[Intel-gfx] [PATCH 2/2] drm/i915: Make adjusted_mode.clock non-pixel multiplied

[ville.syrjala at linux.intel.com]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

It would be easier if adjusted_mode.clock would be the pipe pixel clock,
and it actually is, except for the cases where pixel_multiplier > 1.

So let's change intel_sdvo to use port_clock as the multiplied clock,
and then we can leave adjusted_mode.clock as pipe pixel clock.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 10 ++++------
 drivers/gpu/drm/i915/intel_sdvo.c    |  3 +--
 2 files changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 1ed042d..3bd9a72 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4095,7 +4095,6 @@ retry:
 	link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
 
 	fdi_dotclock = adjusted_mode->clock;
-	fdi_dotclock /= pipe_config->pixel_multiplier;
 
 	lane = ironlake_get_lanes_required(fdi_dotclock, link_bw,
 					   pipe_config->pipe_bpp);
@@ -7362,8 +7361,7 @@ static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
 		}
 	}
 
-	pipe_config->adjusted_mode.clock = clock.dot *
-		pipe_config->pixel_multiplier;
+	pipe_config->adjusted_mode.clock = clock.dot;
 }
 
 static void ironlake_crtc_clock_get(struct intel_crtc *crtc,
@@ -7408,8 +7406,7 @@ static void ironlake_crtc_clock_get(struct intel_crtc *crtc,
 	clock = ((u64)link_m * (u64)link_freq);
 	do_div(clock, link_n);
 
-	pipe_config->adjusted_mode.clock = clock *
-		pipe_config->pixel_multiplier;
+	pipe_config->adjusted_mode.clock = clock;
 }
 
 /** Returns the currently programmed mode of the given pipe. */
@@ -8360,7 +8357,8 @@ encoder_retry:
 	/* Set default port clock if not overwritten by the encoder. Needs to be
 	 * done afterwards in case the encoder adjusts the mode. */
 	if (!pipe_config->port_clock)
-		pipe_config->port_clock = pipe_config->adjusted_mode.clock;
+		pipe_config->port_clock = pipe_config->adjusted_mode.clock *
+			pipe_config->pixel_multiplier;
 
 	ret = intel_crtc_compute_config(to_intel_crtc(crtc), pipe_config);
 	if (ret < 0) {
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 317e058..3381a52 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1059,7 +1059,7 @@ intel_sdvo_get_preferred_input_mode(struct intel_sdvo *intel_sdvo,
 
 static void i9xx_adjust_sdvo_tv_clock(struct intel_crtc_config *pipe_config)
 {
-	unsigned dotclock = pipe_config->adjusted_mode.clock;
+	unsigned dotclock = pipe_config->port_clock;
 	struct dpll *clock = &pipe_config->dpll;
 
 	/* SDVO TV has fixed PLL values depend on its clock range,
@@ -1124,7 +1124,6 @@ static bool intel_sdvo_compute_config(struct intel_encoder *encoder,
 	 */
 	pipe_config->pixel_multiplier =
 		intel_sdvo_get_pixel_multiplier(adjusted_mode);
-	adjusted_mode->clock *= pipe_config->pixel_multiplier;
 
 	if (intel_sdvo->color_range_auto) {
 		/* See CEA-861-E - 5.1 Default Encoding Parameters */
-- 
1.8.1.5