[Intel-gfx] [PATCH 5/7] intel_gtt: Properly support gen6+ GTT PTEs
Ben Widawsky
benjamin.widawsky at intel.com
Sun Sep 1 21:51:24 CEST 2013
This finishes the objective in the last patch which was to actually deal
with physical addresses, and not the PTEs.
GEN6+ Provided support for physical addresses above 4GB. I'm not
actually sure what Ironlake supported, and don't feel like firing up the
timemachine.
Haswell caveat is coming up next.
Signed-off-by: Ben Widawsky <ben at bwidawsk.net>
---
tools/intel_gtt.c | 26 ++++++++++++++++++--------
1 file changed, 18 insertions(+), 8 deletions(-)
diff --git a/tools/intel_gtt.c b/tools/intel_gtt.c
index 32a6618..874a4f6 100644
--- a/tools/intel_gtt.c
+++ b/tools/intel_gtt.c
@@ -25,6 +25,8 @@
*
*/
+#define __STDC_FORMAT_MACROS
+#include <inttypes.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
@@ -37,18 +39,26 @@
#define KB(x) ((x) * 1024)
#define MB(x) ((x) * 1024 * 1024)
unsigned char *gtt;
+uint32_t devid;
#define INGTT(offset) (*(volatile uint32_t *)(gtt + (offset) / (KB(4) / 4)))
static uint64_t get_phys(uint32_t pt_offset)
{
- return INGTT(pt_offset);
+ uint64_t pae = 0;
+ uint64_t phys = INGTT(pt_offset);
+
+ if (intel_gen(devid) < 6)
+ return phys;
+
+ pae = (phys & 0xff0) << 28;
+
+ return (phys | pae) & ~0xfff;
}
int main(int argc, char **argv)
{
struct pci_device *pci_dev;
int start, aper_size;
- uint32_t devid;
int flag[] = {
PCI_DEV_MAP_FLAG_WRITE_COMBINE,
PCI_DEV_MAP_FLAG_WRITABLE,
@@ -94,14 +104,14 @@ int main(int argc, char **argv)
aper_size = pci_dev->regions[2].size;
for (start = 0; start < aper_size; start += KB(4)) {
- uint32_t start_phys = INGTT(start);
+ uint64_t start_phys = get_phys(start);
uint32_t end;
int constant_length = 0;
int linear_length = 0;
/* Check if it's a linear sequence */
for (end = start + KB(4); end < aper_size; end += KB(4)) {
- uint32_t end_phys = INGTT(end);
+ uint64_t end_phys = get_phys(end);
if (end_phys == start_phys + (end - start))
linear_length++;
else
@@ -109,7 +119,7 @@ int main(int argc, char **argv)
}
if (linear_length > 0) {
printf("0x%08x - 0x%08x: linear from "
- "0x%08x to 0x%08x\n",
+ "0x%" PRIx64 " to 0x%" PRIx64 "\n",
start, end - KB(4),
start_phys, start_phys + (end - start) - KB(4));
start = end - KB(4);
@@ -118,20 +128,20 @@ int main(int argc, char **argv)
/* Check if it's a constant sequence */
for (end = start + KB(4); end < aper_size; end += KB(4)) {
- uint32_t end_phys = INGTT(end);
+ uint64_t end_phys = get_phys(end);
if (end_phys == start_phys)
constant_length++;
else
break;
}
if (constant_length > 0) {
- printf("0x%08x - 0x%08x: constant 0x%08x\n",
+ printf("0x%08x - 0x%08x: constant 0x%" PRIx64 "\n",
start, end - KB(4), start_phys);
start = end - KB(4);
continue;
}
- printf("0x%08x: 0x%08x\n", start, start_phys);
+ printf("0x%08x: 0x%" PRIx64 "\n", start, start_phys);
}
return 0;
--
1.8.4
More information about the Intel-gfx
mailing list