PWM_CTL_A (dev_priv->info->display_mmio_offset + 0x61254)
+#define _VLV_BLC_PWM_CTL_B (dev_priv->info->display_mmio_offset + 0x61354)
+#define VLV_BLC_PWM_CTL(pipe) _PIPE(pipe, _VLV_BLC_PWM_CTL_A, \
+ _VLV_BLC_PWM_CTL_B)
+
+#define _VLV_BLC_HIST_CTL_A (dev_priv->info->display_mmio_offset + 0x61260)
+#define _VLV_BLC_HIST_CTL_B (dev_priv->info->display_mmio_offset + 0x61360)
+#define VLV_BLC_HIST_CTL(pipe) _PIPE(pipe, _VLV_BLC_HIST_CTL_A, \
+ _VLV_BLC_HIST_CTL_B)
+
/* Backlight control */
#define BLC_PWM_CTL2 (dev_priv->info->display_mmio_offset + 0x61250) /* 965+ only */
#define BLM_PWM_ENABLE (1 << 31)
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index a088f1f..98790c7 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -214,6 +214,22 @@ static void i915_save_display(struct drm_device *dev)
dev_priv->regfile.saveBLC_CPU_PWM_CTL2 = I915_READ(BLC_PWM_CPU_CTL2);
if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
dev_priv->regfile.saveLVDS = I915_READ(PCH_LVDS);
+ } else if (IS_VALLEYVIEW(dev)) {
+ dev_priv->regfile.savePP_CONTROL = I915_READ(PP_CONTROL);
+ dev_priv->regfile.savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS);
+
+ dev_priv->regfile.saveBLC_PWM_CTL =
+ I915_READ(VLV_BLC_PWM_CTL(PIPE_A));
+ dev_priv->regfile.saveBLC_HIST_CTL =
+ I915_READ(VLV_BLC_HIST_CTL(PIPE_A));
+ dev_priv->regfile.saveBLC_PWM_CTL2 =
+ I915_READ(VLV_BLC_PWM_CTL2(PIPE_A));
+ dev_priv->regfile.saveBLC_PWM_CTL_B =
+ I915_READ(VLV_BLC_PWM_CTL(PIPE_B));
+ dev_priv->regfile.saveBLC_HIST_CTL_B =
+ I915_READ(VLV_BLC_HIST_CTL(PIPE_B));
+ dev_priv->regfile.saveBLC_PWM_CTL2_B =
+ I915_READ(VLV_BLC_PWM_CTL2(PIPE_B));
} else {
dev_priv->regfile.savePP_CONTROL = I915_READ(PP_CONTROL);
dev_priv->regfile.savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS);
@@ -302,6 +318,19 @@ static void i915_restore_display(struct drm_device *dev)
I915_WRITE(PCH_PP_CONTROL, dev_priv->regfile.savePP_CONTROL);
I915_WRITE(RSTDBYCTL,
dev_priv->regfile.saveMCHBAR_RENDER_STANDBY);
+ } else if (IS_VALLEYVIEW(dev)) {
+ I915_WRITE(VLV_BLC_PWM_CTL(PIPE_A),
+ dev_priv->regfile.saveBLC_PWM_CTL);
+ I915_WRITE(VLV_BLC_HIST_CTL(PIPE_A),
+ dev_priv->regfile.saveBLC_HIST_CTL);
+ I915_WRITE(VLV_BLC_PWM_CTL2(PIPE_A),
+ dev_priv->regfile.saveBLC_PWM_CTL2);
+ I915_WRITE(VLV_BLC_PWM_CTL(PIPE_B),
+ dev_priv->regfile.saveBLC_PWM_CTL);
+ I915_WRITE(VLV_BLC_HIST_CTL(PIPE_B),
+ dev_priv->regfile.saveBLC_HIST_CTL);
+ I915_WRITE(VLV_BLC_PWM_CTL2(PIPE_B),
+ dev_priv->regfile.saveBLC_PWM_CTL2);
} else {
I915_WRITE(PFIT_PGM_RATIOS, dev_priv->regfile.savePFIT_PGM_RATIOS);
I915_WRITE(BLC_PWM_CTL, dev_priv->regfile.saveBLC_PWM_CTL);
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index 0f1ebc8..f161ac0 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -358,6 +358,21 @@ static u32 i915_read_blc_pwm_ctl(struct drm_device *dev, enum pipe pipe)
val = dev_priv->regfile.saveBLC_PWM_CTL2;
I915_WRITE(BLC_PWM_PCH_CTL2, val);
}
+ } else if (IS_VALLEYVIEW(dev)) {
+ val = I915_READ(VLV_BLC_PWM_CTL(pipe));
+ if (dev_priv->regfile.saveBLC_PWM_CTL == 0) {
+ dev_priv->regfile.saveBLC_PWM_CTL = val;
+ dev_priv->regfile.saveBLC_PWM_CTL2 =
+ I915_READ(VLV_BLC_PWM_CTL2(pipe));
+ } else if (val == 0) {
+ val = dev_priv->regfile.saveBLC_PWM_CTL;
+ I915_WRITE(VLV_BLC_PWM_CTL(pipe), val);
+ I915_WRITE(VLV_BLC_PWM_CTL2(pipe),
+ dev_priv->regfile.saveBLC_PWM_CTL2);
+ }
+
+ if (!val)
+ val = 0x0f42ffff;
} else {
val = I915_READ(BLC_PWM_CTL);
if (dev_priv->regfile.saveBLC_PWM_CTL == 0) {
@@ -372,9 +387,6 @@ static u32 i915_read_blc_pwm_ctl(struct drm_device *dev, enum pipe pipe)
I915_WRITE(BLC_PWM_CTL2,
dev_priv->regfile.saveBLC_PWM_CTL2);
}
-
- if (IS_VALLEYVIEW(dev) && !val)
- val = 0x0f42ffff;
}
return val;
@@ -435,13 +447,19 @@ static u32 intel_panel_get_backlight(struct drm_device *dev,
struct drm_i915_private *dev_priv = dev->dev_private;
u32 val;
unsigned long flags;
+ int reg;
spin_lock_irqsave(&dev_priv->backlight.lock, flags);
if (HAS_PCH_SPLIT(dev)) {
val = I915_READ(BLC_PWM_CPU_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
} else {
- val = I915_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
+ if (IS_VALLEYVIEW(dev))
+ reg = VLV_BLC_PWM_CTL(pipe);
+ else
+ reg = BLC_PWM_CTL;
+
+ val = I915_READ(reg) & BACKLIGHT_DUTY_CYCLE_MASK;
if (INTEL_INFO(dev)->gen < 4)
val >>= 1;
@@ -473,6 +491,7 @@ static void intel_panel_actually_set_backlight(struct drm_device *dev,
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 tmp;
+ int reg;
DRM_DEBUG_DRIVER("set backlight PWM = %d\n", level);
level = intel_panel_compute_brightness(dev, pipe, level);
@@ -493,11 +512,16 @@ static void intel_panel_actually_set_backlight(struct drm_device *dev,
pci_write_config_byte(dev->pdev, PCI_LBPC, lbpc);
}
- tmp = I915_READ(BLC_PWM_CTL);
+ if (IS_VALLEYVIEW(dev))
+ reg = VLV_BLC_PWM_CTL(pipe);
+ else
+ reg = BLC_PWM_CTL;
+
+ tmp = I915_READ(reg);
if (INTEL_INFO(dev)->gen < 4)
level <<= 1;
tmp &= ~BACKLIGHT_DUTY_CYCLE_MASK;
- I915_WRITE(BLC_PWM_CTL, tmp | level);
+ I915_WRITE(reg, tmp | level);
}
/* set backlight brightness to level in range [0..max] */
@@ -566,7 +590,12 @@ void intel_panel_disable_backlight(struct intel_connector *connector)
if (INTEL_INFO(dev)->gen >= 4) {
uint32_t reg, tmp;
- reg = HAS_PCH_SPLIT(dev) ? BLC_PWM_CPU_CTL2 : BLC_PWM_CTL2;
+ if (HAS_PCH_SPLIT(dev))
+ reg = BLC_PWM_CPU_CTL2;
+ else if (IS_VALLEYVIEW(dev))
+ reg = VLV_BLC_PWM_CTL2(pipe);
+ else
+ reg = BLC_PWM_CTL2;
I915_WRITE(reg, I915_READ(reg) & ~BLM_PWM_ENABLE);
@@ -607,8 +636,12 @@ void intel_panel_enable_backlight(struct intel_connector *connector)
if (INTEL_INFO(dev)->gen >= 4) {
uint32_t reg, tmp;
- reg = HAS_PCH_SPLIT(dev) ? BLC_PWM_CPU_CTL2 : BLC_PWM_CTL2;
-
+ if (HAS_PCH_SPLIT(dev))
+ reg = BLC_PWM_CPU_CTL2;
+ else if (IS_VALLEYVIEW(dev))
+ reg = VLV_BLC_PWM_CTL2(pipe);
+ else
+ reg = BLC_PWM_CTL2;
tmp = I915_READ(reg);
@@ -660,9 +693,19 @@ static void intel_panel_init_backlight_regs(struct drm_device *dev)
struct drm_i915_private *dev_priv = dev->dev_private;
if (IS_VALLEYVIEW(dev)) {
- u32 cur_val = I915_READ(BLC_PWM_CTL) &
- BACKLIGHT_DUTY_CYCLE_MASK;
- I915_WRITE(BLC_PWM_CTL, (0xf42 << 16) | cur_val);
+ enum pipe pipe;
+
+ for_each_pipe(pipe) {
+ u32 cur_val = I915_READ(VLV_BLC_PWM_CTL(pipe));
+
+ /* Skip if the modulation freq is already set */
+ if (cur_val & ~BACKLIGHT_DUTY_CYCLE_MASK)
+ continue;
+
+ cur_val &= BACKLIGHT_DUTY_CYCLE_MASK;
+ I915_WRITE(VLV_BLC_PWM_CTL(pipe), (0xf42 << 16) |
+ cur_val);
+ }
}
}
--
1.7.10.4
More information about the Intel-gfx
mailing list