[Intel-gfx] [PATCH 3/6] drm/i915: Make l3 remapping use the ring

Daniel Vetter daniel at ffwll.ch
Thu Sep 19 20:39:18 CEST 2013


On Tue, Sep 17, 2013 at 09:12:44PM -0700, Ben Widawsky wrote:
> Using LRI for setting the remapping registers allows us to stream l3
> remapping information. This is necessary to handle per context remaps as
> we'll see implemented in an upcoming patch.
> 
> Using the ring also means we don't need to frob the DOP clock gating
> bits.
> 
> v2: Add comment about lack of worry for concurrent register access
> (Daniel)
> 
> Signed-off-by: Ben Widawsky <ben at bwidawsk.net>

I've done a s/XXX/Note on the comment and converted it into the preferred
layout for multiline comments.
-Daniel

> ---
>  drivers/gpu/drm/i915/i915_drv.h   |  2 +-
>  drivers/gpu/drm/i915/i915_gem.c   | 38 ++++++++++++++++++--------------------
>  drivers/gpu/drm/i915/i915_sysfs.c |  3 ++-
>  3 files changed, 21 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index c6e8df7..0c39805 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1949,7 +1949,7 @@ bool i915_gem_clflush_object(struct drm_i915_gem_object *obj, bool force);
>  int __must_check i915_gem_object_finish_gpu(struct drm_i915_gem_object *obj);
>  int __must_check i915_gem_init(struct drm_device *dev);
>  int __must_check i915_gem_init_hw(struct drm_device *dev);
> -void i915_gem_l3_remap(struct drm_device *dev, int slice);
> +int i915_gem_l3_remap(struct intel_ring_buffer *ring, int slice);
>  void i915_gem_init_swizzling(struct drm_device *dev);
>  void i915_gem_cleanup_ringbuffer(struct drm_device *dev);
>  int __must_check i915_gpu_idle(struct drm_device *dev);
> diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
> index 66bf75d..2538138 100644
> --- a/drivers/gpu/drm/i915/i915_gem.c
> +++ b/drivers/gpu/drm/i915/i915_gem.c
> @@ -4252,35 +4252,33 @@ i915_gem_idle(struct drm_device *dev)
>  	return 0;
>  }
>  
> -void i915_gem_l3_remap(struct drm_device *dev, int slice)
> +int i915_gem_l3_remap(struct intel_ring_buffer *ring, int slice)
>  {
> +	struct drm_device *dev = ring->dev;
>  	drm_i915_private_t *dev_priv = dev->dev_private;
>  	u32 reg_base = GEN7_L3LOG_BASE + (slice * 0x200);
>  	u32 *remap_info = dev_priv->l3_parity.remap_info[slice];
> -	u32 misccpctl;
> -	int i;
> +	int i, ret;
>  
>  	if (!HAS_L3_GPU_CACHE(dev) || !remap_info)
> -		return;
> +		return 0;
>  
> -	misccpctl = I915_READ(GEN7_MISCCPCTL);
> -	I915_WRITE(GEN7_MISCCPCTL, misccpctl & ~GEN7_DOP_CLOCK_GATE_ENABLE);
> -	POSTING_READ(GEN7_MISCCPCTL);
> +	ret = intel_ring_begin(ring, GEN7_L3LOG_SIZE / 4 * 3);
> +	if (ret)
> +		return ret;
>  
> +	/* XXX: We do not worry about the concurrent register cacheline hang
> +	 * here because no other code should access these registers other than
> +	 * at initialization time. */
>  	for (i = 0; i < GEN7_L3LOG_SIZE; i += 4) {
> -		u32 remap = I915_READ(reg_base + i);
> -		if (remap && remap != remap_info[i/4])
> -			DRM_DEBUG("0x%x was already programmed to %x\n",
> -				  reg_base + i, remap);
> -		if (remap && !remap_info[i/4])
> -			DRM_DEBUG_DRIVER("Clearing remapped register\n");
> -		I915_WRITE(reg_base + i, remap_info[i/4]);
> +		intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1));
> +		intel_ring_emit(ring, reg_base + i);
> +		intel_ring_emit(ring, remap_info[i/4]);
>  	}
>  
> -	/* Make sure all the writes land before disabling dop clock gating */
> -	POSTING_READ(reg_base);
> +	intel_ring_advance(ring);
>  
> -	I915_WRITE(GEN7_MISCCPCTL, misccpctl);
> +	return ret;
>  }
>  
>  void i915_gem_init_swizzling(struct drm_device *dev)
> @@ -4391,15 +4389,15 @@ i915_gem_init_hw(struct drm_device *dev)
>  		I915_WRITE(GEN7_MSG_CTL, temp);
>  	}
>  
> -	for (i = 0; i < NUM_L3_SLICES(dev); i++)
> -		i915_gem_l3_remap(dev, i);
> -
>  	i915_gem_init_swizzling(dev);
>  
>  	ret = i915_gem_init_rings(dev);
>  	if (ret)
>  		return ret;
>  
> +	for (i = 0; i < NUM_L3_SLICES(dev); i++)
> +		i915_gem_l3_remap(&dev_priv->ring[RCS], i);
> +
>  	/*
>  	 * XXX: There was some w/a described somewhere suggesting loading
>  	 * contexts before PPGTT.
> diff --git a/drivers/gpu/drm/i915/i915_sysfs.c b/drivers/gpu/drm/i915/i915_sysfs.c
> index 3a8bf0c..b07bdfb 100644
> --- a/drivers/gpu/drm/i915/i915_sysfs.c
> +++ b/drivers/gpu/drm/i915/i915_sysfs.c
> @@ -204,7 +204,8 @@ i915_l3_write(struct file *filp, struct kobject *kobj,
>  
>  	memcpy(dev_priv->l3_parity.remap_info[slice] + (offset/4), buf, count);
>  
> -	i915_gem_l3_remap(drm_dev, slice);
> +	if (i915_gem_l3_remap(&dev_priv->ring[RCS], slice))
> +		count = 0;
>  
>  	mutex_unlock(&drm_dev->struct_mutex);
>  
> -- 
> 1.8.4
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch



More information about the Intel-gfx mailing list